Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

Similar Questions

• HP Jet 7 Tablet 5709: 7 HP flow will not reset recover

  I went to reset the tablet to factory deleting all my files, etc. The Tablet has a 32 GB card in addition to the main unit.

  During the recovery process, a message appeared that the reset was able to complete. A Cancel button was presented to that I pushed.

  When I went to restart the Tablet, came the HP logo but nothing else. I stop and reloaded several times. The Tablet is now a brick...

  I then connected the tablet to my PC. 10 Windows PC does not recognize the tablet.

  What can I do to at least restore to factory settings?

  You can order a USB at HP recovery or do a new install of Windows 10 using the downloadable installation of Microsoft image, instructions are here.

  If you have connected the charging cable into the PC's USB port, the PC does not recognize the tablet of flow, it's normal.

• Windows 10 can not boot after installing the Bootcamp drivers

  I have an iMac late 2013 (21.5 "), and I just got 10 Windows so that I can install it using bootcamp. I spent a good part of two days trying to get Windows to work with installing bootcamp, but no matter what I do, the result is always the same. If I let bootcamp install its driver (as he wants when you start first in 10 Windows after installation), Windows will crash before loading fully at the next startup. He comes to see the windows logo pop up with the loading circle spinning around for a second, until what the circle all the sudden stops. After that, it restarts and I hear the iMac from sounds (this much quieter time for some reason any) and then it does the same thing. The third time that it restarts, it starts the automatic recovery mode and I get caught for the advanced boot menu. After letting Windows reinstall itself, it works fine except that it lacks some of the display driver (I can't adjust the brightness) and I also can not use the function keys on my apple keyboard, or the magic mouse at all.

  I tried to reinstall OS X El Capitan and then repeat the installation for Windows. I tried with the driver OS X Downloads for me in Bootcamp (version 6.0), and I've also tried using those newer that Apple offers for download on their site (Version 5.1.5769). All attempts of the result of facilities Bootcamp in crash of boot even when Windows is restarted.

  Windows is still usable, I just think it would work as it is supposed for a Mac wish. Why the bootcamp drivers break 10 windows? Has anyone else had a similar problem? If so, any suggestions?

  Thank you

  BC 6.x drivers are more recent and recommended for Windows 10 models 2013 and following.

  BC 5.x drivers are older and meant for W7/W8.1. Specifically, in your case, 5.1.5769 are not valid drivers for your model. iMac 21.5 inch 2013 requires such Software in Support of Boot Camp 5.1.5640 indicated in the installation of Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

  Publication date: February 11, 2014

  File size: 925,6 MB

  The system configuration required

  • MacBook Air (11 inches and 13 inches, beginning 2014)
  • MacBook Pro (retina, 13 inch and 15 inch, mid-2014)
  • MacBook Air (11 inches and 13 inches, mid 2013)
  • MacBook Pro (retina, 13 inch and 15 inch, end of 2013)
  • Mac Pro (end 2013)
  • iMac (21.5 inches and 27 inches, end of 2013)
  • Windows 7, Windows 8 and 8.1 of Windows, 64-bit

  It is not a problem of drivers BC. W10 requires updates that it shouldn't. Please see Windows crashing in 10, but know not why. as reference. I suggest that you follow the steps described in the linked discussion and test.

• Windows 7 will not activate after a clean install and several improvements to my computer.

  I bought a copy of Windows 7 Home Premium 64-bit.  I installed my old hardware running, but found Windows 7 either too many resources.  When there was enough money kicking around to upgrade my computer a few months later I did (new card mother cpu and ram).  Windows 7 would not start normally or in safe mode, my old installation of XP would not boot normally but would start in safe mode.  So I reinstalled Windows 7 with a clean install (reformatted my hard drive) and it works fine but now it won't turn on!  It says that I have to type in a different product key because I typed the product key cannot be used to activate Windows on my computer.

  I understand the need to fight against piracy, but the thought that I can't upgrade my computer without having to buy another product key is ridiculous!  There are solutions to this problem?

