JavaScript to insert the dynamic buffer

In the PDF form, Java script for a dynamic insertion stamp 'Received' or 'Approved' as well as of the author by default, date etc...

I created a PDF form button, when the button is clicked, the "Receipt" dynamic annotation stamp stamp to insert in the particular position. Please, let me know the java script for this action.

Make sure that you select a comment from stamp applied (using the mouse) before you run this code.

Tags: Acrobat

Similar Questions

  • With the help of JavaScript condition in the dynamic action of JQuery selector

    Hi guys,.

    I have a Setup master detail on a page.

    The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

    I want than the region of text element to only appear if the value * not listed * is selected.

    I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

    However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

    I guess I need some sort of NVL in JavaScript condition?

    I use APEX v4.2.

    Any advice would be appreciated.

    Chris

    Cashy wrote:

    I have a Setup master detail on a page.

    The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

    I want than the region of text element to only appear if the value * not listed * is selected.

    I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

    However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

    I guess I need some sort of NVL in JavaScript condition?

    I use APEX v4.2.

    Simple solution is to hide the region containing the element of text by default, using the style = "" view: no ' in the property of the attributes of the area in the region. " It will be always hidden when the page initially, but its visibility will be controlled by the DA subsequently.

  • What to do when the dynamic buffer HCL EC2 technology invites the warning

    Warning: current dynamics of buffer memory less than 10%. Please retrieve or save as soon as possible. Protection system must be more dynamic buffer. Please choose operation immediately:

    1 retrieve the data from the partition
    2. save the data in the partition
    Ratio of the alarm:
    Lower current dynamic buffer (10%)
                       
                                                       

    This is due to a software of HCL EC2 HCL utility installed on this computer.

    In the taskbar of HCL EC2 bin will be there.

    Right click on it. From the menu select take snapshot. It will take a minute leass.

    After that just restart the system.

    If you are unable to boot into Windows, restart the PC Home button press before the entry of the POST screen.

    HCL EC2 console will come. From that, you can select take snapshot option.

  • Insert the dynamic creation of statements

    Hello

    My version of db is: 11g Enterprise edition 11.2.0.3.0

    I am trying to create queries dynamically insert using the code below:

    declare

    v_cl varchar2 (4000);

    v_tn1 varchar2 (30): = 'T1 ';

    v_tn2 varchar2 (30): = 'T2 ';

    v_vl varchar2 (4000);

    v_id number 4: = 900;

    v_il varchar2 (4000);

    v_count number (3): = 1;

    cursor c1 is select column_name from all_tab_columns where table_name = v_tn1 order of column_id.

    cursor c2 is select column_name user_tab_columns where table_name = v_tn2;

    Start

    I'm looping c1

    v_cl: = v_cl | «, » || i.column_name;

    end loop;

    v_cl: = ltrim (v_cl, ',');

    v_il: = ' insert into ' |. ' v_tn1 | ' ('| v_cl |') values (';)

    for j in loop c2

    v_vl: = v_vl | Chr (10) | v_id | «, » || v_count | «, » || j.column_name |') ' ;

    v_count: = v_count + 1;

    v_il: = v_il | v_vl;

    end loop;

    dbms_output.put_line (v_il);

    end;

    The problem is with this v_il statement: = v_il | v_vl

    The desired output is to get

    insert into tn1 values (...)

    insert into tn1 values (...)

    .

    .

    But I'm getting

    insert into values tn1 (insert values (...) tn1)

    How to change the code above to get the desired result.

    Also, I'm getting ORA-06502: PL/SQL: digital or value error: character string buffer too small when I run dbms_out.put_line

    Please advice.

    I did a minor change, and it seems to work now.

    What I did:

    Declared all the variable as a CLOB

    And modified

    v_vl: = v_vl | Chr (10) | v_il | v_id | «, » || v_count | «, »...

    v_count: = v_count + 1;

    end loop;

    dbms_output.put_line (v_vl);

    The above change worked. Thank you.

  • Cannot perform the insert/update on the form of tables, due to the dynamic action

    Hi all

    I created a dynamic action that calculates multiple cells in a table.

    This feature works well, when I change the value of the associated cell then the computed value is changed by the dynamic action.

    But I am not able to insert or update the line in a table when the dynamic action is enabled. When I put the condition 'Never', then the line is inserted or updated without any problems.

    All guess where is the problem?

    Apex version: 4.1.1.00.23

    Jiri

    Nina wrote:

    I don't know why the 123,40 value (or other) is set to the next item in line (f09, fsc, etc.)
    >

    What is hidden and generated Apex elements are always included in the last cell (td) of the line. Thus, it has nothing to do with the next item, only the last cell.
    If you see the last cell of the 888 Page you will see probably the same type = "hidden" entries here also.

    Your problem is not related to the HTML fragment to the last cell in the row showing all those extra items, it's somewhere else.

