JHP wifi global ipass

Similar Questions

• WiFi doesn't work is not about ATT Atrix 4 G countries in certain European (and global)

  Hi, I have an ATT Atrix 4g and im he unsing in Europe in Slovenia, wifi will not work in my country, however once I go to one of its neighbours such as Austria, Croatia or Italy wifi starts working. Same thing happens to a few other ATT Atrix 4 G to users who use the phone in different countries of the world. After a few months, I finally managed to get the wifi works in my country and it was not using motorola technical support, or a motorola official support channels. I have figuered that the wifi driver that is used in the Atrix 4 G is not my country code inside, as well as some of those other people report that wifi does not work. Luckly I managed to change the drivers with some of a competitor of yours, and now wifi works for me and others. Now I'm nicely you ask dear Motorola Support, if it would be possible to update the driver wifi with the next update to one this reckognises all countries, or at least European ones (my country this title is part of the European Union and exists for over 20 years and his lack in your drivers, even Croatia exists as long as the Slovenia) (, which is not part of the European Union is supported in the driver - which is really a shame for you Dear Motorola).

  Cordially Crnkoj

  
  

• Key WPA - EAP business Wifi for OSX 10.11?

  I'm looking for months for a Wifi key that supports OSX 10.11 WPA - EAP Enterprise. I ordered about 10 already, but most of them only support OSX 10.9 or lower. But I need 10.11. Those who work with OSX only sustained 10.11 until this WPA - PSK.

  Any ideas? Any help?

  (I know that my mac supports WPA - EAP, but I need a stick to place it as close to the point of access to a public network - which can't change, I can't use repeaters etc..)

  I may be wrong since I have to confess I used only once WPA2-Enterprise, but I think that EAP would be part of the 802. 1 x security suite. EAP stands for Extensible Authentication Protocol.

  OS X took in charge WPA2-Enterprise and 802. 1 x for a long time and don't always work. I believe that as long as the WiFi adapter supports WPA2 then it will also support WPA2-Enterprise and therefore 802.1 x and EAP.

  Note: WPA2-Enterprise and 802. 1 x means also using a RADIUS authentication server. In theory it could be run on a Mac server and in fact Apple Server.app includes a copy of FreeRadius, even if you need to configure it manually.

  I found the following https://eshop.macsales.com/item/Edimax/EW7711MAC/ which is listed as Mac, El Capitan, WPA2 and 802.1 product compatible x.

  This adapter to the Web site less OWC is listed as including El Capitan drivers although the product on the Edimax website page lists only up to Yosemite.

  (Update - I have now found a driver Edimax list download page which is El Capitan - see http://www.edimax.co.uk/edimax/download/download/data/edimax/global/download/for _home/wireless_adapters/wireless_adapter... )

  This is why I feel that this adapter is admissible as Mac-compatible, El Capitan compatible and produced compatible WPA - EAP.

• No adapter USB wifi for 10.11.5?

  I had a problem for a year with my MBP 15' mid-2012 which keep lack of Wifi hardware.

  I tried several cables and cards to Air two BT2.1 and BT4

  Cable Apple part No.: 922-9750

  AirCard 2.1 BCM94331PCIEBT4AX

  AirCard 4.0 BCM94331PCIEBT4CAX

  Also reset SMC and NVRAM

  Also erase and install on regular and the recovery of the Internet

  I've seen several post on the web

  and no official solution to the problem of APPLE

  My MBP is out of warranty and logic board set me back $ 600 +

  Funny is that my LV works very well!

  I prefer to buy a usb wifi dongle to pay $$$ for repairs on the machine that be other than "NO PORTABLE" (read Ethenet) works flawlessly.

  Anyone with any info will be greatly appreciated.

  And APPLE if there is an official solution considers that is OQ.

  Have you tried the

  EDIMAX EW - 7822UAC AC1200 dual band USB wireless

  http://www.Edimax.com/Edimax/merchandise/merchandise_detail/data/Edimax/global/w ireless_adapters_ac1200_dual-band/ew-782...

  http://www.Edimax.com/Edimax/download/download/data/Edimax/global/download/for_h ome/wireless_adapters/wireless_adapters_...

• HP Pavilion 1240sa g6: WiFi does not work after Windows Installer 10

  After you have installed Windows 10 today my WiFi is not connecting. I tried updating the driver (Ralink RT5390 802.11b/g/n WiFi adapter) and he tells me its up to this day. IM assuming that this driver is the problem but don't know how I can fix it.

  My laptop model: HP Pavilion g6-1240sa laptop, Windows 7 Home premium (x 64)

  Hello:

  See if the W10 Ralink wireless driver works for you...

