js function to connect to the playbackCompleted signal

Similar Questions

• Wireless network connection is connected with the strong signal, but stops working at random times

  Original title: internet says is connected with the strong signal, but stops working at random times?

  Hello
  For the last few weeks, I had problems with my internet connection. Wireless connections say I am connected and have the strength of the excellent signal. I know that this is not an ISP problem because my other computer works fine. I will be reviewed fine and then all of a sudden, the site doesn't load any more, although I'm always connected to the internet. This happens on Firefox and Internet Explorer, this isn't a browser issue.

  I read other offered on the internet and tried all, but nothing has changed. I have checked proxies, disabled antivirus and installed new, checked firewall, ran a check for malware, etc..

  Any help will be much appreciated because it becomes very frustrating to have to keep reconnected my internet when he says he's working.

  Hello

  I suggest you follow the links below and check them with the question:

  Method 1:

  Step 1:

  Start your computer in safe mode with network and check the number: http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Step 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters, and then click on uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  For reference:

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  I hope this helps.

• Unable to connect to the generator signal with LabView

  Hello

  I use a Tektronix AFG 3021 B signal generator. I installed the National Instruments driver (tkafg3k) for this device. My computer is connected to the signal in the block diagram generator, I place a block called "Example - Getting Started vi". I run the vi (there is no need of connections, so the vi has just the one block).

  The vi then gives me this error:

  Error 1073807343 has occurred to be initialized with Options.vi of tkafg3k
   

  Possible reasons:

  Driver status: (Hex 0xBFFF0011) primary error: error (Hex 0xBFFF0011) - information on the inadequate location or a resource that is not present in the system

  I know that the signal generator properly communicating with the computer because when I run "VISA Resource Manager", I can ask for the name of the device and it returns the correct name.

  -I'm using Labview 8.6.

  -I have NI-VISA installed 4.2

  -The driver that I use is available here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=005994E37F5B2318E0440003BA7CCD...

  -J' use the driver that is for version 7.1

  -J' uses this compliance record: http://joule.ni.com/nidu/cds/view/p/id/1095/lang/en

  What is the cause of this error and how can I solve this problem?

  Thank you.

  -Zach

  Do you really need to use the IVI driver, or you can use the LabVIEW driver? If you have need of IVI, configure you the Max with a logical name, etc.

  PS You have posted to the wrong Board. It is for the signal generators of NOR. You should have posted to the Instrument of narcotics control.

• WUSB54GC cannot connect to the right signal

  Hi, first time display. I have used this wireless adapter for about a year now, and it worked very well with my last linksys router. I moved in with some new people, and now the card does not connect to the router! The intensity of the signal is between 50 and 70%, and I know it's because much to my former place he used to connect with 30 to 35%. It will say that it can connect to the access point, but it does not connect to the internet. There are several other computers, for most laptops, using the net, including the one I'm on now who can connect just fine. It's just my desktop using the wireless adapter that can not connect.

  Briefly, it works when I try to configure using the easy button on the router. He's going to find the network, connect to about 50 percent, and at this point I can actually get online very well, so I know it works. But the progress bar will stay at 50%, then tell me after a few minutes it impossible to connect to the network... even if it did JUST!

  Any thoughts on what I can do? I have not tried much yet, so any suggestions would be helpful. Thank you!

  Try to reinstall the card:

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click Finish.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• Wireless is connected with the strong signal, but I still can't get

  get the 105 error message when trying to get on the internet with my linksys wusb60000

  Hi RussellMohr,

  What browser do you use?

  If you use Internet Explorer, you can follow this link & check if it helps.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  As I found by searching on the issue, many users receive this error
  Google Chrome code. If you use Google Chrome, you can follow this link and check if the problem persists.

  Webpage display issues: "this webpage is not available" (network errors 2, 102, 104, and 105)

  If you need assistance, you can post your question in the Google Chrome Help Center for assistance.

  Hope the helps of information.

  Please post back and we do know.

• order a fan with USB6251 and the Daq signal accessory

  Hello

  I have a school using Labview project and the USB6251 connected to the Daq signal accessory card.

  The Labview program must read continuous temperature (Ia 4 channel, internally) temperature probe connected to the accessory of Daq Board signals. When the temperature reaches an established value, then a led on the front panel should be lit and a singal output data acquisition should start a fan connected to the acquisition of data which cools down the sensor, then stops.

  Would it not be possible to do something like that? Even if I generate a square signal and the fan only works on the State of the signal. The fan requires at least 120 mV DC current. I'm afraid that if I take these courses for the acquisition of data, I could damage the unit.

  Thank you.

  I guess you mean 120 current my DC . If you look at your spec of daq card, you will find that the current max are far below 120 my. This applies to the two analog out and digital out. Take a look at this site, it may be useful to some. site nice http://www.me.umn.edu/courses/me2011/robot/TechNotes/motorcontrol/motorcontrol.html . If you want the speed controller, you have two options PWM or voltage of the motor regulation.

