JDE is not USB

Similar Questions

• iOS10 update; iPad 2 Air not USB load with certified Amazon lightning cable

  iPad 2 Air and iOS 10: been using an Amazon certified cable lighting to load and iTunes connect via the USB port of > 1 year without any problem. Updated to iOS 10, now the certified cable doesn't load a USB port. It always connects to iTunes, but the sign of the battery flashes the fresh green symbol for 1 second then said stops and says 'no charge '. Tried on 2 USBs and 2 PC with the same result. Tried another brand cable via USB and it costs.

  When I plug this cable from Amazon in the wall charger, it will load. Seems to be something with the iOS10 not recognize the USB load now on this certified cable. I didn't call Apple support on that too, they have no idea what's going on. Their answer is to use an Apple cable of course. Any help is appreciated.

  The cable of the Amazon is located here:

  https://www.Amazon.com/DP/B010U3XVMU/ref=cm_cr_ryp_prd_ttl_sol_0

  It seems there is no real solution beyond using another cable. There were a few people with this problem since iOS10 came out, so it's likely Apple changed something in the settings. As they changed it, it's either a mistake which will mysteriously set with the next update or it's going to be permanent.

• Compatibility DAQmx and NOT USB-8451

  NEITHER USB-8451 is compatible with NOR-DAQmx?

  The USB-8451 housing does not NOR-DAQmx; It uses a separate driver and API (OR-845 x; ( the latest version is 2.0).

  It is compatible in the sense that you might have OR-DAQmx and NOR-845 x installed at the same time, because they are two independent pieces of software. It is not compatible in the sense that you cannot use the USB-8451 with the API OR-DAQmx case.

• Recovery process does not USB

  I am running into a problem of recovery running on my HP laptop.

  My laptop:

  HP PAVILION DM1-4010US

  I was using Ubuntu on my laptop for a while and did not preserve the Windows partion properly and I don't have a USB lead recovery (I know I'm stupid).

  So I have...

  (1) ordered the recovery from HP Media

  (2) it came as several labeled DVDs: recovery system 1 2 and 2 of 2 disc DVD driver recovery.

  (3) my laptop has no optical drive, so I created a picture ISO of the DVD 1 of 2

  (4) created a bootable USB key with the ISO using Rufus

  (5) booted from USB and ran "Recovery Manager".

  That is the problem.  Part on the new installation works very well (preparation of recovery), but eventually he wants to restart the system.  To restart, "Recovery Manager" appears again as if nothing ever happened.  He wants the entire process.

  I did something wrong?

  It's the fact that my USB does not contain that ISO to a DVD (DVD 1 of 2) a problem?

  Thank you!

  Yes - the second DVD contains the files needed to complete the recovery. Maybe you can borrow a USB CD/DVD player someone - or buy a.

• LabView is not USB device

  Hallo,

  I have LabView 8.5 installed and two LogicBoxes (NIMbox NDL8 and NAD4) via the USB port connected. By typing in the good NIMbox NDL8 USB ID in the

  All VISA

  everything worked well. Then I realized that this does not work for the other module, so I tried the switch cables and reinstalled the USB driver.

  The current situation:

  Windows XP detects USB devices without any problem - always has. However, all of a sudden I can't connect in LabView with them by typing

  in the USB - ID. All the time the modules never showed up to the MAX, but since they are not instruments NOR I think who had to wait anyway.

  I have no idea why it worked first in part and now it doesn't work at all.

  Even if my description of the problem is sort of vague - I'm new to LabView.

  I would really appriciate advice, I should check in order to get USB working again things.

  Thank you!

  Nathan

  Many have reported similar problems, until recently.

  Do a little research on the forum. Look also for "series problem."

  Although I never had problems...

  Try renaming the com e.g. com1 to com3 ports.

  Also install the latest VISA drivers

• does not detect not USB flash drive? __

  USB flash drive does not detect not?

  Hi AwaisAmarQazi,

  ·        He recognized before?

  ·        Do you remember recent changes made to your computer before the show?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the name of the device

  2. try the steps lying in the link below: why my computer doesn't detect my new USB device when I run Windows XP or Windows Server 2003? :http://support.microsoft.com/kb/314634

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sansa e280 is not usb mode in the menu settings and is not recognized by pc

  My sansa e280 is recognized by my pc where it was originally regestered, but is not recognized by another identical pc. It also has no usb mode in the settings menu, so I couldn't use the suggested by forum solution.

  Thank you very much! I understand it on my own through the main page of Sansa.com. Now, after the last firmware download it has 3 settings/USB modes: detect the DPW, msc and auto. Still no problem on my PC. The another, unfortunately, is 5000 miles away. Hope, it will work here, too. Thanks again.

• Operating system recognizes is not USB devices

  Also having problems with USB devices not recognized, I tried all of the suggestion in the forum so far... 3 xs... unplugged, battery removed, even left on overnite... did not work.

  r.Unning Vista Home Premium on a laptop MSI M670, updated everything. Peripheral USB work in other PC, turn on in the laptop but the OS does not recognize devices, in Device Mgr shows 'no conflict', "the device is working properly", I uninstalled, disabled, etc. & reinstall Vista does not work, either. I must be a solution!

  The I get no message when the device is plugged... That is to say: the thumb drive.

  Hello

  If you have tried all basic troubleshooting and device is showing to work properly and no noise of conflict-it you may need to reinstall the USB controllers to recognize.

