JPS-01520 - cannot initialize the identity store, cause: unable to connect to the directory. Check configuration information...

WebCenter content 11.1.1.8.7 has been installed on a single node and configured by using the security provider of external JPS using OID 11.1.1.7

JPS_store_config.png

WebCenter content area uses OAM 11 GR 2 as a single sign on the mechanics and the DIO as authentication providers

Auth_providers.png

OID contains all users belonging to a group and can be viewed correctly using DOHAD.

ODSm_userBrowse.png

A few days ago the users connected to the webcenter content was not asigned no role.

WebCenter star in the field of content very well, Admin Server and store of JPS is initialized correctly, users and members of the group can be seen in areas of security-> users and groups to the weblogic console window.

weblogic_usersandgroups.png

However, when starting a webcenter content managed server, the following message appears:

<JPS-01520> <Cannot initialize identity store, cause: Failed to connect to directory. Check configuration information..> 

And users get only the default authenticated roles.

weblogic_ecm-UserRoles.png

Where he should have been granted the role administrators ECM, sysadmin and admin role, because of the map of credentials configured in webcenter content server

Content_credentialmap.png

In the providers section, JpsUserProvider is down

Content_jpsproviderdown.png

and using the test function, the following error displays to webcenter content records:

<Oct 23, 2015 11:48:41 AM COT> <Error> <oracle.ucm.idccs> <UCM-CS-000001> <general exception> 
<Oct 23, 2015 11:48:41 AM COT> <Error> <oracle.ucm.idccs> <UCM-CS-000001> <general exception
intradoc.common.ServiceException: !csJpsIdentityStoreNotConfigured
        at idc.provider.jps.JpsUserProvider.testConnection(JpsUserProvider.java:941)
        at intradoc.server.proxy.ProviderStateUtils.testConnection(ProviderStateUtils.java:66)
        at intradoc.server.ProviderManagerService.testProvider(ProviderManagerService.java:128)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
        at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)
        at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)
        at intradoc.server.Service.doCodeEx(Service.java:640)
        at intradoc.server.Service.doCode(Service.java:595)
        at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1693)
        at intradoc.server.Service.doAction(Service.java:566)
        at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1483)
        at intradoc.server.Service.doActions(Service.java:562)
        at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1415)
        at intradoc.server.Service.executeActions(Service.java:547)
        at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:751)
        at intradoc.server.Service.doRequest(Service.java:1976)
        at intradoc.server.ServiceManager.processCommand(ServiceManager.java:487)
        at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
        at intradoc.idcwls.IdcServletRequestUtils.doRequest(IdcServletRequestUtils.java:1358)
        at intradoc.idcwls.IdcServletRequestUtils.processFilterEvent(IdcServletRequestUtils.java:1732)
        at intradoc.idcwls.IdcIntegrateWrapper.processFilterEvent(IdcIntegrateWrapper.java:223)
        at sun.reflect.GeneratedMethodAccessor219.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)
        at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
        at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
        at idcservlet.ServletUtils.executeContentServerIntegrateMethodOnConfig(ServletUtils.java:1680)
        at idcservlet.IdcFilter.doFilter(IdcFilter.java:457)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:419)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3748)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3714)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2283)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2182)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1495)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

This behavior also affects SOA managed server and managed servers of the WebCenter Portal

The servers were turned on in the right order, the first Management Server, then content managed server

Is there a way to diagnose the reason why JPS security provider cannot be initialized?

The problem seems to play with communication with the DNS server, which makes it a delay on the resolution for entry to the OID server host name, this could be verified using traceroute and ping commands.

This delay caused the connection failure to the OID server during initialization of JPS.

As a solution, fully qualified for OID server host name has been configured manually to the file/etc/hosts. After this change, JPS can be initialized correctly.

Howerver, that the log shows no time-out or any other exception during the initialziation, making diagnosis difficult to obtain.

Thanks for your help.