  TITLE: Pilot MediaTek (Ralink) wireless network card
  
  VERSION: 5.0.57.0 REV: A
  DESCRIPTION:
  the package contains the driver for the Mediatek (Ralink) installation package
  Controller wireless LAN in the laptop models taken in charge running
  Operating system.

  OPERATING SYSTEM (S):
  Microsoft Windows 10 32
  Microsoft Windows 10 64
  
  LANGUAGE (S): Global
  
  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt
  
  CORRECTIONS:
  -Provides the initial version of Windows 10 support WHQL driver.

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71571 .exe

• Pavilion G6: Wifi adapter upgrade Windows 10 questions

  I tried seriously to all solutions possible and still nothing.  Not only the solution that has been proposed to this topic on the forum like many others in other Web sites, as in the windows and mediatek/ralink and same forum forum on youtube and still nothing, I can't really solve this problem and I'm trying to ruin out of range of patience...

  I'll probably go back to 8.1 Windows because all solutions have failed...

  If someone knows a solution diferent/news please reply!

  My PC is a HP Pavilion G6

  My Wi - Fi adapter is a Ralink RT3290 802, and pilots are already updated.

  Kind regards.

  Hello:

  Since I know not what you have tried, or one of the hundreds of books of g6 model you have (if they extend over several years), the only suggestion I can offer would be to try the W10 Ralink WLAN driver.

  OPERATING SYSTEM (S):
  Microsoft Windows 10 32
  Microsoft Windows 10 64
  
  LANGUAGE (S): Global
  
  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt
  
  CORRECTIONS:
  -Provides the initial version of Windows 10 support WHQL driver.

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71571.exe

  If the driver above does not work, the most likely problem is the hardware revision RT3090 of the card you have is probably too old to run W10.

  Only the last model rt3090 made in the last two years will take place W10.

• Satellite Pro A200 - Wifi does not not after loading Win XP

  Hi, I'm new here and I apologies if this has been covered, I searched the Forum but came up to the top with nothing.

  I have a:
  Satellite pro a200
  Windows XP.

  My laptop was xp professional installed and the wifi on Board did not work.
  I had problems with the global laptop but the wifi worked. I formatted last night, installed a new copy of xp home and now wifi doesn't seem to be recognized. The light is on, the switch, but I can't get the laptop to recognize her here.

  I did not much I know, but I hope I can get it sorted.

  You have any questions, I will try and respond with as much information as possible.

  Thank you, my.

  Hello

  Please not that after the installation of Win XP, the BIOS needs to be updated!
  The Toshiba page should provide a special BIOS for Win XP OS update.

  A note of juice; the laptop could be equipped with different WLan modules and so you should be aware of chip right WiFi WLan card would not work if you try to install incompatible driver!

• WiFi not working after firmware update

  I have MB612 XPRT. Recently upgraded to the version of the firmware 4.1.110.MB612. Sprint.en.US

  After the reboot, the Wifi does not work. It gives "Error" when I try to activate it via the parameter-> & wireless networks

  Can someone suggest to restore the functionality

  https://Motorola-global-portal.custhelp.com/app/answers/detail/A_ID/77896

• [New Sony Vaio Pro] WiFi problem!

  Hey!

  I recently acquired the new Vaio Sony Pro 13 "."

  Everything seems to work admirably except for the Wifi card.

  In fact, the card works fine in a range of 15 feet around the router.

  But when I cross this beach, wifi download & upload speed drop strongly: download of ~ 20Mbps to 0, 5Mbps!

  This problem is clearly linked to the Vaio Pro as the other computers in my household are not such questions.

  What I tried to do:

  > Re-install card driver intel (available on the Sony site)

  > Change the properties of the map

  Unfortunately, these actions did not solve the issue...

  Do you have any idea what could be the problem and a way to fix it?

  A few ideas:

  > Card vice (bad connectivity,...)

  > Global issue with new laptops Sony Vaio Pro

  > Not good map properties

  > ???

  Hoping to get some answers,

  Kind regards

  Jon

  
  

• How to get wifi after windows starts?

  Hello, I have not found all the wireless settings on and bluetooth turned off when the OS starts. I always have to press Fn + F5 and turn it on again. How to do?

  so it seems I've thought about it. I have Setup Access Connections / global settings / allow radio wireless (Wifi, WiMAX and Mobile Broadband) be turned off when it is idle and now after boot OS is on... [Not very logical but:-] and now it will not turn off when unnecessary.

• Motorcycle G Dual Sim KitKat 4.4.4 (low WIFI signals)

  Hello

  Got the Kitkat 4.4.4 update 3 days back. After updating the device is delay and then more slowly before. And the main question for me atleast is the WIFI signals which are now LOW and SIM network loss.

  anyway to get around this? I read on another forum that wiping cache WOULD solve that problem. But I don't want to ROOT my device.

