Join a screenshot images

Similar Questions

• How can I get my screenshot image in Paint with Win7?

  I have Window 7 Home Premium with Service Pack 1.  When I use "print screen" and then open Paint, paste option is grayed out.

  The 'Paste From' option is available, but I don't know where to look for the image that I caught.  The option paste to open in my library > photos.

  Thanks for the help; It's very frustrating.

  Thought by using the Snipping Tool?

• How can I change screenshot image resolution?

  If I want to take the image on the screen in Encore CS5 and save it as a photoshop image resolution is 70 DPI.  Is it possible to change the resolution?  I would like images plus net if possible, 100 DPI to 200 DPI if possible.

  Yet CS5

  Processor 2.4 ghz Core 4

  6 GB of Ram

  700 GB of free hard disk

  Windows 7 64 bit

  except why photoshop would still show as 72 pixels/inch and Womble as 100 pixels/inch, shouldn't they show the same thing?

  If you look back to the top the dimensional differences between the images of these two programs, you will see the difference. Do not have these exact dimensions at hand. If you change the size of the Image of the PrPro version to 100 PPI, with her resample UNCHECKED, the inches x inches dimensions should be very, very close. In addition, in the press, the difference between a 72 vs 100 PPI, although inches x inches dimensions were identical, would be almost impossible to see.

  Good luck and we hope this helps,

  Hunt

• Black screenshot image

  I plugged a USB stick for labview using the IMAQdx. Initially, he would go, but would produce errors of time-out after 5 pictures. Now, I managed to get the cycle to run 50 times, but the picture only comes out as a black screen. What could be causing this and how can I fix?

  I think his problem is resolved in this post:

  http://forums.NI.com/T5/LabVIEW/IMAQdx-timeout/m-p/2823844#M826279

  Guess there is no problem with his camera connectivity. I would ask you to mark it as solved if your problem is solved F.N.

• Forum: Camera icon to display a screenshot image

  Is grayed out

  For me too, and apparently others too. I sent a message to the administration of the forum on how to change this.

• Attack is different between the view and the browser preview of the design?

  I'm a long-time user of Dreamweaver, but I'm new to Adobe Muse. (I'm eager to learn, especially for its capability of Parallax scrolling). I ran into a problem now, however. It seems that the main in an unordered list (UL) don't shows not the same between design mode and Adobe Muse when you preview in Google Chrome. I'll try to join two screenshot images to illustrate.

  

  The image on the left is taken from a way of creation of Muse (you can even see one of the directions in there.) The right image is the same area of Chrome. It is a pretty big difference.

  The unordered list has a specific paragraph Style and the header above it uses a different paragraph Style, as well as a character Style so that it uses one different font and other. However, all of the text in the box uses a value of 120% for the leader. What gives?

  In addition, for reference, the fonts I use are two Adobe Edge Web fonts provided within the Muse: League Gothic and regular Ubuntu.

  Hit it. It turns out that the problem is not the main, but rather the 'space before' and 'Space after' being calculated differently between the Design view and in Chrome. I was able to 'fix' by adjusting these two values. It is not very difficult, because there is still a chance that a line of text may wrap when I don't want that, or vice versa, but he should be fine for now.

• How to increase the image quality screenshot in the output of the PSR utility file.

  Former title: improve the quality of the Screen Shots when using ESP

  Is there a way to improve the quality (sharpness/readability) of the results

  of the routine use of the psr.  The quality of the text looks faded even on my

  monitor and also when printing.  Icons also appear dimmed and lack of sharpness.

  I realize that the screenshots can be 'zoomed' on, but does not

  a lot of help.

  Thank you

  k e n

  Hello Ann,.

  Welcome to Forums Community Microsoft and we are happy to know that you have chosen Windows 8.

  According to the description of your question, the texts on the screenshot of the images in the output file of the problem step recorder (PSR) utility appears to be faded and are not very clear on the computer screen and as well as when they are printed.

  This happens because the screenshot images are small in size when they are incorporated into the PSR output file. However, these screenshot images become larger size, when you click on it and you'll be able to read all the texts in the screenshot image. You can click on images to its original size. When all images find its original size, try printing it and check if you are able to get a clear printed to have images of screenshot with a readable text.

  Note: once you close the output file and re - open again, the screenshot images are once converted to get its original size and smaller images, you may need to click the pictures again.

  Hope this information is useful. In the future, if you have any questions or problems related to Windows, you can feel free to post on the Community Forums of Microsoft and we will be happy to help you.

• Download problems image cable Canon camera

  I have a brand new computer laptop Mac Book Pro with OS El Capitan, and I am trying to download my pictures from my compact camera Gx1 to the laptop via the camera download cable. Of course I've already installed the Canon Canon Utilities Window /Camera of its CD image software (has been attached to the camera when it was purchased). (The Canon EOS Utility software, which I also installed it, is exclusively for my Canon EOS camera models). However, the download of the image does not work either.

