Javscript GMT Offfset works does not in devices BB6.0 (Non-torche)

Similar Questions

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka

• JavaScript TimeZone (GMT offset) work is not on the BB Torch

  Hi Blackberry Admins & developers

  I work for a software company which, among other things, develop HTML5 apps for mobile platforms.

  We use a handheld device Blackberry Torch 9800, original carrier of the phone is vodafone. However, we use WiFi instead of 3 G and the phone has not a data packet, blackberry or activation of MDS AFAIK.

  The version of the software is v6.0.0.246 (Bundle 694, platform 6.4.0.105)

  We are faced with a problem in the browser with a javascript function to get the current date unit, time & time zone: new Date()

  the problem is that the time zone (GMT offset) is always 0, no matter what we set up on the device.

  This was the scenario seen on another thread, but this thread specifically said that the problem is on "devices non-torche:

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/Javscript-GMT-Offfset-not-workin...

  We are prefer to use the same function, since the application is cross-platform and on iOS and Android, we receive the correct information.

  has this bug found and fixed in a newer version of the software for the torch? If this is not the case, can you please say if there are plans to fix in the next version?

  Thanks in advance
  DZucker

  Sorry to break it to you, but I no longer need this hotfix.

  While I don't know the exact version where this problem has been fixed, I know it's for OS7 (Torch 9800 and tastes)

  Software v6.0.0.526 platform 6.6.0.195 and upward correction.

• Windows 8 blue tooth does not connect devices

  Hi, Windows 8 blue tooth does not connect devices

  1 - Adding devices is interrupted and the phone always appears offline.
  2 and in the bluetooth icon (bottom right of the screen) the option 'allow a device to connect' is never on/available.

  I tried with multiple devices and they are all perfectly between them, has never worked with the computer! Who have already tried with the (uninstalled) disabled antivirus and it worked too!

  Hope you will reply soon

  Best regards

  JPCR

  Hi JPCR,

  It seems that Samsung has not yet released the compatible Bluetooth drivers for Windows 8. So, you can try to install the drivers in compatibility mode and check out. Here is the link where you can download the drivers for Windows 7.

  http://www.Samsung.com/us/support/owners/product/NP300E5A-A01UB

  Follow the steps to install in compatibility mode:

  a. right click on the driver installation file and select Properties and then tap or click on the compatibility tab.

  b. check the box run this program in compatibility modof e.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  Reference:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Let us know the results.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Adobe flash player not working does not or does not appear as an application under Tools, options

  Adobe flash player not working does not or does not appear as an application under Tools, options

  If you can't Flash 11.3 to work and need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Device Manager does not display devices

  Control Panel takes me to the MMC, but Device Manager does not display devices

  Hi Bandjo,

  ·         Device Manager is empty?

  ·         You have made any changes recently?

  ·         You have installed Windows XP Service Pack 3?

  Check to see if this article helps you.

  None of the items appear in the device list manager when you open

• my microsoft work does not work error message that I need to reinstall, but I don't have a disck because it was already installed when I bought at walmart

  I bought my dell computer 2009 Wal-Mart, that he has is already set up with windows vista basic... and now my microsoft works does not work it says I have to reinstall.  However, he is not come with a disc. so, how can I do without having to buy a disc

  Go here: https://smartsource.dell.com

  This is where you go to download programs that have been installed on your computer that you do not have a CD for.

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

  I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

  Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

  Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

• I downloaded and installed Firefox several times but it does not open because there is none of my profiles, how to get it?

  I love working with Firefox a lot. But once he started to open and download porn, casino & advertising Web sites independent of setting in her and me. I decided to remove Firefox from my computer and download again. But it does not open because there is none of my profiles. How can I get or create?

  Hi serge, please press windows key + r and open: %APPDATA%\microsoft\windows\sendto - should open an Explorer window. in there, rename the folder "Mozilla" to something like "Mozilla.old" and try to restart firefox again.

• HP Pavilion Elite m9543uk: BDDVDRW GBC-H20L CD/DVD doesn't work does not, but is in the Device Manager

  BDDVDRW GBC-H20L CD/DVD does not work after update to Windows 10 Pro Windows 7 Pro this in Device Manager & this PC but when I double LK on this take a long time to load (it is called playing autoplay but does ' t), then it says Windows cannot access the specified device, path or file. You do not have the appropriate permissions to access the item (I am an administrator with full control).  When I RC on the reader a list of options come & I play the disk after a long wait. but it is very choppy can you please help. I also tested for all the bad guys, but I seem to be clean.

  Again thanks for the advice I will now roll back to Windows 7