JO 3830: Device Installation failed with 2081883393

Similar Questions

• HP DeskJet 1512: DeskJet 1512 Installation fails with Windows 10

  I just updgaded my g7 HP Pavillion from Windows 7 to Windows 10 and I can not get my DeskJet 1512 to work.  I went to the HP site to shoot down the latest drivers from my drive for installtion of origin has no Windows 10 drivers on it.  Driver downloads, but the installation fails with the message: "the an installer for this device cannot perform the installation at this time."  I have administrator rights on my laptop, no one else is logged on, and I have no other applications running.  Any suggestions?

  Hey there John!

  Please try my suggestions and getting back to me. You can try downloading and running the print and Scan Doctor then choose "Difficulty of printing" and let it run its course. See what the end results you show here and then try again to print. Please also let me know what the results show.

  Try printing a few programs various (Notepad being one of them please) to see if the problem is with a single program, or all of them. Maybe a firewall can block the connection, try to leave this option off when you try to print from the few programs.

  Good luck! Enjoy your day

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• OfficeJet Pro 8610: driver installation fails with an error on hpvyt13.inf persistent 1627

  The printer driver installation fails with:

  Setup error

  Call to DrierPackageINstall returned error 1627 for package
  "C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"

  Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).

  Hello

  This can happen for several reasons, most common duration to a problem with the registry permissions.

  I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):

  http://www.MajorGeeks.com/mg/getMirror/tweaking_com_reset_registry_permissions, 1.html

  Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.

  Then try to reinstall the HP software and check for the difference.

  If the same continues I suggest contacting HP sopport to continue such troubleshooting.

  You can find the detais contact for your region below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Hope that helps,

  Shlomi

• whean I run any program related to windows, finally installation failed with error code: (0x80070005)?

  I tried to run the .NET framework. All files are downloaded, but finally the installation failed with error code: (0x80070005)

  NET FRAMEWORK 4 fails installation

  1) download setup of .net 4 by http://www.microsoft.com/download/en/details.aspx?id=17718

  2) double-click the downloaded file to start the installation

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• Windows10 installation fails with the error code 80200053. Update Windows product unresolved error, code 80070057

  I'm running Windows7 and have attempted to download/install Windows 10.  The Windows 10 download/install fails with error code 80200053.  Troubleshooting Windows Update product unresolved error code 80070057.  How should I proceed?

  OT:

  Installation of Windows 10

  I think that this error has something to do with the Windows updates blocking antivirus.

  Try this:

  (1) disable the anti-virus and all others no essential programs

  (2) type in services.msc RUN which will take you to the 'services' and search for Windows Installer mine has been set to manual so leave it put there and just start it

  (3) now, run windows update and wait for your window installed correctly

  (4) restart the computer

  Let me know how it goes!

• Failure of the installation of the Windows SDK on Windows 7 x 64. "the installation failed with the return code 5100.

  I try and install the SK and it fails for Web and ISO Setup > DVD drive. Same error every time:

  12:22:50 Wednesday, July 11, 2012: C:\Program Files\Microsoft SDKs\Windows\v7.1\Setup\SFX\vcredist_x64.exe install failed with return code 5100

  The following lines are less useful because they suggest to go to a place that I did not.

  12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: product Installation Microsoft Windows SDK for Windows 7 (failure): Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: In SDKSetup.Product.ConfigureRelatedSfx () at SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent)
  12:23:21 Wednesday, July 11, 2012: [SDKSetup] Config_Products_InstallNew: complete the installation of the new product: Microsoft Windows SDK for Windows 7
  12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: software Windows (failed) SDK installation: Installation of the product 'Microsoft Windows SDK for Windows 7' reported the following error: Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent) at SDKSetup.Product.SetupProduct (TaskMode taskMode, ManualResetEvent CancelEvent) at SDKSetup.ProductCollection.SetupProducts (TaskMode taskMode, believing believing, ManualResetEvent cancelEvent) to the SDKSetup.ConfigProducts.DoCurrentTask (Group TaskMode)

  Any ideas what could be worng? The rest of the log file is too big for this message but I can send it to someone who can help.

  Hello

  I suggest you try the steps listed from the link below,

  Windows SDK fails to install with the return Code 5100

  http://support.Microsoft.com/kb/2717426/de

• Windows 8 installation fails with the error "the product key entered don't match any available to install windows images.

  I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?

  Original title: Installation of Windows 8

  Hi Qadir,

  The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  I hope this helps. If you have any other questions, we will be happy to help you.

• Muse update installation fails with the error: DW071 & DW0003

  Here is the Setup log error:

  Exit code: 7 please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071... - Summary - 0 fatal Error (s), 3 (s) - payload: dotNet 4.5 4.5.0.0 {B89609E0-1A98-11E5-9217-A35DB58AA028}---ERREUR: DW071: ERROR: DW003: payload of third party installer NDP452-KB2901907-x86-x64-AllOS-ENU.exe failed with exit code: ERROR-2145124329: cannot install .net framework.

  I have already completed the installation of repair on all C++ applications and installed the dot net 4.6 update and restarted the computer. 