Tags: Fusion Middleware

Similar Questions

  • WebCenter spaces managed server error: JPS-01520: cannot initialize the identity store, cause: oracle.security.idm.ConfigurationException: unable to connect to the directory. Check configuration information...

    WebCenter Portal 11.1.1.9.2 has been installed on a single node and configured using external policy based JPS Sotre 11.1.1.7 OID LDAP and Oracle Access Manager 11.1.2.2.0 for Single Sign-On.

    For WebCenter Portal managed starting the server (and all the other managed servers, Portlet, Collaboration, utilities, etc.) the following error message is recorded in the log files:

    <Oct 26, 2015 10:35:32 AM COT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..> 
    <Oct 26, 2015 10:35:32 AM COT> <Error> <oracle.adf.mbean.share.connection.ConnectionsHelper> <BEA-000000> <Failed to get credentials for alias ADF and connection name PageletConnection
    java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..
      at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:386)
      at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:363)
      at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:272)
      at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:233)
      at oracle.adf.share.security.providers.jps.CSFCredentialStore.getCurrentUserUniqueID(CSFCredentialStore.java:1253)
      at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:489)
      at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:653)
      at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
      at oracle.adf.mbean.share.connection.ConnectionsHelper.getCredentials(ConnectionsHelper.java:208)
      at oracle.adf.mbean.share.connection.ReferenceHelper.getCredentials(ReferenceHelper.java:334)
      at oracle.adf.mbean.share.connection.ReferenceHelper.createReference(ReferenceHelper.java:299)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.registerBean(ConnectionsRuntimeMXBeanImpl.java:499)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.createConnection(ConnectionsRuntimeMXBeanImpl.java:577)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.configObjectReloaded(ConnectionsRuntimeMXBeanImpl.java:778)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.postRegister(ConnectionsRuntimeMXBeanImpl.java:1089)
      at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doPostRegister(OracleStandardEmitterMBean.java:556)
      at oracle.adf.mbean.share.AdfMBeanInterceptor.internalPostRegister(AdfMBeanInterceptor.java:223)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.security.jps.ee.jmx.JpsJmxInterceptor$4.run(JpsJmxInterceptor.java:605)
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
      at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPostRegister(JpsJmxInterceptor.java:622)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
      at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPostRegister(ContextClassLoaderMBeanInterceptor.java:167)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.postRegister(OracleStandardEmitterMBean.java:521)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.postRegister(DefaultMBeanServerInterceptor.java:1024)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:974)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
      at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
      at java.security.AccessController.doPrivileged(Native Method)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
      at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
      at java.security.AccessController.doPrivileged(Native Method)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
      at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
      at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
      at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:111)
      at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1527)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:187)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:379)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused By: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520: Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: Failed to connect to directory. Check configuration information..
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:381)
      at oracle.adf.share.security.providers.jps.JpsUtil.getDefaultIdentityStore(JpsUtil.java:363)
      at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:272)
      at oracle.adf.share.security.providers.jps.JpsUtil.getUserUniqueIdentifier(JpsUtil.java:233)
      at oracle.adf.share.security.providers.jps.CSFCredentialStore.getCurrentUserUniqueID(CSFCredentialStore.java:1253)
      at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:489)
      at oracle.adf.share.security.providers.jps.CSFCredentialStore.fetchCredential(CSFCredentialStore.java:653)
      at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
      at oracle.adf.mbean.share.connection.ConnectionsHelper.getCredentials(ConnectionsHelper.java:208)
      at oracle.adf.mbean.share.connection.ReferenceHelper.getCredentials(ReferenceHelper.java:334)
      at oracle.adf.mbean.share.connection.ReferenceHelper.createReference(ReferenceHelper.java:299)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.registerBean(ConnectionsRuntimeMXBeanImpl.java:499)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.createConnection(ConnectionsRuntimeMXBeanImpl.java:577)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.configObjectReloaded(ConnectionsRuntimeMXBeanImpl.java:778)
      at oracle.adf.mbean.share.connection.ConnectionsRuntimeMXBeanImpl.postRegister(ConnectionsRuntimeMXBeanImpl.java:1089)
      at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doPostRegister(OracleStandardEmitterMBean.java:556)
      at oracle.adf.mbean.share.AdfMBeanInterceptor.internalPostRegister(AdfMBeanInterceptor.java:223)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.security.jps.ee.jmx.JpsJmxInterceptor$4.run(JpsJmxInterceptor.java:605)
      at java.security.AccessController.doPrivileged(Native Method)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:464)
      at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPostRegister(JpsJmxInterceptor.java:622)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
      at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPostRegister(ContextClassLoaderMBeanInterceptor.java:167)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPostRegister(DefaultMBeanInterceptor.java:87)
      at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPostRegister(AbstractMBeanInterceptor.java:204)
      at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.postRegister(OracleStandardEmitterMBean.java:521)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.postRegister(DefaultMBeanServerInterceptor.java:1024)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:974)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:900)
      at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:324)
      at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:522)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
      at java.security.AccessController.doPrivileged(Native Method)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
      at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
      at java.security.AccessController.doPrivileged(Native Method)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
      at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
      at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
      at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
      at oracle.adf.mbean.share.connection.ADFConnectionLifeCycleCallBack.contextInitialized(ADFConnectionLifeCycleCallBack.java:111)
      at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
      at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1871)
      at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3173)
      at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1527)
      at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
      at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
      at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
      at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
      at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
      at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
      at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
      at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
      at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:187)
      at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:379)
      at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
      at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
      at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
      at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
      at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
      at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
      at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
      at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
      at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:263)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    