  Activate manually.  It is detect your previous installation and seeing this as an attempt to install the product on another computer.  It is a common phenomenon.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate the operating system.

  I hope this helps.

  Good luck!

  If this does not work (these procedures are for Vista, but I guess they will work with Windows7), and then republish your questiion in Windows7 Forums:http://social.answers.microsoft.com/Forums/en-US/w7install/threads where they can provide the procedure for this OS if it is different.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer with pre installed windows 7 no longer work after Windows installation 10

  Hello

  A few months ago, my son ordered a computer with Windows 7 pre-installed. He installed Windows 10 such as recommended with the message 'free upgrade'. Unfortunately, now the computer does not work at all and the computer doesn't seem to have a possibility of recovery (at least we cannot find it).

  In addition, the computer manufacturer does not meet one of e-mails and calls from some time. What can we do to recover his computer with Windows 7 or Windows 10 (I don't like which version of Windows)? Windows setup does not work 10 from scratch, the product key has not been accepted, probably because there is only a product key for a pre installed windows 7.

  Help, please!

  Kind regards

  John

  Have you checked to make sure that your drivers are up to date? Normally, this can resolve that many users experience problems after updating to Windows 10:

  How to: 10 things to do after installing Windows 10

  • How to: install and update drivers in Windows 10

  If the certificate of authenticity for Windows 7 sticker is connected to your computer, you can try to get the edition of Windows 7 then use your product key to reinstall:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  How to: perform a customized Windows installation

  See the section for Windows 7.

• Windows game are not maximized after Alt + tab on

  It seems that whenever I start a game, he struggles to remain maximized.  or if it starts fine and I alt + tab out of it, I will not be able to maximize again.

  If I click on the game in the taskbar, it will maximize to a black screen for a few seconds, sometimes flashing the screen game, reducing me then automatically on the desktop. If I click randomly on the black screen (hoping to activate something in the game) for these few seconds, the game will sometimes load back on the screen and remain stable, but only if I'm lucky and it's a pain in the neck.

  This has only been past moreso in the past months, but it seems more difficult to treat.  I see no changes significant I've done which might cause that.

  I have windows vista 64-bit, Ive tried to play with my display screen resolution and video game options real (my monitor is currently in 1920 x 1080).  Ive tried all sorts of task including alt + tab-switching or "switch to...» "in the Task Manager.  Ive down them as an administrator.  Ive changed the settings for compatibility for the .exe.  None of them have made no difference.  ive tried with several different games, all two (as old as 8 years) old and new games (new this year).

  If it helps to have a game especially allusion when trying to solve this problem, ive got starcraft 2 and dragon age: origins.

  Hey the egg.

  What is the number and the model of your video card and monitor?

  Since the problem is with all games, maybe try with a new driver for your video card. In most cases, get the latest driver solves these problems. If this does not work, you can go for method 2.

  Method 1: Update your video card driver

  For driver updates, see this link:update a hardware driver that is not working properly

  Method 2: Run the clean boot

  A little research showed that many background applications may interfere with the game causing unwanted results. The best bet is to prevent all third party applications to load to the top by performing the clean boot.

  See: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Message "Windows Explorer has stopped working" after the opening of the "Images".

  Hello.
  I have Windows Vista 32 - bit home basic OS with SP2.
  When I open "Images", I get a message saying "Windows Explorer has stopped working" with an option to restart the program, which just closes. The details of the message are:

  Signature of the problem:
  Problem event name: InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Information additional 01:40 d 4
  More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
  Information additional 03:40 d 4
  Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c7

  This error message comes just out of nowhere I do not install anything or make updates when this issue was raised. I tried to restart the computer, but it did not help.

  I checked for viruses, but none came.

  Then, I tried to do system restore, but it could not solve the problem.

  In addition, I used the command line to find the problem and found a few corrupted files, it has been unable to remedy.

  Details of SFC are:

  «2010-11-17 11:38:44, Member's file Info CSI 00000160 [SR] cannot repair [01:24 {12}] "settings.ini" in the sidebar of Microsoft Windows, Version 6.0.6002.18005, pA = Process_Architecture_Intel <0>...» »
  and there is more like that, but I don't know how to copy and paste these messages.

