JO 8600 Pro scanner is not recognized by my bank online.

Similar Questions

• OfficeJet Pro 8600 pro, I can not scan to a NAS or my linux box. The error of the Linux box is:

  OfficeJet Pro 8600 pro, I can not scan to a NAS or my linux box.  Web browser for the Linux of the error box is: "you can't use this feature because it has been disabled."  For more information, contact your network administrator or the person who set up the printer. When I try to send the file to a NAS by IP address, password, and account name it tells me that the file is not found.  I can get on the site by copying the ip address and the path to my dir browser.

  In the Linux box, I can print to the printer.

  Sorry, but HP does not support the Linux operating system.  The only thing that HP offers for Linux support can be found here.

• DeskJet 1050 scanner is not recognized

  Just bought the series HP Deskjet 1050 J410 running on Mac Mini OSX 10.6 - hip and let it download

  drivers.  Printer works but scanner is not recognized.  Read a number of posts on similar problems, but

  you lost.  Impossible to find a way to uninstall HP printer sofware - is not in the applications, and that's what I'm

  told to look for!

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Yoga Pro 2 - display not recognized in windows (hardware or driver problem?)

  Out of warranty by a month!

  Yoga Pro 2-256 gb, installed a new wireless card a month ago. Windows 8.1

  The touchscreen still work while the screen is black.

  System restarted after the mode 'sleep', in my opinion.

  The Lenovo logo is displayed, seems to load Windows, but when windows loads (I don't see it so it is a hypothesis of load) drafts of the screen and the black light is on.

  Can I connect an external monintor that connects after the return from sleep mode (odd). Who then off the backlight.

  When the external monitor, the internal screen is not yet recognized by windows.

  When I boot in safe mode, the internal display works fine with of course limited capabilities.

  I rebooted on the support site display drivers.

  Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.

  Someone at - he of the clues as to what my happen? Hardware, driver etc?

  Can what information I provide?

  It is a pretty weird problem with contradictory observations.

  (1) screen working in Mode safe but not regular boot. (So not the hardware problem)

  (2) display on an external monitor in normal mode. (So, no drivers issue)

  Have you installed the wireless card yourself? You unplug the cable from the screen during the installation of the card?

  Could you re - open and check that all connections are good?

  The Wi - Fi card works well?

  I also recommend a complete reset of the laptop to eliminate the possibility that it is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure you make a backup on an external drive for your personal files.

• Acrobat Pro for Mac not recognized 11.0.14

  I received the notification there was an update to Acrobat Pro.  I went through the usual and accepted procedure the automatic update process.  He failed.  Then, I downloaded the 11.0.14 update from the Adobe website and tried a manual update.  When I tried to mount the file AcrobatUpd11014.dmg, it says, "the following disk image cannot be opened because the image is not recognized.

  No idea how to get a copy valid disk image so I can update my program?

  I tried the methods described in the article and nothing worked except a complete re-installation of the program.  Therefore, Acrobat Pro is now 11.0.14, but it was not easy to solve.

  Thanks for your help.

• OfficeJet Pro 8600 Plus: Scanner will not install software stopped working/Easy Start

  Unable to scan to computer, but has worked in the past. Error message indicates that the software HP for the Scan of the computer could not be located.  Have been trying to install it, it seems to be downloading but then says that it cannot install because no internet connection.  The connection is fine, works for everything else, shows very well in the status reports.  Tried several times, restarted the computer, nothing seems to work.

  Hi @SD58and welcome to the Forums of HP!

  I'd be happy to help you to install the software for your more than 8600. Using Safari or another browser? It seems strange to me that you can download the software, but then can not install, the installation requires no software. However, the Easy Start probably reaches out using internet to locate appreciate software to install. That being said, I feel the question could be linked so browser that I wonder what browser you use and if you could try another.

  Please let me know the result of using another browser and we can go from there. If using another browser resolves the issue, please click on accept as Solution to identify your post as solved.

  Thank you.

• HP Officejet Pro 8600 Plus: scanner does not connect

  Help, please.  I have plugged in any place and unplugged, reset several times.  I keep getting this same error msg.

  The printer works fine but the scanner won't.

  Error Msg:

  Unable to connect to Debra PC/Scan docs.  Make sure that the remote computer is turned on.

  Hello

  Glad to know that the problem has been resolved.

  Marking this post as a solution it will be easy for others to see you the message easily.

• Venue 11 Pro 5130 keyboard not recognized battery

  My coming Pro 11 works for mobile keyboard, somehow, but the Tablet no longer recognizes that there is a battery inside.  The battery monitor simply indicates the battery 2: absent.

  Can someone throw any idea on this issue?

  I had a combination of these issues on two different keyboards.

