JQuery is in conflict with Sharepoint templates locked...

Similar Questions

• HR 11 Version Control with Sharepoint do not restrict access to project; Only access section

  Help please. What I am doing wrong?

  We have RH11 and publish webhelp output. A member of the society gave me permission for a sharepoint site so I could implement version control, but we are having all sorts of problems. I'm not a sharepoint user, so I'm fumbling around in the dark. My experience of HR and Doc-To-Help version control is based on the use of a system that someone else has already created for me.

  I thought it would be easy and sold my team on the idea, but now members of the team are overwhelming each other all the time. We do not seem to lock a project so that no one else can edit/replace. We receive messages on a topic where we do not have permission to work on them, but we want the whole of the project should be blocked. Also, another Member of the team keeps opening files on a SharePoint site instead of from their local disk.

  Where detailed information about best practices for setting up and using the HR with SharePoint version control system? Are there options that I need to turn on or off? Are there options on the Sharepoint side, I should turn on or off? I need hand-holding more that I found - thank you!

  If I understand correctly, you want to lock the whole project and want to avoid overwriting one anothers changes, right?

  To block the project, click 'Check out all' on the Collaboration tab in the Ribbon. This will check out the entire project exclusively for you. So no one can make any changes.

  To overwrite the changes, this probably occurs because the authors exceeded versions on their desktop. The simplest way around this (particularly effective as you will check the entire project) is by definition 2 options:

  1. In the options under Version control, check the option always get the latest version of a project before opening. That way, whenever you open a project, you will always have the latest version and won't overwrite one anothers content.
  2. In options, select "Clear DTCS before opening project" to ensure that you'll nave have old stuff in your local cache.

• Conflict with Superfish menu and WowSlider

  I thought I should start a new thread about this. I bought a license for WowSlider, troubleshooted almost all issues (menu hidden behind the cursor has been resolved by resetting the z-index for the menu at 101, WowSlider is set to 100). However, the questions continue with the menu. I have even the z index-999 and added a bunch more of the values of z-index in different parts of the menu in css.

  I narrowed down it to her being related to have several jquery objects in a page. I have a conflict with the Superfish menu and the WowSlider - on the homepage, where is WowSlider. The forums suggest to insert the noconflict code depending on whether I did but he did the menu fail completely.

  < script type = "text/javascript" >

  jQuery.noConflict ();

  var $j = jQuery;

  < /script >

  I need to do more with this noconflict command but cannot find an example I understand. Your most appreciated expert advice. I hope that I am close to the resolution of the problem.

  Thank you.

  https://micounties.org

  The JQuery forum solution, for those interested. I had to move the section script to the head of Wowslider (of Wowslider) to the top of my list of scripts - I had it below. It worked.

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Firefox is in conflict with pxhlpa64.sys

  (1) installed firefox 25 and auditor of race and got the 1st BSOD pxhlpa64.sys

  (2) installed run fix automatix and fix all clicked again.

  (3) restarted with the Auditor, got the 2nd pxhlpa64.sys BSOD

  (4) automatic fix does not resolve pxhlpa64.sys.

  (5) Firefox uninstalled, run the checker no. BSOD

  100000% sure for my conclusion that firefox is in conflict with pxhlpa64.sys.

  With firefox installed, two of my discs were read and write, but not safe for writing perfect.

  Fix it please I run win7 64 bit, registered.

  http://www.SevenForums.com/BSOD-help-support/295136-BSOD-restart-watching-DVD-incomplete-start-11.html#post2611617

• Satellite R840 - 12 c - conflict with the RFBUS "Bluetooth."

  My Toshiba Satellite R840 - 12 c has a problem with bluetooth.

  On the Device Manager tab, I see a conflict with the RFBUS "Bluetooth."
  So my bluetooth setting does not work... In other words my laptop cannot detect bluetooth despite being bluetooth devices "on"...