  I don't know what to do from here.

  I don't want to reinstall all of Vista. In addition, Vista is PREINSTALLED on my computer.

  Oh and I am not an expert in using the command prompt,-j' found how to do this in other forums.

  Please help on how to solve this problem.

  Thank you!

  Hello

  Norton search spyware however your question may be caused by or to the less aggravated
  by Norton.

  Norton/Symantec is known to cause strange problems and aggravate others. Better is to uninstall
  for a test by simply disabling will still allow pieces of it to install. Uninstall it and run the Norton
  Removal tool to avoid problems causing leftovers being left behind. The following recommendations
  to use when testing, even better all the time.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Norton Removal Tool
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 is not genuine after canceling the process of upgrading Windows 10

  Original title: 10 dirty Tower windows.

  Without my consent, windows 10 has interrupted a program I watched and installed itself. He left no turn of my laptop. After installation and upgrade one came the message asking to accept or refuse. I clicked on the decline. The TI reinstalled windows 7. However, at the bottom of the screen, a message appeared.

  "windows 7 build 7601 this windows 7 is not genuine ' why are they playing Weirdos?  Windows 7 Home premium comes with my computer. Now how can I get the real Windows 7

  Hi Linda,.

  Thanks for posting your query in Microsoft Community.

  • Have you tried the suggestions provided by Greg earlier?

  If you haven't tried the suggestions provided by Greg earlier, do so and explain the matter to the representative. Also, you can view the following thread below link and view suggestions issued by Andre Da Costa.

  Windows 7 Build 7601 this copy of windows is not genuine

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• The ColdFusion 64-bit windows setup program stops working after recent microsoft update

  ColdFusion 64-bit windows installation stops working after the recent microsoft updates and how I worked around it.

  My question is at the end.

  Deploying coldfusion 9 enterprise 64-bit on a trial version Windows 2003 64 bit what OS with OS data center all updates from MS (at 07/04/2011).

  Measures taken (remember, this is all 64-bit):

  1. the installed the base OS that has been slipstreamed with SP2.

  2 checked w / microsoft and 63 OS updates installed.

  3. launch the exe of the trial CF9.

  4. as soon as the first screen (the one that looks like it's the extraction of files) then finished the second screen (the one that says simply SEE Adobe Coldfusion 9) and the progress bar moves quickly 95% to the right and the installation application closes. No error, no nothing. No log file either.

  5. after a moment of silence disbelief (and a new attempt/reboot, etc.), I started to google. I found nothing. However, I found a post (thanks dspent!) which is useful in what he says how he managed to get a log file of all kinds, first extract the coldfusion_9_WWE_win64.exe file and launch the adobe_cf.exe by hand.  (Snafu Dspent install was different from mine, but his position has been very valuable and started me in the right direction.)

  6. has obtained a copy of the file rarunzipper and extracted from the coldfusion_9_WWE_win64.exe .

  7. in the windows directory created in step 6, I have launched adobe_cf.exe.

  8. the same thing (, the installation application closes. No error, no nothing. Log file No.).

  9. I look at the hs_err_pidxxxx.log file (where the xxxx is a number).

  10. I see inside this file, a disturbing message: 'a fatal error has been detected by the Java Runtime' then ' framework issue ntdll.dll ' , then ' the accident happened outside the Virtual Machine Java to native code ".

  11. OK, now I'm thinking ntdll.dll. Native code! It's like Java tells me that for some reason any, that he can't dance with the operating system.

  12. on a hunch, I decided to test a CF install again on a server with just the installation of SP2 64 W3K3 (ie: skip step 2 above this time).

  13 bingo! That the installation works.

  14. as a result, one of the 63 patches that I had downloaded from MS had triggered a problem with Setup see

  15. back on the first server (with MS installed security patches and that CF installs not on). In the adobe_cf.lax of file CF (one of the files extracted in step 6), there is a line that mentions where the installation gets it is java. Find this file, and check java version Installer uses. It is using 1.6.0_14 - b08.