    OID contains all users belonging to a group and can be viewed correctly using DOHAD.

    Users cannot connect to the portal WebCenter or any other application of the field gets initialized because JPS store does not.

    However, the JPS store gets initialized for the administration server, users and group membership can be toured from the areas of security-> users and groups to the weblogic console window.

    A few days ago the users connected to the webcenter content was not asigned no role.

    WebCenter star in the field of content very well, Admin Server and store of JPS is initialized correctly, users and members of the group can be seen in areas of security-> users and groups to the weblogic console window.

    WCP-weblogic_usersandgroups.png

    This error started to appear a few days before, before that, everything was normal, and users could connect to the webcenter portal group for membership and get the OID and the privileges of JPS LDAP store.

    Servers werer started first, using Nodemanager script to start the server administration, and after that the administrator of the booted server, console weblogic was used to start managed servers.

    Is there a way to debug the JPS Store initialization?

    Hello Amey

    The indicator for OAM ID Asserter is required for single sign on functionality, whatever it is, the problem, seems to be communication with the DNS server, which makes a delay that could be verified using traceroute and ping commands.

    This delay caused the connection failure to the OID server during initialization of JPS.

    As a solution, thefully qualified hostname to OID server has been configured manually to the file/etc/hosts. After this change, JPS can be initialized correctly.

    Howerver, that the log shows no time-out or any other exception during the initialziation, making diagnosis difficult to obtain.

    Thanks for your help.

  • During installation, download "error!" Cannot initialize the plug-ins directory.

    Has started having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 update and update AVG virus scan clean, updated MalwareBytes and scan clean. Troubleshooting finally brought me to uninstall and try for a clean install... normal Windows 7 uninstall process successful. Is that Firefox folder in "Program Files" has been deleted. Download "DownloadApp_1_7_5_198_Setup" (29 442 KB) of the Mozilla Web site and run... "error!" Cannot initialize the plug-ins directory. Please try again later. »

    http://www.bleepingcomputer.com/forum.../error-cant-initialize-plug-ins-directory-please-try-again-later/
    What are the permissions on your Temp folder?

    Look to see if there are a few cases on this point, brb.

