JSR-234 (AMMS): support for resolution actually unsupported

Similar Questions

• Win 7 Support for Intel 865 G (HP D530 SFF) graphics card

  I recently upgraded my HP/Compaq D530 SFF model (small footprint) Pc in XP - PRO on Win - 7.  The upgrade was easy and went smoothly.  Update Windows automatically updated the driver ADI AC97 Integratd Digital Audio to worm 5.12.1.5410 and the driver Broadcom NetXtreme Gigabit Ethernet to worm. 10.100.0.0, which are listed by HP as Win-Vista certified.

  Unfortunately, it didn't automatically update the driver for the hardware Intel 865 G chipset motherboard graphics.  Instead, it installs a Microsoft "generic" drivers VGA game.  My D530 SFF special is a 2.8 ghz P4 hyperthreading, but according to the HP "Drivers WEB site" (for XP), all versions of the HP D530 has the same graphics hardware. so, my exact submodel should not really matter.

  Windows 7 runs strong (at least as well as XP) on this beautiful little PC.  In three days, it has generated NO 'system' or 'application' error log.  Win-7 notification Center, however, annoyingly tells me everytime I open a program of specific graphics of Win - 7 (even the game of Solitaire) that my video card is running in "software rendering" mode with NO hardware acceleration.  Even the Solitaire game runs very slowly, but it runs without error.  Microsoft "DirectX Diagnostic Utility" indicates that DirectX 11 is running correctly on my PC and it can't find ANY error.  It indicates (as I already knew) that hardware acceleration has been turned off.

  I tried to run HP softpac "sp31335.exe" to load the version "6.14.10.4396 has ' graphics drivers running on this PC when installing XP.  The softpac ends before doing anything with a message that says "Unsupported OS."  Because softpac graphic drivers are supposed to be 'XPDM"consistent, I suspect they will probably work with Win - 7 (even if they are NOT supported by HP and may have some minor problems).  In any case, I would put a "restore point" and give it a whirl.  What I have to lose, because there is NO data or programs installed on this PC (clean install).  In the worst cases, I just reload Win - 7.

  My problem: I can't go to the version "6.14.10.4396 has ' graphics drivers because of Installer softpac (i.e."sp31335.exe").  Is it possible that I can bypass the message 'NOT supported by the OS' and get the graphic drivers to install anyway?

  Update: I solved my problem.  Even if HP has structured its executable program SoftPac (sp31335.exe) so that it will not install the version of graphic XPDM driver 6.14.10.4396 on a HP D530 with Windows 7 operating system, Intel made this driver available on its WEB site and is available for download. ZIP format.

  During a search, however, I found a newer version of the Intel driver and installed.  The Windows DirectX Diagnostics utility reports NO errors and hardware acceleration has been turned on.  In addition, 96 MB of memory is allocated to graphics.  I ran for a good week with graphics performance at least equal to what was previously done under Windows XP.  Data for this download are the following:

  Intel (r) 82865G Graphics Controller (Microsoft Corporation - XDDM)

  Driver provider: Intel Corporation
  Driver version: 6.14.10.4656
  Driver date: 01/08/2006
  ----------------------
  c:\windows\inf\ialmnt5.inf
  C:\Windows\system32\drivers\ialmnt5.sys
  C:\Windows\system32\ialmrnt5.dll
  C:\Windows\system32\ialmdnt5.dll
  C:\Windows\system32\ialmdev5.dll
  C:\Windows\system32\ialmdd5.dll
  C:\Windows\system32\igxpxa32. CPA
  C:\Windows\system32\igxpxa32. VP
  C:\Windows\system32\igxpxk32. VP
  C:\Windows\system32\igxpxs32. VP

  Apparently, Intel provided this driver to Microsoft for inclusion on the installation disk of VISTA to 865G family support (and other).  I extracted the following excerpt:

  Q3: Intel provides drivers for Intel Graphics Media Accelerator 900 (Intel GMA 900) WDDM on platforms based on the Intel 915 Express chipsets?