  Should I root?

  You don't need to root your device to clean the cache.
  https://Motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/A_ID/94946/p/30, 6720,8696

• Drivers WiFi for my Acer Aspire 5560

  Need my WiFi for my Acer Aspire 5560 drivers. I don't have have the disk repair for the Aspire, but has been reciveing a large number of errors and decided to use another disk to reinstall Windows 7. Once installed W7 still missed me my network drivers.

  If your 5560 is version 15 ":

  http://us.Acer.com/AC/en/us/content/drivers/3818;-; Aspire 205560% 20(15'') %

  Check if you have Atheros wifi:

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Atheros_9.1.0.209_W7x64...

  or Broadcom WiFi

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Broadcom_5.100.235.19_W...

• WiFi guard falling on my newly purchased Aspire V5 - 122P

  My WiFi guard fall on my Aspire V5 - 122P.  I don't know if there is a problem with Windows 8, or if it is a product problem Acer?  Any suggestions as to how I can keep a stable WiFi without having to reconnect to the router whenever it falls?  Last night, I had to log at least 6 times before I finally gave up and waited until morning to use my desktop (which I now use this type).

  Hello...

  You can install the new wireless network card driver: http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_10.0.0.245_W8x6...

  Here is the link to download and install the new update to the BIOS: http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.08_A_A.zip?acerid=635112704441155009&S...

• WiFi and bluetooth won't turn on

  Xperia Z2 (D6503)(Lollipop 5.0.2) (23.1.A.0.726)

  WiFi and bluetooth does after I've turned off airplane mode after that I woke up

  I already tried reboot, safe mode and factory reset but it is not always correct it

  Any resolution?

  Hello

  If Wi - Fi and/or Bluetooth is not on and that you have completed a software repair via PC Companion, is unfortunately not a lot more we can do. I suggest that you have your phone reviewed by a technician at an authorized service center. You can contact your local support team for more information on the nearest Center of service or how to proceed with it in the best possible way:
  http://support.sonymobile.com/global-en/contactus/

• WiFi Hotspot question!

  Hello

  I just got SO - 01 G Docomo Z3 Xperia.  This is already achieved the sim lock feature deactivation code.  So I can use it on the network Lte and 3G (Trinet Dtac) in Thailand.  Everything was fine until I turn on the WiFi Hotspot feature.  All devices (Sony Vaio PC and mini iPad 3) were connected to Z3 without problem.  But no activity on the internet was not working.  All devices are unable to browse the internet, facebook not connect, etc.

  So, I got a seroius looking at all aspects of management of telephone network.  I discovered the APN setting which could be visible at any time when you look at, you use cell phone networking or not.  However, when the WiFi Hotspot is activated, then the parameter APN was empty and all settings has been disable. All access points have been disappearing.  Then disable the WiFi Hotspot feature, any parameter in the page of the AFN were back as usual.

  I have concluded that it is the root of this problem.  But do not know how to fix it!
  Everyone here has found a solution to this issue, please help me.

  I thank in advance

  PS Adroid 4.4.4

  It is the right way to solve the problem with block WiFi Hotspot. This could be the problem with some Z3 with some some company like NTT Docomo, AU, Softbank or even three Mobile to the United Kingdom. This is not required at the root of your Z3.

  It can be a little difficult for the generation of people "point and click", since it involves with command line in Windows.

  Let's start:

  1. you need a PC with Win 7, 8 or 8.1 (not so sure on Xp). Also, having a Java runtime installed (www.java.com)

  2. Goto https://developer.android.com/sdk/index.html#top , then download Android SDK Tool Kit (no need full Adroid Studio Suite). Install it on your PC, if you haven't, yet.

  3. pay attention to where it installs to. normally it will be goto C:\\Program Files (x 86) \Android\Android-SDK\Platform-tools

  

  4. then take a look in his file for the adb.exe file. If it is not present, you install from Android SDK Manager like that figure. Check on Android SDK Platform-tools, checked on updates/news and installed then click on install. ?... package.

  

  5 Goto your Z3 if you still not enable developer option on your phone. GoTo > setting > about phone > tab on built number 7 times. Option developer goto check then the USB debugging.

  6 connect your phone to the PC using the USB cable wait until your PC displays connected Z3.

  7. Open command prompt on your PC. Then navigate to the C:\\Program Files (x 86) directory \Android\Android-SDK\Platform-outils.

  

  8. in the command prompt window, type" abd shell "and enter. Then what shell open, type the parameters" put global tether_dun_required 0 "then enter.

  9. wait until the complete command shell.

  10 disconnect you Z3 then put power off and power on.

  11. now you phone should perform a normal activity of WiFi Hotspot.

  CR. People in 'talk.sonymobile.com' and 'droidsans.com '.