  Images are downloaded into the folder Mac (program?) "Bilder" (*) (Images (?) in the version of Mac OS English?) where I certainly don't want to, I want to download my images in my own folder structure that distinguishes for example camera model/date photo taken/RAW files or jpeg etc. The folder Mac (program?) "Bilder" (Images (?) in the version of Mac OS English?) may be authorized to store the images simple iPhone 6s I take, but certainly not Raw files of my actual cameras!

  (*) "Bilder" (Images (?) a multicolored a little icon circle in the operating system Mac - Mac (program?) file

  The thing very strange, as the first two weeks of use my brand new computer computer laptop Mac Book Pro, the image download to the Mac via the cable from my camera Canon G1x worked as planned, but AFTER I once (the first time ever to purchase date computer I tried to upload pictures to my iPhone 6 s new Mac) I downloaded images to the Mac from my iPhone 6 s via the cable of the iPhone, the camera G1x download system image failed. I seems as if my download of images from the iPhone 6 s "Insider" start-up of the Mac OS (program) folder

  the 'Pictures' folder (Images (?) in English Mac OS version?) and the laptop Mac assumes that I want to download all the images, as for example my G1x camera RAW files in the 'Pictures' folder (Images (?) in the version of Mac OS English?).. . DEFINITELY NOT!

  I am terribly frustrated now and do not feel the I get any understanding or assistance from Apple support.

  This description of the problem will also be sent to the camera of Canon Inc., informing them of my issues with Mac OS El Capitan.

  Someone experienced with Mac, a friend of mine, said that "as usual, Apple"cache"the images and makes them normally inaccessible in the Finder. If you want to work wth them in another program (also), you must export the images of "Bilder" * (Images ()) - not at all practical, which means that two copies of images.

  Joined 9 screenshots - .png and .jpg files (. png files show how Mac views are displayed, show the .jpg files "how it should be regarded with correct download cables", the screenshots of the interface come however from a laptop with XP Home, not Mac OS operating system.

  The first two weeks of work with my Mac, the 'Download desired cable interfaces"WERE EVEN in what concerns the PC referred to above.

  

  Hi CanalogSE,

  Welcome to the communities of Apple Support! I'm sorry to hear you're having problems with your new Mac. You're talking about the 'Bilder' application seems to be the new application Photos, replacement of preparations on the previous iPhotos. If you wish, you can read more about it here:

  Apple OS X - pictures.

  Start with Photos for OS X - Apple support

  From your description, it seems that if you have connected your iPhone to import your photos, she may have inadvertently changed the overall picture import settings by launching Photos for the first time (since importing default photos for devices iOS in El Capitan's Photos). If you want to change the application for importing photos by default for when you connect your Canon Gx1 (for example, for the Canon software), you should be able to get rid of it in another application called Image Capture; I'm not clear what would be the name translated, but it should have this icon:

  Image Capture help

  In the Image Capture with your camera connected, you should see an option in the lower left corner to opens the connection this [device]: which will allow you to select your preferred; application If you don't see this, you may need to click on the the icon to display these options.

  Concerning

• Image rotation

  As you said in link below to join the screenshots of my new questions. Please find below the screenshots

  Link: http://supportforums.blackberry.com/t5/Java-Development/Image-rotation-with-angle-in-Blackberry/m-p/...

  Screenshots:

  

  Image rotation based on the angle that am passing. But then the image of the rotation is narrowing: height and width resizes. It does not seek beautiful image. Please help me.

  Please mark this as resolved issue.

• Where can I find as the screenshot I captured of a pop-up that is causing problems with Internet Explorer?

  I took a screen shot of a pop-up, so I me advise about this pop up, but now I can find it. Where can I find the screenshot? I looked in my documents as well as photos, but he isn't here? I need to find the screen shot to get help with it because I had big problems with Internet explore all day today and this pop-up started yesterday.

  Thanks for any help I can get.

  Linda

  Original title: screenshot

  I took a screen shot of a pop-up, so I me advise about this pop up, but now I can find it. Where can I find the screenshot? I looked in my documents as well as photos, but he isn't here? I need to find the screen shot to get help with it because I had big problems with Internet explore all day today and this pop-up started yesterday.

  Thanks for any help I can get.

  Linda

  Hi Linda

  Take a screenshot in Windows 7 requires several actions.

  1. press the Printscreen key. This operation copies an image of the screen to the Clipboard.

  2. open an imaging program such as MS Paint and paste the screenshot.

  3 save the screenshot image in a folder of your choice.

  Concerning

• Screenshot method

  Hi all

  I use the following code to capture screen:

  Bitmap image = new Bitmap( 64, 64 );                             Display.screenshot( image, 0, 0, 64, 64 );
  

  I then use:

  image.getType () which returns 197: ROWWISE_16BIT_COLOR

  But if I had to use

  Bitmap image = new Bitmap( 64, 64, Bitmap.ROWWISE_16BIT_COLOR );Display.screenshot( image, 0, 0, 64, 64 );
  

  He throws an IllegalArgumentException saying that is not supported

  Can someone explain this?

  Certainly if the created image is going to be a ROWWISE_16BIT_COLOR, then you can create a bitmap image in ROWWISE_16BIT_COLOR for the screenshot to use?