    Oh, here comes the jQuery selector:

    var clickedRow = $(this.triggeringElement).closest('tr');
    
    $(clickedRow).children('td[headers="SAL"]').find("input").val(myCalculatedTotal);
    

    SAL, COMM, w/e. here you will find the TD with headers = "COMM" and all the input fields and the value of all the entries in total calculated. Your selection is not precise enough in this case.
    So, target the specific entry.
    With the code example:

    
    
    
    
    
    
    
    
    

    change the switch on

    $(clickedRow).children('td[headers="SAL"]').find('input[name="f08"]').val(myCalculatedTotal);
    
  • The call of the dynamic text file javascript function

    This is probably a fairly easy problem, but it seems to be confusing me. I have a JavaScript function just opens a new window, wrote a little html and captures an image to place in the window. The javascript is on the page my .swf into flash. It looks like this:

    < script type = "text/JavaScript" >
    <!--
    function newWindowLand (picWinLand) {}
    bigpicWindowLand = window.open (", ' picWinLand ',' height = 500, width is 660, scrollbars = no, status = yes, resizable = no" ")
    bigpicWindowLand.document.write ("image window test < html > < head > < title > < /titre > < body bgcolor = #FFFFFF leftmargin = 0 topmargin = 0 marginWidth = 0 marginheight = 0 > < Center > < img src =" + picWinLand + "height = 480 width = 640 border = 0 > < / html >" "")
    bigpicWindowLand.document.close)
    bigpicWindowLand.focus)
    }
    ->
    < /script >

    I got this link in my html page:

    (< a href="javascript:;newWindowLand('static_images/news/test_image.jpg')" > link < /a > test "

    and it works very well. I then pasted this link in my dynamic text file that loads into my .swf, and nothing happens. I see the text "test" and it seems to be clickable, but if we click on it I get nothing. Am I missing something really obvious here? TIA...

    I got mine to work. The problem was the ":;" in my anchor tag original-just need to be a colon by itself. I got it in fact that at the beginning, but my test showed that it works because of the new security with Flash 8 gibberish. As soon as I downloaded everything and lived test everything has worked well...

  • How to make a dynamic buffer only appear when the document is printed?

    I have a set of procedure only if viewed in PDF format electronically stamp must stay hidden... IF the procedures are printed, I want dynamic stand to appear in the printed version: 'printed versions of this procedure is only valid for 1 week after the print date.

    I created the dynamic stamp it works well I don't know how to be hidden until the print.

    Use a field instead of a stamp. A field can be set to be visible only on the printed copy and not on the screen.

  • can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

    can anyone provide a link to insert the image with the text on the button in the apex 4.2.6

    ReemaPuri wrote:

    in the workspace image:-resign.jpeg

    As a button? Seriously?

    Ok. First of all, because the image already contains text, there no point in including the same wording in the form of text on the button. Accessibility requirements can be met using re-sign as alternative text. 4.2, create an image button:

    Tag/Alt text: Re-sign

    Static ID: re - sign

    Style button: Image

    Button Image: & WORKSPACE_IMAGES.resign.jpeg

    To make the image looks more like a button, add the following CSS to Inline CSS property page:

    #re-sign img {
      margin: 0 2px 2px 0;
      border: 2px outset;
      border-radius: 4px;
    }
    #re-sign img:active {
      margin: 2px 0 0 2px;
      border: 2px inset;
      border-radius: 4px;
    }
    

    Finally, there is a bug in 4.2 that generates the incorrect URL for the button images, which requires dynamic action of Page Load to fix.

    Event: Loading the page

    Action: Run the JavaScript Code

    Code

    var resignImg = $("#re-sign img");
    resignImg.attr("src", resignImg.attr("src").replace("/i/", ""));
    
  • Switch on the dynamic call

    I use packet sniffer example in my code with a few changes to calculate the delay of my data.

    I need to make a dynamic call to run this VI at some point my main code and stop at another point.

    Just to test I put some delays between market, stop and get the time as below:

    But in VI that I call, the stop button is inside a structure of event... like here:

    So... even if I try to stop the VI in my dynamic appeal, it seems that my VI will not read this change... only read if I manually stop the VI.

    so I try to stop at the first VI but does not stop... what could be a solution for this?

    Thank you

    Thai

    Problem solved. I just inserted the stop button in the same case where is Timeout, now I can guarantee you that this value will be read.

  • Time of design and of the dynamically created controls

    I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

    I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

    In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

    Hi JC,.

    I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

    I hope this helps, JC.  Have a great day!

  • Starting problems. - RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll

    I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?

    I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.

    Hi EddieBryan,

    1. did you of recent changes on the computer?

    2. do you have security software installed on the computer?

    3. when exactly you receive the error message?