  To remove and reinstall all USB controllers, follow these steps:

  * Click Start, run, type sysdm.cpl in the Open box, and then click OK.

  * Click the Hardware tab.

  * Click on the Device Manager button.

  * Expand Bus USB controllers.

  * Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  Restart the computer and reinstall the USB controllers.

  * Plug in the removable USB storage device and test to make sure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/310575

  Hope this helps,

  Steve <> Microsoft Partner

• Windows 7 does not detect not USB flash drive

  Hi, any help much appreciated on this. Windows 7 does not detect USB flash drives on my laptop. I know that readers of work on other computers and all the USB ports. He does not play sound when plugged in the first time and does not anywhere on my computer. Any ideas? Thanks in advance

  Assuming that you have several disks that work on other computers...

  If you have tried several USB drives on the same port

  AND

  This port does not recognize the USB device plugged in, while the port is not operational.

  IF

  All ports respond in the same way

  THEN

  You don't have either not installed the correct drivers

  OR they did not physically.

• JDE does not start

  Random today my JDE will start is no longer. When I double click the icon, I see Flash in the taskbar and then disappear. Very strange.

  I tried manually running the command in "ide.bat", and that's what I get:

  C:\Program Research In Motion\BlackBerry JDE 4.6.0\bin>start javaw-Xmx256 M - DRIM_RUNTIME =... \lib-DRIM_BIN =... \bin-jar IDE.jar

  Dialog box opens:

  Java Virtual Machine Launcher

  The main class not found. Program ends.

  I tried to uninstall and reinstall the JDE and tried to restart the computer, nothing happens.

  I should have responded to this issue with the answer: I think that the original error I might have a herring. Ultimately, it was my "Resource.cs" (?) file that ended up being very corrupt, and deletion which enabled the JDE to start normally.

  Thank you

  Daniel

• Skype is not USB web camera

  I've recently updated to v. office 7.28.66.101 Skype and he ceased to detect my USB camera.

  The system is able to detect the camera and camera works fine in other applications (even with UWP camera app).

  How to solve this problem?

  Well, I had to install the old drivers for Windows 7 make the visible camera for Skype. Now it's working.

• Who is idea for additional supercharging system, not USB

  I really hope that there is a trouble on the horizon for this extremely bad design. I have more Uncable or charger to drag to the car or in any country to load a Tablet fo any size and brand.

  If there is no way to load the Xoom via the USB cable, this ill-conceived tablet will find it back to the retailer. I can't believe that Motorola would could forget something so important on this device already overpriced...

  I may be Grouchy, but this really SUX...

  
  

• Why not USB-6509 allow setting input and output on individual ports?

  I have one of the new USB-6509 (96 digital i/o channels) commissions.  It has 12 ports for every 8 bits.  The manual says that you can define the inputs and outputs on a per port basis.  When I read an 8-bit port that I find it clears different ports that I put in place to be digital output.  They seem to be grouped into 3 groups of 4.  0-3, 4-7 and 8-11.  When I read from any single port within this group it erases the other ports in this group that I try to use as exits.  The result is that I can put only input and outputs in groups of 4 ports.  Unfortunately, we have built custom hardware based on the assumption that we could control the inputs and outputs on a basis of port by port.  I see this problem as well with my LabVIEW 7.1 program (see table), as well as the measurement and Automation Explorer.  Is anyone out there seen this problem with the USB-6509?  Anyone using it with success?  I also notice strange problems with power on, but I have yet to understand the model.  IM wondering if I have a defective material or maybe this new material still has problems.  I tried NIDAQ 8.7.1 and 8.8.  Same problem with both. Thank you.

  Thanks for the replies.  It was determined that the USB-6509 we have has a hardware malfunction that is causing the ports to interfere between them.  We are return to OR for repair or replacement.  For now, we used a PCI-DIO-96, which works correctly. Thank you, Andy

• 4620 HP print from wireless then does not USB print

  Product HP: HP 4620

  Impression of the OSs: OSX (wireless), Windows 7 Home Premium (USB connection)

  Problem: after that I have an OSX wireless printing, all future work print of the Windows 7 system sit in Quebec until the Windows box is restarted.  All further work of OSX after work Windows are also qued.

  Any help is appreciated.

  Try to run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03286146

  Alternatively, you can restart you Printer Spooler to see if that helps. Do you know how to perform this step?

• Error code 19 IDE CD-ROM drives BUT NOT USB CD-ROM

  I tried all the solutions online that I can find - uninstall the drivers, removed the CD rebooted and reinstalled and rebooted... no matter what I try, I can't shoot to work. I honestly don't remember what might have changed since I use often (family system). The system is entirely up-to-date via Windows Update of Windows XP. It's a DELL 4700. Since the purchase, I had to wipe/reinstall with non OEM XP, due to a virus problem at the beginning. I have a 2 to 4 GB upgrade memory. I added a second internal SATA drive. Recently, I installed an external USB on optical drive EZ-writer-it works very well. I would be grateful for any guidance for rethinking the role of the registry or to debug the original disks. Kind regards...

  Hello

  Run auto Locksmiths and verify.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Look for a red or yellow bangs in Device Manager and send back the same.
  Reference:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

  May you enjoy a look at the article below.
  http://support.Microsoft.com/kb/310123

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]