  Good luck

• No signal HDMI when connected to the TV (Aspire V3 - 571)

  Hello

  I'm really trampled here and need help. I have an Aspire V3-571. Please see the summary below in the chips:

  1 used to operate correctly when it is connected to my TV (via a HDMI cable)

  2. one night, what laptop was connected to the TV, picture started to blink

  3. after 20 minutes, the HDMI signal is not detected for the laptop

  4. Update driver Intel HD Graphics 3000 (Date: 29/01/2014 Version: 9.17.10.3347)

  5 tried to use different HDMI cables

  6. press Fn + F5 does nothing

  My TV HDMI port works with other devices when connected to it. What I'm missing here? Is there a defect of material with my laptop?

  Any advice or help on this would be much appreciated. Thank you.

  Hello...

  All information provided I see that you have already updated driver, tried different cables and also checked the HDMI port on your TV. I suggest you check the laptop's hdmi port by plugging another device like external monitor.

  If you don't get any screen, it could be a problem with the laptop's hdmi port.

• not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal

  All of a sudden not connected to the internet. Checked, connections w / wireless router. Everything looks ok. still no signal.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Refer to the following articles. The steps of troubleshooting in these articles may help you resolve this problem.
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Unable to connect to the internet with the new computer, the signal strength is excellent

  Bought a refurbished Dell D630

  from Newegg ($300 w / 30 day return) because navigation software, I run on the boat (Nobeltec 9) can only work on 32 bit laptops. I followed the instructions for activation. Windows XP Professional is preinstalled. Although, according to the icon in the right screen below, the signal strength of my wireless connection is strong ('excellent' signal, speed strength is 54.0 Mbps), I can't connect to the internet. Other laptops in the House go online without problem. What I am doing wrong? Chris

  Hi yakobi,.

  1. what happens when you try to connect to the internet?

  2. do you have security software installed on the computer?

  See the below Microsoft article and make sure that all the wireless settings are correct on the computer.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• No Signal message when the monitor is connected to the graphics card.

  Thus, after posting this problem on different forums, I was told that my power (300w) was too low for my Radeon HD 7570 I tried to install. After you install a 585w power supply, the problem is still happening.

  Model: HP Pavilion h8 - 1240 t

  OS: Windows 7 64-bit

  Error: Monitor says "no signal" when connected in the PCI slot where is the graphics card.

  Changes: this always happened, did not get a single card to run this stupid computer!

   

  The DVI cable is completely plugged the monitor into the PCI slot and the graphics card is fully in. The fans on the graphics cards spin but it is not detected at all. It does not appear in Device Manager.

  Data sheet:

  I7-2600 3.4GHz

  8 GB RAM

  Orion 585w PSU

  Radeon HD 7570 (it didn't come with the computer, otherwise it would work...)

  PEGATRON CORPORATION 2AD5 1.03 (I guess that's the motherboard)

  No. I went to Dell and downloaded THE drivers that ACTUALLY work. Computer restarted and everything works fine.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• to RBG - PC HDMI connection to the TV, but do get do not signal

  I'm trying to connect my HP Pavilion DV2 to my LG 32 '' TV with HDMI cables RBG - PC, but I get no signal on the TV. What can I do?

  Photo quality issues: Use a cable HDMI 5 meters (16 feet) long or less. Long distances can cause a degradation of the signal and the possible loss of quality audio and video. For longer distances, use a high grade cable (category 2) or a signal amplifier.
  Image: Make sure that the source of input on the display device is set to the right connection HDMI used - especially when your monitor or your TV has more than one HDMI connector. For example, if your TV is connected to a DVD player with HDMI 2, make sure that the DVD player is configured to use the HDMI in its menu and make sure that the TV input source is set to HDMI 2.
  Audio: Make sure that the HDMI audio is enabled in the digital camera of the source and the audio connection is connected to the audio output connector correct DTV.
  If you are using a DVI-HDMI adapter, you need to connect audio cables separated from the device that sends the audio and video signal in any other device capable of audio playback (maybe it's the TV or monitor is also used to display a video if the device has loudspeakers and separate audio inputs).
  If you try to send audio via HDMI to a PC, make sure that any built-in audio in the BIOS is set to Auto and make sure audio HDMI is selected for the main audio output of the operating system (for example, Windows Audio properties in the control panel).
  For more audio troubleshooting information, see HP TVs - solving Audio problems or using HDMI Audio with a desktop computer.
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00804730&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN
  Search Knowledgebase resources
  http://www.HDMI.org/
  FAQ
  http://www.HDMI.org/LearningCenter/FAQ.aspx

• My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  Hello Bonnie,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbd

  I hope this information helps.

  Please let us know if you need more help.

  Thank you