  • Windows cannot initialize the device of this hardware driver. (Code 37)

    Windows cannot initialize the device of this hardware driver. (Code 37)
    There is no upper or lower filters in reg.
    external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
    How do I solve this problem

    Hello Rajendra Aagarwal,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

    Method 1: Run the Fixit and check

    Hardware devices do not work or are not detected in Windows (Fixit)

    Method 2: Check the steps to get the 37 error code

    Explanation of error codes generated by Device Manager in Windows XP Professional 

    Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

    Good day!

    Hope this information helps.

  • the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

    See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

    Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

  • Why Adobe cannot initialize the program?

    Why Adobe cannot initialize the program?

    Hello

    Please see error: "Setup cannot initialize ' | Windows

    Hope that helps!

    Kind regards

    Sheena

  • KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

    KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

    Hi dakota25,

    ·         Did you do changes on the computer before the show?

    ·         You are able to install other updates successfully?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

  • Code 37 Windows cannot initialize the device of this hardware driver

    I have an emachines desktop computer and the dvd has stopped working. I tried to uninstall & reinstall & reboot but it doesn't seem to help. Any suggestions?

    Hello houghmary,

    Thanks for posting your question on the Microsoft Forums.

    Since the recommended solution is to uninstall and reinstall your drivers and you have already done. We need back up the registry before you proceed to this possible solution.

    Make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/322756/ how to back up and restore the registry in Windows

    You can also create a manual system restore point so that you can restore in case of problems.
    Creating a system manually restore point

    • Right-click on the computer icon in the desktop, then choose Properties
    • In the left pane, click System Protection
    • Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
    • If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    • Click the System Protection tab, and then click create.
    • In the System Protection dialog box, type a description, and then click create.


    Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

    "Run REGEDIT, open the following folders:
    HKEY_LOCAL_MACHINE
    SYSTEM
    CurrentControlSet
    Control
    Class
    {4D36E965-E325-11CE-BFC1-08002BE10318}

    After you click {4D36E965-E325-11CE-BFC1-08002BE10318} you should see two settings on the right side:
    "Upperfilters".
    'Lowerfilters '.

    Click on each of them, press DELETE, and then click YES.

    If please reply back and let us know if these measures have helped to solve your problem with your DVD or if you need further assistance.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot initialize the service of guard dog

    Since doing a reinstall of El Capitan (10.11.5) yesterday on my Imac, I was see the following in the system log every 10 seconds. I didn't know that before the update. I was wondering why this process is necessary and why he's stuck. Anyone else seeing this?

    01/07/16 7:57:37.390 AM watchdogd [9893]: [watchdog_daemon] @(wd_watchdog_open) - IOIteratorNext failed (kr = 0)

    01/07/16 7:57:37.390 AM watchdogd [9893]: [watchdog_daemon] @(wd_daemon_init) - could not open connection with the watchdog of the kernel

    01/07/16 7:57:37.390 AM watchdogd [9893]: [watchdog_daemon] @(main) - failed to initialize the watchdog service

    01/07/16 7:57:37.391 AM com.apple.xpc.launchd [1]: (com.apple.watchdogd) Service worked only for 0 seconds. Push the respawn in 10 seconds.

    01/07/16 7:57:42.517 AM com.apple.xpc.launchd [1]: (com.apple.dpd [9892]) Service came out with abnormal code: 75

    you run OSX server?

    Mac OS X Server: about the monitoring process

    See this post and proceed as you see fit

    http://www.tonymacx86.com/threads/watchdogd-watchdog-service-initialization-ERRO rs.145664.

  • Portege M780 - 10G: Toshiba Wireless Manager cannot initialize the 3G device

    Hello

    by mistake I deleted connections used by the 3G device to connect broadband.

    Now when I run Toshiba Wireless Manager it attempt to initialize the device of wide band 3G but nothing happens.
    The laptop is a Toshiba Portege M780 10 G, 3G is an Ericrsson F3607gw and the operating system is Windows 7 Professional 32 bit.

