Join a new MD1000 to an MD3000 existing query

I'm as confused as if I connect our new MD1000 to our exisiting MD3000 in unified mode or in shared mode. Our existing MD3000 has 2 controllers host at the back of the it. Our new MD1000 has a primary EMM and a secondary EMM. What I can do I connect the MD3000 the MD1000 in shared Mode by running a cable from the "in" on the primary EMM in the MD1000 to the available port in the first controller on the MD3000 host (slot 0) then by running a second cable from the 'in' on the secondary EMM in the MD1000 to the available port on the second controller on the MD3000 host (slot 1).

Can you confirm that the above is what I have to do?

Also looking at the requirements for adding the MD1000 it is mentioned that I need to have the following:

"Developing an existing Md3000 with a new Md1000 chassis system".
Follow these steps to fix a new MD1000 to an MD3000 existing extension
attachment.
NOTICE: The mode dial must be in the position of the mode "Uni" for the MD1000 chassis to function
with the MD3000 chassis.
1 on the MD3000 chassis, upgrade the controller to A01 or later software.
2 on the host servers and the MD3000 system, follow these steps (in order) to upgrade
components:
an upgrade of the SAS 5/E driver and firmware. For Windows hosts, use the update package.
For Linux hosts, use the DKMS package.
b upgrade the Modular Disk Storage Manager on each host server. (The latest version is available
from the support.dell.com site.) Refer to the Installation Guide of PowerVault MD3000 for further
information.
c upgrade pilots multichannel on each host server. Paths multiple drivers are provided with the
Modular disk (MD) Storage Manager installation package.
On Windows hosts, the drivers are installed automatically when you install MD Storage Manager
in Full mode or host. On Linux hosts, you must install Multipath drivers manually.
NOTICE: If you are prompted, restart the host servers during the upgrade process.
3 once all components have been upgraded, to stop one or more hosts, then shut down the MD3000
attachment.
4 attach the MD1000 expansion on the MD3000 chassis, following the steps in the
Dell PowerVault Compatibility Matrix (available from support.dell.com site). »

Is there documentation that explains how to perform updates to the firmware on the MD3000 and the MD1000? Thank you.

Doug

The minimum to connect to a MD3000 is A03 and A04 later and came out for about 3 years now, so if you bought your speaker this year, it came with A04 already and the MD1000 itself should not need upgrades (drives in the MD1000 is another story, but you can not determine their firmware until you connect it to the MD3000).

Tags: Dell Products

Similar Questions

  • Boot Camp said "we couldn't create a new partition or locate an existing one.

    I am trying to install Windows using Boot Camp 8.1, after having previously deleted my partition Windows 10 after getting into a loop Auto Repair. I get the following error after hitting the button "format" on the installation of Windows: "we could not create a new partition to locate an existing one. For more information, see the Setup logs files. »

    Look at the other pages, I'm noting I have seem to have more than the other disk partitions (although the disk utility says I have no partitioned disks). In the Windows Setup screen, the following things are displayed:

    Disk 0 Partition 3 primary MB 128.0 MB 0.0

    Drive system 1 Partition 1:EFI 200.0 MB 196,0 MB

    Disc 2 GB 412,1, 0.0 MB primary Partition 1

    Disc 1 3 MB 619,0 0.0 MB primary Partition

    Disc 1 4:BOOTCAMP 518,6 GB GB 518,5 Primary Partition

    Why it seems that I have so many partitions? Shows only utility, I have one disk (more Boot Camp one). This is let me install Windows 8.1? I used BootCamp when my computer is new, 2 years ago and had no problem at all. And I added some partitions since (to my knowledge).

    Any help would be greatly appreciated!

    What are drives 0 and 1? You have a Fusion drive?

  • YOU UNLOCK THE IPHONE WHENEVER YOU JOIN A NEW NETWORK

    YOU UNLOCK THE IPHONE WHENEVER YOU JOIN A NEW NETWORK.

    Hi jonfromharrow,

    Thank you for contributing to the communities of Apple Support.

    You're asking about unlocking your iPhone then it can be used with other carriers (cellular)?

    If so, your original carrier has unlock the device before it can be used with other networks. How to unlock your iPhone for use with another carrier has detailed information about the process.

    If you need unlock the lock screen before joining wireless networks, try setting the password / settings Touch ID -use a password with your iPhone, iPad or iPod touch.

    All the best.

  • HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

    System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

    Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

    appears in the new installation of Windows 8.0.

    Installation of MS Windows 8 DVD detects the hard drive OK.

    Software mini of Partition of the tool (3rd part) detects the hard drive OK.

    Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

    Here are the steps that I tried to solve the problem, but it won't work.

    1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

    2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

    3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

    4 MiniTool Partition software used to clean HD and partition... always get the same error message.

    5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

    Background

    I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

    After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

    There is no SIM card in the laptop.

    Help, please...

    I managed to do work Ok. Use Windows 8 DVD to run Diskpart

    1 delete the partition.

    2. restart the system.

    3. allow Windows 8 DVD to perform the partition and format the HD.