  A3: Intel will provide support for WDDM drivers, starting with the Intel® 945 Express Chipset family and beyond. See question 5 below for a detailed explanation of the WDDM support on platforms based on the Intel® 915 Express chipsets. However, Windows Vista is supported on the Intel® 865 G, 915 G Express desktop PC and 852/855 GM chipsets chipsets mobile running XPDM (XP Display Driver Model) driver included on the Windows Vista install media. Windows Vista will install on these platforms, but advanced features such as Aero in Windows will not be enabled as XPDM drivers do not support Windows AERO.

  The text above was extracted from the following link:

  http://www.Intel.com/support/graphics/sb/CS-023606.htm

  The version 6.14.10.4656 driver I use successfully on my HP D530 is discussed in the following Microsoft Forum thread:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/5406d400-e9ef-4A10-A913-3706c16b76d1

  The link to the actual pilot (who was eliminated on the previous thread) is as follows:

  http://CID-ad503689c74985c7.SkyDrive.live.com/self.aspx/public/Intel%2082865g%20Driver%20%5E5Vista-Win7%5E6.zip

  Hope this helps someone else, and I thank all the people who have created the references above.  My HP D530 now works FINE!

• Abandoned Downlaods and support for Firefox 4.0 - 5.0. Why?

  Why Mozilla interrupted downloads and support for latest versions prior to 8.0? Imagine my surprise when 8.0 was automatically installed, and found out that not only the Google toolbar was disabled, but other plug-ins and extensions were more consistent. To restore my previous settings of the browser, I had to downgrade way back to 3.6.24 version - and then also had to find compatible themes prior to use! You people really know how to throw the users in free fall! I didn't even know there was a new version. And how can I disable the automatic updates?

  You can actually return to the 7.0.1 version (which I assume you had). I know many users who have done and is happier with Firefox 7. However, because Firefox 8 took care of some safety and security vulnerabilities, compared to its predecessor, they recommend to have later.

  Personally, I've been happier with Firefox 7 so, but I'm still using Firefox 8 so I can try to resolve some problems and to report. My main problem with Firefox 8 is that it is slower on many sites, including my Hotmail email.

  In any case, fear I digress from the subject, I compiled a list of old versions of Firefox official on this Review of Firefox web page allowing you to download Firefox 7.0.1.

• Satellite C870 - 1 H 2 and support for virtualization

  Hello

  I am (was to) buy a Toshiba Satellite C870 - 1 H 2 (from amazon.co.uk).
  The specifications look ideal for me, but at the last moment, I thought to check if VT - x extensions are supported.

  I know that the processor supports extensions (as detailed here: [http://ark.intel.com/products/71465/]), but I know also that the extensions are often not enabled (or there is no option in the BIOS to enable them).

  The expression "Virtualization Technology" (which is present on other pages of the specification) is clearly absent from the plug laptop here: [http://www.toshiba.co.uk/discontinued-products/satellite-c870-1h2/].
  I saw some comments that suggest the Satellite * Pro * series usually provides the support for virtualization, but it always seems to be missing on many current models of Pro's specifications.

  I don't know why the C870 would not support VT - x, when we know that his material, but the specifications indicate that this is the case. On the other hand, I found no references to people complaining about the lack of VT - x support.

  So my question is, the Satellite C870 - 1 H 2 actually does support VT - x, or not?
  (and if not, because it takes just a very small piece of code BIOS, why not?)

  Thank you

  > The same issue applies. These models are supported virtualization

  VT support is always depends on the CPU built in Notepad. But you mentioned it in the first post.
  According to the page of the Ark from Intel, the Intel Pentium 2020 M processor supports Intel Virtualization Technology (VT - x)

• Support for Microsoft Windows Server 2003

  Hello

  Can you please let me know the end of support for Windows Server 2003?

  I manage and application that is currently running on Windows Server 2003 and will soon migrate to Windows Server 2012 but the exact date is not decided, as a lot of analysis should be done prior to the actual migration.

  Please let me know when Microsoft end this support for their Windows Server 2003 so that I can work on that accordingly.