    I tried to reinstall Toshiba Wireless Manager and the device 3G driver.

    Please, can you tell how to solve my problem?

    Thank you

    To be honest I don t understand how you could remove connections to broadband?
    However, you should check first if the 3G device is recognized in Device Manager correctly.
    If it is not recognized, this would require a 3G driver installation.

    All parts of the software can be found here:
    http://APS.toshiba-tro.de/WLAN/?page=3gdownloads

    Here you will find the description step by step how to set up and establish a 3G connection via the preinstalled Toshiba Wireless Manager?
    http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  • Problems of Battlefield 3 game when connecting to a server: "cannot initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed.

    Im trying to connect to a server on Battlefield 3 as im log on a server I get a message saying: could not initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed. Usually, it is a result of the lack of specific driver of the seller then, how can I fix this problem so that I can play Battlefield 3 new...

    Hi Anthany,

    If you have a hardware device that does not properly with your computer, you probably need a driver updated. There are three ways to update a driver:

    • Use Windows Update. You will have to perhaps set Windows Update automatically download and install recommended updates.

    • Install the software from the manufacturer of the device. For example, if your device is equipped with a disk, this disk can contain software that installs a driver for the device.

    • Download and update the driver yourself. Use this method to install a driver that you download from the manufacturer's website. If Windows Update can't find a driver for your device and the device didn't come with software that installs a driver.

    Step 1: Download and install the latest version of DirectX.

    http://support.Microsoft.com/kb/179113

    Step 2: Download and install the latest graphics driver and see if it works.

    Update a hardware driver that is not working properly(Windows 7)

    Good day!

    Answer please if you face concerns.

  • Cannot complete the disk check

    Hello, please help. I'm not very comp savvy. I run Windows 7 Professional on my computer, I think that it is a 64-bit AMD chipset? My problem is that I have tried everything I can to throw the disc check start ay (NTFS?, so will not work while the drive is in use). I get a message that I have a corrupt firmware and so cannot run diskcheck. Do not know what software it may be and cannot recover until diskcheck is done... Catch 22. I tried the command prompt in elevated mode... .even without help because of NTFS! I am also told by convenience store that my ATI driver is not loaded. Tried using Windows 7 installation disc to repair, but it does not seem to have this facility... I wanted to just re - install Windows. Tried to start my chipset reinstall but was not sure which item to choose. Lost, lost, lost. Help, please?

    First of all, scan SFC. The following link will help you:

    http://support.Microsoft.com/kb/929833/en-us

    Then try running the disk check. If the problem persists, try running Seagate SeaTools from following link to scan the hard drive for errors (also works with hard drives Seagate-no):

    For Windows:

    http://www.Seagate.com/support/downloads/item/SeaTools-win-master/

    For DOS (try it if did not work under Windows):

    http://www.Seagate.com/support/downloads/item/SeaTools-DOS-master/

    You can take a look at the following link on the Seagate SeaTools execution:

    http://knowledge.Seagate.com/articles/en_US/FAQ/202435en?popup=true

  • Cannot set the IMAP mail - configuration cannot be verified

    Hello

    I have trouble to set up my work as an Exchange IMAP messaging in a new installation of Thunderbird. Once I put in the address of the server that Thunderbird retrieved all the security settings, which I checked against the supplied parameters that are listed in the webmail. I've also used these parameters to configure mail IMAP on my phone for triple controls everything. However, in the account configuration screen, I still got the message "Configuration cannot be verified - your name of user and password correct? (again, I checked everything I used independently and they have been accepted). Once I came out of the initial configuration screen error replaced by the following:

    "The GSSAPI/Kerberos ticket is not accepted by the < email address > IMAP server. Please check that you are connected to the Kerberos/GSSAPI Kingdom".