  The first keyboard was the issue when the battery has been recognized but not load or unload. It also did not provide when connected directly to the charger. Subsequently fixed by removing the keyboard, disconnect the battery connector, fix the dock and then re-connect the battery.  These instructions to disassemble the keyboard: [view:www.youtube.com/watch]

  The second keyboard arrived, and the battery has not been recognized by the Tablet PC.  A fast charge directly with the usb charger seems to give enough charge for the battery to be recognized and operate normally.

• Laser color HP jet pro M277dw: Fax not recognized

  This printer has been connected to our network (wired to our router) and everything worked perfectly.

  Then the router connection has been moved to another port of the router and then focused on the fax machine failed.  In the device window and printer, it was more like a Fax M277dw and the manufacturer has not been recognized.  So I thought that I remove it and reinstall but that was not possible.
  I tried to restart the configuration of the fax, but it did not recognize my printer and said the IP address to be updated.
  I added the printer again and then run the fax configuration and everything went well, but I'm not yet find a HP M277dw fax in printers and devices window.  The fax only on the page is the generic fax.

  What should I do?  Should I uninstall everything and start over?

  Thanks for your suggestions.

  I ended up uninstalling the printer and the related pilot and then reinstalling everything and now all is good.  Somehow I must have lost the fax driver.

• Satellite Pro A100 is not recognized any amount of RAM

  Hello

  I have a Satellite Pro A100 and I just bought 1 GB of additional memory. There are two locations, each with a capacity of 1 GB.
  When I put the new memory into the slot and the old 512 MB original memory in slot B and the computer says it is 1 GB.

  I have them two-way round so that the 512 MB is has the 1 GB in B. Now the computer says that there is 512 MB.
  Is there anything I can do to work B slot? I have the latest version of the BIOS update.

  Thanks in advance.

  Hello

  > original 512K of Ram also works in A slot, but not in the housing B.
  This looks like your slot B is defective, mate :(

  I think that, in this case, you can't. You can swap the card mother but that s all.

• Satellite Pro 6100: disk not recognized HARD - error IDE #0

  I just replaced a failed HARD drive from MK4019GAX in my 6100 Pro of the Satellite with a MK4026GAX and have tried to install XP Home. I can't recognize the hard drive of the computer.

  When I boot, I get a message ERROR IDE #0 before installing Windows, then a message saying that all third party SCSI drivers should be installed first. (I'm starting with the Windows disk in the drive) then when it is at the end of the installation process a message saying that "put in place did not any hard drives installed in your computer.

  If I boot without the Windows I'm getting PXE - E61 Media test failure.

  When I go into the BIOS ACPI BIOS version 1.90, under devices "Mode HDD = used (s) ' I can't get in to change and there is nowhere else that seems related to the hard drive (apart from the boot priority section).

  I read on a forum somewhere that there could be problems getting the BIOS to recognize a new HARD drive.

  It is a common problem for this model, or is the new hard drive may be defective?
  Is there a workaround or a solution?

  If all requested assistance right.

  DM

  Hello

  This error message indicates that the HARD disk drive was not properly acknowledged. The fact is that this unit uses a regular IDE (ATA-5) interface and the new HARD drive is supported by this interface.
  In this case, I assume that the HARD drive has not been installed correctly. Try to remove the HARD drive and check the connections.
  The other possibility is that the HARD disk controller is dead.
  In this case, the service partner must check the laptop.

• Mac pro, USB keyboard not recognized at startup

  my mac pro (trash) is a wonderful device. Lately, however, it does not recognize a keyboard plugged in USB to start.

  I am at a loss to explain it. I need help.  Advice, anecdotes, guess wild welcome.

  my setup is like this:

  CENTRAL PROCESSING UNIT

  Monitor 27 "Apple (hub)

  Extended keyboard Apple USB

  USB hub (USB2, apparently, that was not what I paid for)

  Wacom Tablet

  Logitec mouse (no driver installed, Logitech *, but the mouse is great he is 15 years old)

  charger for Iphone

  beats headphones cable

  iMic USB audio

  The question seems to have started just after I took my computer to the site, when that happens, I use a keyboard and bluetooth mouse. I immediately told my mac to forget the keyboard and the mouse after bringing it back to the House. didn't let it go, there is no moments where he had 'speed' of any kind. Always moves in a bag built to waterfield.

  Model name: Mac Pro

  Model identifier: MacPro6, 1

  Processor name: Intel 8-Core Xeon E5

  Processor speed: 3 GHz

  Number of processors: 1

  Total number of cores: 8

  (By heart) L2 Cache: 256 KB

  L3 Cache: 25 MB

  Memory: 32 GB

  The system version: OS X 10.11.3 (15 d 21)

  Kernel version: Darwin 15.3.0

  L3 Cache: 25 MB

  Memory: 32 GB

  Based on my experience, your extended keyboard usb from Apple is the oldest plastic or the most recent aluminium? Based on which you have a branch above Apple usb extension cable. Anyway look at the end of the cable usb and it is most likely has that match unusual for her, this little triangle. It can fit on the Mac Pro USB, but can be a little bit loose as an adjustment. If you use a newer Apple usb extension on the older plastic Apple usb keyboard, this isn't a good fit. If you use the old extension of usb Apple on the most recent alum Apple keyboard, which is not a good fit.