  16. on the way to the Java website, and there is a newer version of java (1.6.0_24 - b07). Downloaded and installed IT.

  17. change a line in adobe_cf.lax :
  front
  lax.nl.current.vm=resource\\jre\\bin\\java.exe
  After
  Lax.nl.Current.VM=C:\\Program files\\java\\jre6\\bin\\java.exe
  (this assumes that you leave step 16 install to the default location)
  Save the file.

  18. run installation ... * IT WORKS ! *

  Obviously, the built-in java provided with the installation of the CF program is no longer compatible with some changes introduced by a recent update of MS on SP2 64 b. W2K3 platform

  And now comes the interesting part. Although I made the installer to use the new java, it had not incorporated into the generation of CF (ie: in following, you see always c:/coldfusion9/execution/jre AND the java.exe version that is located in this directory is the original version, not the latest version, I forced the installation program to use).

  On the surface, CF looks OK, but I did not test any application yet.

  And finally my
  * QUESTION *.
  Var java.home would be appropriate just to point to the new java directory? I see that the structure of directories and files are not exactly the same (well close) so I am certainly not break things by doing this, but instinct tells me that if the installer beat using the old version, then something else will bring down the road if I do not use the new version. On the other hand, the differences between files and directories is enough that it makes me very nervous with my skill set java limitied to make that decision. 

  Thanks in advance!
  Byron

  Hi Byron,

  Wow great post no doubt much of the information will be useful for those who have Win03 SP2 +. Must say not come across the similar problem on Win08 r2 SP1 +.

  So, to your question. Adobe (http://kb2.adobe.com/cps/894/cpsid_89440.html) security bulletin recommends to run CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do this. I take you installed the JDK and not only JRE 1.6.0_24? After installation of monitoring JDK as follows:

  Stop the CF - stop SERVICES.msc "ColdFusion 9 application server.

  Take a copy of CF\runtime\bin\jvm.config - so you have a backup.

  Change the line CF\runtime\bin\jvm.config find "java.home =" and comment it for example:

  #java.home=C:/ColdFusion9/runtime/jre

  Add the new line like and save next:

  Java.Home = C: / Program Files/Java/jdk1.6.0_24/jre

  Note he slashes and the location of the JRE (runtime): you must point to that of JDK, because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.

  Start CF via SERVICES.msc.

  HTH, Carl.

• My Windows partition is not bootable after creating a new partition

  Hi all.

  I use a Mac Air with El Captain 10.11.1

  My bootcamp with Windows 10 was running ok, today, I created a new partition to expand the windows partition.

  It was made in utiity Mac disc.

  After that windows no longer not bootable.

  Partition editing work on Mac OS and Windows.

  I have 3 partitions: Macintosh HD - Untitled - Windows.

  Here's the output of certain commands: (note that the windows partition is listed as disk 5)

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  MacBook Air-Ricardo: ~ Barbieri diskutil list $

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 38,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 22.3 Untitled GB disk0s4

  5: Microsoft data base systeme_windows 60.0 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 37,7 disk1

  Logical volume on disk0s2

  EF0DAAB2-0675-42BA-BBF0-503F6E586497

  Unencrypted

  MacBook Air-Ricardo: ~ list of cs Barbieri$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7132A7B6-34BF-44BF-A9C5-FC171DA3D0F6

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 38080155648 B (38,1 GB)

  Free space: 18948096 B (18.9 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 38080155648 B (38,1 GB)

  |

  + -> 1B3FC191-1C21-4882-8F49-AE4A205EEB9D family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume EF0DAAB2-0675-42BA-BBF0-503F6E586497

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 37708886016 B (37.7 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  MacBook Air-Ricardo: ~ Barbieri$ sudo TPG w - r show/dev/disk0

  Password:

  TPG: illegal option--w

  use: TPG [-rv] [Pei nparts] control device [options]...