  • I'm new to hotmail. My existing e-mail account has more than 300 contacts. When I tried to import the same in my hotmail account, he indicated that address book is full.

    original title: TROUBLE in OTHER email ACCOUNT CONTACTS IMPORT

    I'm new to hotmail. My existing e-mail account has more than 300 contacts. When I tried to import the same in my hotmail account, he indicated that address book is full. Please delete some contacts. Checking my new account, I found that 100 contacts have been imported in my address book. (A created csv file export my addresses in outlook.) I need all the contacts in my existing account. What should I do?

    Kind regards.

    Avinash Gupta

    Hello

    The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=1

  • Installation of Hyper-V T420 2012: "we could not create a new partition or locate an existing one.

    Try to install Hyper-V (hypervisor bare metal, not a role) on T420 with PERC H710, receive an error message:

    "We could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

    (Don't even have the slightest idea where search "Files Setup logs" - do not think that the Setup program has a place for them to write).

    What I'm doing wrong here?

    The waiter came with a RAID1 mirror previously partitioned on H710 (the rest of the readers - still not configured); Double SD cards with the hypervisor, VMWare (to be erased or left alone).

    Thanks in advance for any ideas.

    After you disable the internal SD card slot, the installation ends without incident.

  • Could not create a new partition or locate an existing journal of one.see configuration file

    Separated from this thread.

    I get the same error 'could not create a new partition or locate an existing configuration one.see file log', but I install windows server 2012 R2, datacenter edition. I tried the steps above and it has not changed anything. Help please!

    Salvation of demonstration,

    We have a dedicated team working on Windows Server 2012. I suggest you ask your question in the below link:

    https://social.technet.Microsoft.com/forums/en-us/home

    Hope this information is useful.

    Thank you.

  • I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the dr

    I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the drive again - the latest version (DC) it happened again.  How can I fix it?  I am on Windows 7

    Hi donaldm78047015,

    Try the solution mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

    Kind regards

    Nicos

  • Can't see vmdk file when you add a new hard drive to an existing vm

    I'm trying to attach a vmdk file that was recovered from a backup as a new hard drive to an existing test VM (version of the vsphere 4.0 client). I was able to successfully download the file in the data store but it is not available to select when I try to add a hard drive, on an existing virtual machine. The vmdk file has been recovered from a backup server no idea why I can't see it would be very appreciated

    Something does not fit here.

    Since the file names "...-0000003..." this seems to be a delta (snapshot) rather than a virtual disk of dish (base)! Thanks for posting (tie) the hard header file to see how it looks like and to know what lack us.

    André

  • When you create a new site to replace your existing it publish you it to a new or existing site?

    When you create a new site to replace your existing it publish you it to a new or existing site?

    To replace or update an existing site, you must select the same site when downloading.

    If you create the new site then it will not replace the existing but would create a new site itself.

    Thank you

    Sanjit

  • join a new existing email

    I created a new message so I could join an email I had already received. I'm not finding such a function in the logic (for me anyway) of places to check: join tools command, right-click on existing position to attach to new mail from command. Thank you.

    You're falling on the address box? Have you tried this with any regular file to your file system? It's drag-and - déposer who fails, or is it just at the moment where the target is an e-mail message?

    Another approach: open the offending message, save it as an .eml file.

    Join the .eml file to your new message using one of the methods available, such as the file. Attach procedure.

  • New effect SATF filesystem on existing external drives

    Hi all. Maybe a stupid question, but here goes. When Apple moves system files HFS + to SATF, my existing external drives will need to be reformatted? Should I do something to make them work with the new system? Thanks in advance.

    Initially it should not affect anything.  OS X already knows how to access several different file system formats at the same time, so HFS + existing volume is expected to continue its work.

    EA also this article <iled-at-wwdc-to-replace-hfs-in-2017 http://appleinsider.com/articles/16/06/23/inside-apfs-new-apple-file-system-deta>

  • New iPhone synchronize with the existing iTunes account?

    I just bought a new iPhone 6 and they (Verizon) took all the Info off my current iPhone 5 and added to the new phone, contacts, calendar, e-mail...

    I synced my iPhone per day for iTunes using Outlook for calendar and Contacts.

    I made from my old phone to iTunes Cloud backup before you perform the switch but normally sync locally to my PC.

    Now, I want to synchronize my iPhone 6s with existing iTunes account.

    All I have to do differently or just sync as usual.

    Your PC will detect that this iPhone is 'new' and your phone will ask if trust you him.

    After that, restore from a previous backup should work without problem. It will replace all current data on your phone... i.e.: new photos, etc.

    You can use the backup to iCloud as well, but it's requires firstly, erase your phone and use the internet to get your data back. Usually much slower.

  • Can I join a new EO email Outlook Express email?

    Can I join an OE email to a new email to EO?

    Can I join an OE email to a new email to EO?

    In addition, the other great ways to do this, you can also "copy / paste" original mail of new messages.

  • New add scanned pages of existing PDF document

    How can we add new pages scanned to the PDF with HP Photosmart 5520?

    Hi PlaneteDigitale,

    Yes, I misunderstood, my apologies. The answer to your request is not. There is no way to add pages to an existing one all ready saved PDF file. They think only I can suggest is to print existing pages and perform a new analysis all the pages together.

    I know that's not ideal, but it's the only solution I can think of to get all pages in a single file.

Maybe you are looking for