    Method 1
    Check if the problem persists in safe mode and after return with the result.
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    Method 2
    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
    I suggest that you configure the computer in a clean boot state and check if it helps.
    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    See section to learn more about how to clean boot.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on Start , then click run.
    2. type msconfig , then click OK.
    The System Configuration Utility dialog box appears.
    3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

    Method 3

    If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

    You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker

    http://support.Microsoft.com/kb/900910

  • HCl ec2 tecnology invites dynamic buffer

    WARNING: less than 10% of the current dynamic buffer. Please retrieve or save as soon as possible.

    Hi vittesh,

    When you get this error message?

    To better understand the question, please provide more details about the problem you are having, we will try to help you solve the problem.

    If this happens on the application of HCL, you can check with them for known problems

    http://www.hclsupportservice.in/

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The dynamic function of question regarding

    Hello

    Please find the attachment for the required scripts.

    Please help me how to run a package function dynamically in anonymous block. I tried to use EXECUTE IMMEDIATE but did not work.

    My requirement is I have a lot of emp_demo in which it contains 3 functions and I've created a lookup table which are inserted the names of functions. then I tried to read a function name after another using the loop and execution, but it shows PLS-00382: expression is of type incorrect error.

    Please suggest.

    Kind regards

    Phani.

    Hey Brad,

    Try this

    set serveroutput on
    declare
      plsql_block varchar2(200);
      c1 sys_refcursor;
      v_empno number;
      v_ename varchar2(20);
      v_job varchar2(20);
    begin
      for r in(select name as function_name from lt_emp_demo)
      loop
        plsql_block := replace('begin :rc := emp_demo.@FUNCTION; end;', '@FUNCTION', r.function_name);
        dbms_output.put_line(plsql_block);
        --
        EXECUTE IMMEDIATE plsql_block USING OUT c1;
        --
        fetch c1 into v_empno,v_ename,v_job;
        dbms_output.put_line(v_empno || ', ' || v_ename || ', ' || v_job);
      end loop;
    end;
    /
    
    anonymous block completed
    begin :rc := emp_demo.rpt_emp1; end;
    7369, SMITH, CLERK
    begin :rc := emp_demo.rpt_emp2; end;
    7654, MARTIN, SALESMAN
    begin :rc := emp_demo.rpt_emp3; end;
    7844, TURNER, SALESMAN
    

    See http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/dynamic.htm#LNPLS011

    "Dynamic SQL is a programming methodology to build and run SQL statements at run time. This is useful when the time writing programs versatile and flexible as ad hoc query systems, when you write programs that must run the database (DDL) instructions definition language, or when you don't know at compile time the full type of statement, the number or data SQL of its input and output variables. »

  • How to trigger a dynamic action of the dynamic list entry?

    Hi experts,

    I use the apex of oracle database 12 c 4.2

    I'm creating an application on jquery mobile theme 50 I need to create a script as I've shown in photo

    post.PNG

    select it user a floor and the ground must be highlighted and region tables should be updated and the corresponding

    floors tables must appear only without submitting the page

    I tried something else, but can not make it work

    I created the floor using dynamic lists how do I trigger the dynamic action to update the region of the table in the list of the selected floor

    question any help will be appreciated thanks in advance.

    Hello

    something to inspire:

    Dynamic JavaScript action

    http://www.eberapp.com/pls/Apex/f?p=blog:read:0:article:1695400346724960

    concerning

    J

  • Redirecting to a page after the dynamic action

    I stated a dynamic action of a button (its dynamic action of pl/sql). After its been pressed it fills a line in a table.

    I want to redirect it to another page, once completed the dynamic action. How can I do?

    PL/SQL D.A. have an indicator expected result, make sure that is selected.

    Then, action of true of JavaScript:

    Window.Location.href = ' & APP_ID.: 1: & APP_SESSION. :::'

    or simply add a real action of page submit and manage the re - run by a branch of the page?

Maybe you are looking for

  • remove the mini ipad books

    How to remove books downloaded from ITunes on my plu ipad mini. ? They do not appear in the ITunes library anylonger.

  • ProBook 6570b

    I have a small problem: I installed 8 64-bit windows on my HP probook 6570b (I have not installed before the other OS). In Device Manager, I have two "other devices": 1 system base of the unit, location: PCI Slot 2 (bus PCI 35, device 0, function 1)

  • TestStand 4.2: error call "LogResults" in "ITSDBLog" of "ZNIUGOL TestStand database"

    I just installed 4.2 TestStand and SQL Server Express on a Windows XP computer brand new.  In TestStand, I implemented the "Database" property, so he tested connection successfully.  But when I open the Demo/C/computer.seq file to test, it gives me e

  • Could not turn off my computer

    My computer does not stop when I click on the close button. I have to physically push the off button, what can I do to fix this? Original title: System Update updates microsoft windows

  • Windows Setup cannot reset the deployment engine. To install windows, restart the installation.

    Background: I bought a new 1.5 TB Seagate Baracuda disk to replace my current 500 GB drive. Symptoms: I removed the old drive and installed the new drive.  I try to install Vista 32.  I have spend entering setup, past the disk partitioning key, then