  > Tab in Device Manager, I see a conflict with the "Bluetooth RFBUS.
  So uninstall the device first, then download the stack of BT from Toshiba BT portal and after reboot again install this new.
  http://APS2.toshiba-tro.de/Bluetooth/

• Re: Satellite P300 - conflict with the display driver

  Yesterday, I suddenly had a conflict with my display driver. While working on my laptop, a blue screen appeared and then the screen went black and stayed like that. When you use an external monitor, it is possible to start in SafeMode (in normal mode, a blue screen appears). It is possible that a Windows Update has occurred, but I can nog
  cancel anything (no Windows recovery point).

  I uninstalled the display driver and downloaded the latest version, but it doesn't seem to help. Reinstalling Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).

  Does anyone knows how to fix this?

  Kind regards
  Jeroen

  Hey Buddy,

  > Reinstall Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).
  What Windows disk, you used exactly?
  Normally before starting with the installation of Windows, you must format the hard disk and create partitions. If everything is clean at the disk Windows installation starts.

  I advise to use the Toshiba recovery disc. This disk can restore the original settings of the case and before Installation starts the drive HARD to wipe completely.

• El capitan is in conflict with my printer.

  El capitan upgrade is in conflict with my Kodak printer. I would like to delete el capitan from my computer. How can I do?

  El Capitan is the operating system. You can not remove it. The computer would not go.

  What do you mean, exactly, by "competitor" with your printer?

  Barry

• 800 - 030qe envy: conflict with the new video card

  I bought and installed an EVGA GEForce GTX960 graphics card and discovered a conflict with the SATA cable on the motherboard connector. EVGA has recommended that I find a SATA cable with a connector at right angles. Can anyone suggest a source for a suitable cable? Mine is red (?).

  @bobsun2, welcome to the forum.

  This is a cable that should work for you.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Toshiba software conflicts with Microsoft and prevent the wireless connection

  The Toshiba Software on this laptop I have is causing a conflict with Microsoft software and I can't connect wirelessly to an ad - hoc network. Wireless Auto configuration does not automatically start as Toshiba Software is causing a conflict, above, this rolling. If you have also encountered this problem please can you me what you can do to permanently solve this problem? For the moment, I have to go through a process of manually start the Wireless Zero Configuration services and fiddling around with disable and then re-enable wireless network connections if I'm lucky then it finally works, and I have internet! If you are unsure how to permanently solve this problem you know what the telephone support number is for Toshiba UK?

  Thank you very much

  John

  Hello John

  What model of laptop and operating system are you using?
  Do you use the preinstalled original Toshiba OS?

  If you want to talk with Toshiba Toshiba s call hotline in the United Kingdom. The number is on the Toshiba UK support page.

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• When I type some letters on the keyboard type numbers with the number lock.

  Original title: change keyboard type.

  have a Hp laptop, I have managed to change the keyboard accidentally and now when I type with the number lock some letters on keyboard etc not the letter that is the letter lkj type numbers become 123 of the normal keyboard. HELP have what setting I changed it looked cant find any info. I have enabled the language setting and have defined as UK can not see anything that would affect the settings. My laptop has a normal qwerty keyboard with a locket key number on the baord. Can anyone suggest how I do for this comes back to normal please.

  [Moved from comments]

  Hi Martin,

  Thanks for the reply.

  He would be grateful if you can answer these questions to help you further.

  1. What is the exact model of the laptop HP number?

  2. you receive error messages when you install the software download?

  You can try to uninstall and reinstall the keyboard software

  Step 1: Uninstall the keyboard software.

  a. click Start, type device in the search box, and then click on device in the list manager programs.

  b. double-click keyboard, right-click on the keyboard you are using, and then click Uninstall.
  c. restart the computer.

  Step 2: Reinstall the keyboard software.

  a. first of all, turn on the device, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

  If please reply and let us know if you need help to solve the problem and we will be happy to help you.

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Adobe flash player "required update" come into conflict with windows updates?