  MacBook Air-Ricardo: ~ Barbieri$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:07 0 0 0-0 0 0 [0-0] HPFS/QNX / TO THE

  04:07 0 0 0-0 0 0 [0-0] HPFS/QNX / TO THE

  Thanks in advance

  1. in what year is your MB Air?

  2 Please after the release of

  sudo dd if account = / dev/rdisk0s5 = 2 >/dev/null | hexdump - C

  3 Boot Camp: resize the Windows partition.

  WARNING: Do not use other applications or windows to resize your partitions. If you do, you could potentially harm your computer and prevent its commissioning.

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• Desktop Window Manager has stopped working after loading of updates 12/10/10 MS

  Once the download and installation of updates for Windows 12/10/10 patches, Desktop Window Manager has stopped working.  Event viewer lists under Applications:

  Name: Application
  Source: Application error
  Date: 2010-10-13 09:59:47
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: has
  Description:
  The failing application name: Dwm.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc541
  The failed module name: nvwgf2umx.dll, version: 8.17.12.5922, time stamp: 0x4c5424d5
  Exception code: 0xc0000005
  Offset: 0x000000000007c160
  ID of the process failed: 0xb0c
  Start time of application vulnerabilities: 0x01cb6aefa117a51c
  The failing application path: C:\Windows\system32\Dwm.exe
  Path of the failing module: C:\Windows\system32\nvwgf2umx.dll
  Report ID: e6dfd048-d6e2-11df-9660-00271383b7fe

  The operating system is Win 7 x 64.  Video card is a Gigabyte GTS450OC1 with its latest driver running on an Intel DP55KG MB with 8 GB memory Corsair XMS3.  The system was fully functional and stable immediately before the update.  I don't know which of the 18 patches is in conflict with the nvwgf2umx.dll file.  Device Manager reports no hardware problem with any component.

  In my attempts to solve the problem, I run chkdsk f, sfc/scannow (which have reported no problem) and reloaded the video driver (without uninstall first).   Nothing works so far.  I even tried to defragment the master file with Diskeeper 2010 start time Table Defragger (based on another post, I've found), also without success.

  What is the reference for this?

  This may seem like the thing the more janky to post, but I got the same error several months:

  Problem event name: APPCRASH

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: nvwgf2umx.dll

  Fault Module Version: 9.18.13.1422

  Timestamp of Module error: 51427a 68

  Exception code: c0000005

  Exception offset: 000000000013fe0b

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: bd9d

  More information 2: bd9dfb84ef7bbf0c089fd3d5f079469b

  Additional information 3: ec39

  Additional information 4: ec39233315f018bea3fd5d4de7e9458f
  And could not cancel the record/re-record the dll it error out on an entry point missing or whatever.
  So what for some reason any worked for me is to rename C:\Windows\System32\nvwgf2umx.dll to nvwgf2umx.dll.bak (all other copies of this file are in the folder DriverStore).
  After that, I ran from an administrator command prompt
  net stop uxsms
  net start uxsms
  
  
  And miraculously all started working again.  I'm running a GTX570 with latest drivers nvidia from Scripture.
  Note: You probably shouldn't be move/rename things in System32 unless you are confident and have your data backed up.  It worked for me, but who knows you.

• I get a message indicating the my windows 7 is not valid after revenue at 10 Windows.

  * Original title: message invalid windows 7

  I downloaded windows 10 and wasn't happy with it. It wouldn't let me open an online session at all. I deleted windows 10 to return to windows 7 and now I get a message indicating the my windows 7 is not valid and I can no longer receive updates. How can I solve this problem. I had a valid product before I tried windows 10.

  Michelle

  The problem you have is that someone has, at some point in the past, installed a copy of HP OEM of Windows 7 Home Premium on a Dell computer. Microsoft license agreement restrict the installation of a copy of HP OEM of Windows 7 on a HP computer. So your installed copy of Windows 7 is a counterfeit.

  Your computer date of 2007, two years before the introduction of Windows 7. The original operating system when purchased new, would have been Windows XP or Vista. You could go back to one of those if you have a recovery disk; otherwise, you will need to purchase a new copy of Windows.