  According to the documents of the developer, the first parameter is the type where you should type and not in the last...

  Bitmap(int type, int width, int height)
  

  Given that the first parameter is 64, it shows that there is an illegal argument...

  See you soon...

• screen shot image blurred/distorted when inserted in captivate 7

  I'm trying to insert a screenshot image into a page of quiz of hotspot on my site my users access - when inserted or pasted, the text in the image distorts so that you can't read.  I tried many things to fix it and nothing works.  I tried to save as a .gif, .png, .png24 .jpeg, tried to change the resolution.  I've never had this problem before.

  Any ideas would be great.

  Thank you!

  What is the zoom for Captivate setting? Maybe it's something other than 100%?

• MUSE - bearings change the background image

  I want to create button 4 (thumbnails) which, when you flipping them, changes the page's background image (background images are different for thumbnails). And when you rollover a different thumbnail, background image fades into a different image (again, it is different thumbnail).

  Does anyone know how to get there? At the end of the day, I join the background image to scroll to a different pace for thumbnails.

  You can use compositions for this where the triggers can be equipped with image for different States and target container should be large enough to cover the area of the page, so that when the tile is flat so this specific target will appear page so substantive change.

  Thank you

  Sanjit

• Link existing cloning of connection pool to your fresh parent image

  I use VM View 4.6 and my VM's every Windows 7 dedicated with persistent records.

  I need assistance with clone of connection pools.

  I tried to patch and re - compose one of my stocks, unfortunately the master image had not been lit for a long time and when I turned on it has been rejected by AD. This turns out to be due to the length of the virtual machine has been powered down (expired password) coupled with a demotion of the domain controller that the image of the master had contacted last. All VM related work normally. Under normal circumstances, join a physical PC to the domain would solve the problem, so no other choice I decided to go ahead and disconnect the main image of AD and he returned then. I have patched then the VM image parent took a fresh snapshot and then tried to recompose the pool. Unfortunately, the re-composer fails, other groups may be re-compounds.

  Could someone please help with?

  • Join the main image to AD would have this adverse effect?
    
  • Can I create a new image of master and reconstruct the existing VM from this pool, to link to the new image?
    
  • What other options, if any do I need to rescue about 100 of these bound VM?
    

  I've seen something like this before.   The end result is that there are two accounts of vCenter in the View Composer database and pools that do not work are somehow related to the older account.    I can give you a high-level overview of how it was fixed, or if you have VMware support I can give you the SR number so that you can open a ticket and references.

• Place pictures (screenshots) to legends - best practices?

  Illustrator CS6, Windows 7

  I am placing screenshots (screenshots of the software) in the files of my work to add captions and create illustrations for a user manual.

  The machine I'm capture has a screen resolution at 1920 x 1080 (required for software). I am using Snagit and capture screens, saving files, then place in Illustrator. I am using minimum 300 dpi and never upsizing images in Illustrator. I still think that my results could not be better.

  In the past, I used .jpg as my export filetype for placement in Illustrator. But these recent readings of messages in this community lead me to believe that my practice might be defective.

  Question: What is considered best practice to place the screenshot images (or any source) in Illustrator? What kind of capture file will get the results of the lighter and more adaptable?

  My color mode of Illustrator file is CMYK and my other art and legends supporting the perforated Cap work very well.

  I am creating the work for import into Framemaker and create a PDF file for print and online.

  I want to say is; What is the user looking at, and what you are training on?

  For example, if the application includes part of your documents and medical imaging covers something like the assessment of medical images in the application, it would probably be a scenario much more color-critical application in which the user just displays and manipulates the data.

  Generally, you don't need something like 300 PPI for screen captures in documentation of the software. The whole intention is to the image of resemble the screen you document, which is something like 72 or 96 DPI at full size. You can reduce a screenshot as much less 50%, but at this size, the drive shows the text of the application (including the menus, etc.) to half of such size as displayed in the app, which is supposed to be sized for comfortable reading. The sharpness is good. You don't want the images to fade in the pursuit of pointless "resolution."

  Also in General, screenshots of the software are not usually colour-critical. Implementation (same sticky of SnagIt) directly in the page layout application is usually very good. PostScript knows how to separate RGB images. These things have been done for a long time before anyone who sweated blood on "color management." Assuming that the interface of your application uses Garish colors (which would be the poor interface design; it's tiring), I dare say that the conversion of RGB to CMYK screenshots to the imagesetter or press would be nice.

  How to print manual? Unless you're talking about a large prints of the press, today the software (subject to frequent updates) documentation is often printed on presses on demand (think glorified digital color, photocopiers) presses not leaves. With the documentation of the software, you're talking about aren't usually the collection of coffee table books. (The exception would be something like a book on the color in Photoshop correction; so my first question.)

  I always paste screenshots of SnagIt directly into InDesign pages to document software applications and add captions in InDesign. Only when I need some special graphics (plunging arrows, etc.) Assemble the captions for the screenshots in Illustrator; and even when I do that I have usually also paste the SnagIt capture directly to HAVE.

  Keep your native legends for better page layout program facilitates language translation, when you need to outsource that.

  JET