    The only possibility I can think is that Thunderbird tries to use my e-mail instead of the server to authenticate the reason why I'm getting the error. The e-mail address is [email protected] while the server is soliscom.uu.nl.

    Any help or suggestions that anyone has would be welcome,
    See you soon.

    Under Tools/account settings /AccountName/Server Settings, check that you have for the authentication method. "Normal password" is not the most common configuration for secure connections, Kerberos/GSSAPI, which seems to be the reason why you get the error message.

    But if you are sure that the Kerberos/GSSAPI authentication is required, see this article for instructions on how to make the necessary changes in the Config. Publisher:

    https://ITServices.Stanford.edu/service/emailcalendar/email/config/thunderbird_imap_kerb

  • AnyConnect 4.1 - cannot get the secure gateway configuration

    So I AnyConnect working on one SAA however, ASA another located in another country, I get the following error:

    "Unable to get the secure gateway configuration.

    I get a prompt for the username and password seems to be authentication very well however in step 'check' the profile updates this error.

    I was comparing my two setups and they look identical.

    Working ASA model: 5512 worm 9.1 (4)

    Does not not ASA: 5510 worm 9.1 (4)

    Client version: 4.1.02011

    Any ideas?

    Thank you

    Hello, Kevin.

    I know, if there is no customer profile configured on ASA, the software Anyconnect client will use the client profile by default, which is placed on the local computer (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) when installing Anyconnect software.

  • aftermath of the warning: cannot find the directory of user documents

    Anyone else see this warning and what did you find the cause

    After effects WARNING: could not find the directory of user documents.

    I don't know if issue its related to our network systems in the House or an Adobe.  We are running all the current versions of the software Adobe CC.

    Bryan Sliwowski wrote:

    "Has anyone else seen this warning' seems to be a question which can be answered without knowing the system information or technical details.

    In case anyone else has seen this issue, Mylenium request things help us solve your problem anyway. (It is up to you to help Mylenium help because it is one of the most technically savvy here when it comes to AE and its error messages.)

    Are you running AE systems recently upgraded to a new Mac OS? Permission issues could be the cause: permissions problem that prevents fixing start Adobe applications

    Has it worked before? If so, when did it stop working?

    When you say 'Current CC', you can really hear that? A lot of people on these forums who have said, but they were running 12.1 or 12.2 and didn't even not 13.2.0.49 existed because the Creative Cloud software reported their AE as up-to-date.

Maybe you are looking for

  • Emoji updates

    I read on the site of BBC News (UK) this evening that Apple must replace the emoji to gun for a pistol to water and are at present 100 other characters. r-pistol-and-introduces-100-other-charac http://www.BBC.co.UK/Newsbeat/article/36955469/Apple-rep

  • Re: Where is the CMOS battery in Toshiba NB100?

    Hi guys,. I disassembled my nb100 and have been to look at the motherboard for centuries, trying to find the CMOS battery.Basically, my netbook is not in the bios, it is just stuck on the Toshiba start screen.so I thought I would try to remove the cm

  • Satellite L40-17 t Wireless does not! Win 7 32 bit

    Hello, my name is Alex. I have a problem with Toshiba L40 - 17 t wireless driver. So 3 weeks ago I got windows 7, WiFi worked fine, had no problems with it.Recently I reinstalled windows 7, and now my wireless does not work. It is said that no connec

  • Home screen changes randomly sized

    Hello I received my Apple Watch as a Christmas gift and was completely enchanted. Although I like it, I have a niggling problem, and she wondered if anyone else has experienced this? From time to time, at random, the House faced with my zooms just wa

  • Folio 9470 m ultrabook: validity fingerprint (vfs491) sensor stopped working after Windows 7 is 'important' updates

    I was connecting my HP Elitebook Folio 9470 m using the reader of fingerprints without problem since I got it, but this week I made a few updates to Windows 7 (more important only) and now the fingerprint reader is not an option when I start. The pla