  I've seen a lot of questions about the video choppy, slow stop cause buffering and go streaming video and people with adobe installation issues during their previous version was working fine before the last group of defender, family net 3.5 and other recent updates. Is there a conflict with the updates and adobe. I also with video problems jerky, buffering slow and red x where images are supposed to be from an installed update on my computer toshiba laptop vista Home Basic. I went through all the "fixes" proposed by Brian at KB 283807: images are not displayed on Web sites in Internet Explorer

  including advanced methods and still have the same problems that I started with. Can I ask you to check how many others have problems on this topic and provide a new update to fix what broke before? Appreciate any help on this problem.
  my system is vista home basic service Pack1 Intel pentiumCPU T2310 1.46 GHz, 1 GB 32-bit operating system. I missed something? Internet Explorer version 7.0.6001.18000 and I get a red x in the upper part of the about dialog internet explore that opens when you click on this function.  That is what it is?

  halcook,
  see if the following applies to your system whereas you are referring to the last update of the .NET Framework:
  An update for .NET Framework 3.5 Service Pack 1 is available

  Then, if this does not work, see if a system restore will solve your situation:

  The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. In the System Restore dialog box, click on choose a different restore point and then click Next.
  3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  If infact know you, it is an update that has caused this, then follow these steps to install an update at a time until find you that one might be:

  Click on start-> all programs-> Windows Update, click on change settings in the left menu. Select download updates but let me choose whether to install them, click OK. When you are alerted to install a new update, in this window, click updates see, uncheck all updates and select one at a time, install it, restart your computer, test and update. When you find the update either continue to ignore, look for it at http://support.microsoft.com/

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Conflict with emulation software detected

  I installed Windows Vista Ultimate (32 bit), I installed one of my games called Sim City societies and I get the error message - conflict with emulation software detected.   I don't know what kind of program could be causing it. About 3 weeks ago, I installed this Windows Vista and installed correctly. All my other games work fine, t is right with this one I get the error message.

  Any help would be appreciated.

  Chuck

  I found some information for you. It is for more than a year since this information below was sent, they should have the problem resolved with an update now. Have you tried updating to the latest version?

  http://TheSims2.EA.com/mysimpage/blog.php?user_id=2612925&date=all

  (Text below was copied from this link).

  Sunday, February 3, 2008
  Electronic Arts has admitted there is a SecuRom issue, on the plateau of SimCity Societies and issued a URL where you can learn more on this subject. they know that there certainly is a problem.
  Worse still, Sim City societies totally sows as a product, that it also get error performance, which makes the game totally unusable. I bought today and I am back in the morning, because it does not load because of the error! More than half who buy the game cannot play because of problems with SecuRom or the runtime error!

  Here's a URL posted by a leader of Sim, their form of a master Maxoid/Sim:

  Author: SimLeaderSix profile
  Date: 22-Feb-08 04:17 PM PST (updated on 23-Jan-08 09:47 AM PST)
  Subject: Conflict with error message software emulation with Game Update #2

  Some of you receive a error message when you run the game after installing the #2 game update that says conflict with emulation software detected.
  We are aware of this problem and it will be corrected in the next game update (soon, with a lot of exciting things).

  Here's how to work around this problem and come back to play the game.
  1. find the icon of shortcut for SimCity societies on your desktop. Right-click on the icon and choose "Launch Analysis".
  2. you will be prompted by a message box asking if you want to start a crawl. Select "? 'Yes '. Note: Make sure that the disk is still in the DVD player.
  3 disc will turn upward and the analysis will begin. You will receive a second error of emulation. It is part of the analysis. Select 'Ok '.
  4. analysis file will be generated. The message tells you where to find the AnalysisLog.sro file on your hard drive. It also tells you to send an email to * address email is removed from the privacy *.
  5 Securom will answer you by email with instructions on the replacement of the simcitysocieties.exe file.

  You can find more information about this on our support site:
  http://support.EA.com/cgi-bin/EA.cfg/php/enduser/olh_adp.php?p_faqid=10703&p_created=1124384855&p_sid= $p_sid #secu
  in the section titled "other questions with SecuROM.

  We apologize for this inconvenience and will the be fixed in the next update!