  Hi ,

  Please, try the following steps:

  • Uninstall Adobe CC of the machine (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Set to "Full control" permissions on the files of Adobe for all users in the following locations:
    • [System drive]: \Users\ [user name] \AppData\Local\
    • [System drive]: \Program Files (x 86) \Common Files\
  • Restart the computer.
  • Install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

  Kind regards

  Nicos

• Installation fails with no explanation!

  Hi all

  I am trying to reinstall everything the basic drivers for my c309g-m, after reinstalling XP and upgrade to a new netgear router. Now, I know the printer installed on the network ok, because I can find it, ping and even load its web page and see there is ink levels etc. The problem is that the installation driver receives all the way to the right (after successfully find the printer) and tells me "she didn't." How useful...

  So I click Next and it sticks a link 'add device' on my desktop, so I can repeat the same frustrating experience.

  I tried the options of cable and wireless in the page type of connection because while my computer is connected by cable to the router, the printer is wireless and so is the router. That kind of depends on your point of view as to whether the connection is wired or wireless isn't? This means your connection from the PC or the end of the printer? that is who should I click? I tried both, although - same result. He finds the printer then diagnostcs bit network it just says "printer installation failed to complete.

  Ahhhg! It must be the error message less useful that I have ever met!

  Help... Please... anyone?

  EDIT: I tried to delete my AVG anti-virus as the installer didn't warn that software AV can cause failures but that doesn't seem to make a difference.

  Ok

  Solved. I went back to the software on the CD and it worked. I can only conclude from there that the latest version of the software does not work on my system for some reason any (or maybe just does not work, period).

• Hyperion 11.1. 2.0 installation fails with ' a few pots referenced do not exist.

  Hi all
  
  I try to install Hyperion 11.1.2.0 on my laptop. If the requirements document says that the operating system is windows 2003 or 2008, I read that people are able to run on other OS' as well.
  
  I downloaded the files below:
  
  V20779-01
  V20782-01
  V20783-01
  V20790-01
  V20792-01
  V20799-01
  V20800-01
  V20801-01
  V20802-01
  V20843-01
  V20850-01
  
  I have the card installed loopback and OBIEE 11 g running on weblogic server.
  
  The installation of the EMP crossed successfully as I see in the newspaper. But when I try to configure the "EPM System Configurator" command ends with the below error message:
  
  ---------------------------
  
  Preconfigured running check...
  Performance audit EPM_ORACLE_HOME...
  Value of the EPM_ORACLE_HOME environment variable: F:\OracleBI11G\EPMSystem11R1
  Value of JAVA_HOME environment variable: F:\OracleBI11G\EPMSystem11R1\... \jdk160
  _11
  Check EPM_ORACLE_HOME successful
  Running. check oracle.products... Oracle.Products successful check
  Pots running manifest check...
  Time spent for parsing manifests: 220 ms
  Maximum depth reached in pots: 6, while the restriction: unrestricted
  Analyzed 383 manifests
  Total jars and classpath entries met: 383
  Total non-existing referenced classpath entries count: 22
  Total of classpath to check items: 67
  ERROR: F:\OracleBI11G\modules\org.apache.ant_1.7.0\lib\xercesImpl.jar not
  There are; depth of the file: 3; referenced from F:\OracleBI11G\EPMSystem11R1\common\jlib\
  11.1.2.0\ctg.jar referenced from F:\OracleBI11G\EPMSystem11R1\common\jlib\11.1.2
  .0\epm_j2se.jar referenced from F:\OracleBI11G\EPMSystem11R1\common\config\11.1.
  2.0\configtool.jar
  FATAL ERROR: Pots manifest verification failed with the message "some referenced jars don't."
  t exist.
  Output in 30 seconds
  
  ------------------------------
  
  After reading a similar position in OTN, which suggests that this could result from OSH not installed correctly, I reinstalled OHS successfully.
  I still get this error. Can someone help me how to get around this problem.
  
  
  Thank you
  Sandeep.

  I had the same problem with you. If you check in your physical directory, you cannot find F:\OracleBI11G\modules\org.apache.ant_1.7.0. Maybe when the installtools installed the EPM system, he detected that apache had been installed by OBIEE. You might find some F:\OracleBI11G\modules\org.apache.ant_1.7.1. The way I took to configtools worked was by copying F:\OracleBI11G\modules\org.apache.ant_1.7.1 to F:\OracleBI11G\modules\org.apache.ant_1.7.0 and re run the configtools.

  Now I got another problem when I tried to deploy the service foundation on weblogic. He gave me EPMCFG-10067: could not get the user admin for the domain name.

  Try to copy F:\OracleBI11G\modules\org.apache.ant_1.7.1 to F:\OracleBI11G\modules\org.apache.ant_1.7.0. Perhaps after that you can help me solve my problem.

• Windows 2008 SP2 installation failed with error code 0 x 80041002

  Hello

  I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.

  I tried the steps in http://support.microsoft.com/kb/947366:

  1 uninstalled antivirus.

  2. install KB947821 analysis tool

  3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

  Without success. What should he do next?

  Thank you

  Frank

  Hi Frank_673,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.