  So low line trying to look at the adjustment of the end of the usb in the Mac Pro or hub or ver, you connect to. I got this problem which caused two problems: I was using the older usb Apple with the new Apple alum keyboard extension cable.

  1. frequently the keyboard did not react, looked dead

  2 - beta install for starting seeds would start on the hard drive to complete the installation.

  Given that I have "corrected" the usb extension appropriate keyboard usb Apple alum both problems went away.

• LaserJet Pro 400 - M475dw, not recognizing USB drive-resolved

  I've been scanning to .pdf on a USB for about 6 months on my LaserJet Pro 400 - M475dw.  All of a sudden, it says "Insert USB Flash drive" whenever I try to scan, even if there is a pre-installed flash drive.

  I tried all 3 USB keys I've already used, more a few others.  I also tried their reformatting.  All to nothing does not.

  Today, I have updated the firmware of the printer to see if it would help - but no.

  Tried to turn it on and out, several times, including leaving them for a few days.

  Has anyone else had this? Did you solve it?

  P.S. This thread has been moved from Laserjet multifunction and all-in-one. -Hp moderator of the Forum

  handsome young man came out today of HP and replaced, the USB port and the Board at the back of the machine, we have proven that the cable was still very good.  BUT it (I was certainly not int eh room right here) was able to break a little different - so that the ordered summer and he will return to replace the fuser unit tomorrow.

  HP were super helpful and REALLY happy with the printer was still under warranty.

  Thank you for your help chaps.

• Epson stylus photo rx700 scanner suddenly not recognized as on the what it is.

  Hi, I used the all scanner part in one printer on August 13, 2013 with epson scan program. Everything has worked perfectly as usual.
  The next morning, I tried to scan a document and got a message saying scanner not available.
  I tried all the troubleshooters, but which did not help. I downloaded and installed the latest programs and drivers from epson usa. (Epson uk is convinced the printer no longer exists, but they still sell cartridges for it.) the scanner was still reported as only unavailable. When I double click on the printer in devices and printers, and then select scan a document this message to the top pos ' operation could not be completed error 0 x 00000015 device is not ready ".

  Finally I tried on my linux OS and the printer and the scanner works properly.

  I also tried on my Windows7 laptop with the same results as my main PC Windows7.

  I have not installed all the programs etc. Since the last scanner was working.

  I don't know if it's relevant or not, but at the same time, I noticed that Web links of emails or my office and dialogs in browsers no longer work. Some I have no message, they work not and a few others, I'm getting "problem with shortcut. Unable to open this Internet shortcut. The Protocol "http" does not have a registered program"this happens also on the laptop.

  I have ladies of viruses and malware on computers as well as firewalls. I also did a full scan at the same time and both reports were clean.

  Thank you

  Hi Frederic,.

  I suggest you try the solutions provided by Meghmala in the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/operation-could-not-be-completed-error-0x00000015/68244f52-B556-4b83-a9c9-926dc9098ae7

  It will be useful.

• First Pro CS6 license not recognized - "serial number provided is valid, but calling it a product was not found on this computer."

  I have a new computer and tried to get the first Pro CS6 installed. I have a license first Pro "Version 6"Windows - I can see in MY PRODUCTS. So downloaded installation for first Pro CS6 "old downloads" page - when I put in the serial number, it says ' serial number provided is valid, but calling it a product was not found on this computer. "there is a"select a product"drop down and the only thing on the list is Pro Prem CS5.5 - when I put in the liscence here It says invalid. Just to try, I downloaded the installation for CS5.5 and who does not accept the license at all. What can I do to get the CS6 running on my new computer?

  A bit of history which could be related, I remember that I originally bought first Pro CS5 from someone on ebay, not knowing that it was a Mac version, which would not work on my PC - so I contacted Adobe and upgraded to CS6 for Windows at a lower cost. I see in MY PRODUCTS there is a serial number for the two "Adobe Premier Pro" version 5 for MAC and Version 6 for Windows.

  Help is appreciated!

  Mike

  It asks you to select a product, qualifying, which is that you have you upgraded

  IF you do not have a serial number for a product that you upgraded by using the same platform, please contact our support staff.

  To contact support for a serial number or activation number, please click on the link below:

  (be sure to connect to adobe.com with your Adobe ID first)

  Serial number and activation support

  Guinot