  That would be really helpful. Any announcement already made by Microsoft on this? I found a few things online stating it would be 2015, but nothing seems to have come directly from Microsoft.

  Thank you in advance for the information.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• no support for dv6768se

  No update for the dv6000 BIOS

  Careful, HP has turned to deception. I bought thousands of dollars worth of HP products. I recommend the purchase of HP in my official duties as a Director of engineering. However, I was disappointed by the performance and support in all cases. I have two machines where I couldn't write media to recover. The most recent is with my Pavilion dv6000 laptop. It has the problem of restarting which may be related to problems of overheating GPU NVidia. This is known issue and HP must have decided to let go without worrying about the goodwill of its customers.

  The details for the latest incident are:

  Seeking support, I called a number found on the site of HP. I was charged for the support of a partner HP from a foreign land only to make things worse.

  They say that when I called HP they Mobile is unsupported and is obsolete. So, why is me she charged?

  My flag will not re-start. The symptoms started he did a software update from Microsoft. The update restarted my system and suspension system. After a stop forced (pressing the power button for 5 seconds), I had a soft recovery screen. I did a restore and it restarted. It hung again. This time, the indicated recovery screen I couldn't move forward and to contact support.

  I tried to get it back to the factory setting. This has seemed to work until I did the updates and tried to restart the machine. It hung again. I made the diagnosis of HW, but diagnostic tests indicated no problems. Analysis of disk of Vista also no problem.

  Before I looked for support I found that instead of restart, if I made a stop, I could limp thought enough of the upgrade to Windows 7. However, the question remained, and she seemed to be associated with HW. That's when I called HP support.

  First of all, I told them (ITechLine) was associated with HW and I didn't not need remotely diagnose my machine. They insisted so I spent a day watching a tech do the antivirus scans and scan disk. Later, they said they had solved the problem, but the technology that has been doing Diagnostics admitted that the original question seems HW and remains.

  How I got the number of ITechLine from the HP website. May have been my mistake, and a better number could be found on the HP website. The loss of time can be, I think, a concealment deliberate by HP.

  Later, I called enough people at HP (even in a foreign country) to find the HP had decided to abandon the support for my laptop and I couldn't support or portions of their share for this machine. The person said that the technology was obsolete. It is also darkening; Since a SATA drive for this my machine could be found for less than $50 and would have more than twice the capacity. In fact, I could buy a new memory 2 GB SODIMM, a new hard drive and a new battery for less than $90. Phone support charged $149.

  I have a few web searches to find the GPU NVidia overheating problem was probably the cause. Then, I disassembled the laptop to clean the cooling fan. The reboot problem was considerably reduced. I can restart 5 out of 6 times, which leads me to believe that it is the GPU overheating problem.

  However, now I can't use the optical drive to start the Windows 7 support. It does not show in my computer. Also, I can't write recovery media using the internal optical drive. I knew it is the bios, because one of the stages that I found on the web had to reset the cmos to the original. I see that is not the most recent. By going to the HP site for the update of the bios, I find that they no longer have the update and my machine does not get detected by their auto detect process. Forgot it that they did the laptop.

  So, I have a laptop of brilliant almost new look that will not work and is unsupported. It is obsolete, even if the State of the industry has not really progressed for laptops. It is Wi - Fi enabled with a large screen and could run all the latest SW until 5 days ago. It is too light to be a doorstop good, so it is useless. All I can get from HP is denial, disappointment and a dress (with a foreign accent).

  Being an EE, I thought that HP a tester has been great and that HP would be able and honorable. It's the end of an era.

  Someone know where I can get the free bios update? It's not worth spending a lot of money after bad to pay for a service update of the bios.

  It is a forum for users of peer-to-peer support for HP products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Here are the specifications of your HP Pavilion Entertainment Notebook computer dv6768se. Based on the information contained in the specification, this model is about 5 to 6 years. Years of the computer, this laptop is very certainly obsolete. You can find the update of BIOS, drivers and software for your computer on the HP support site at HP Pavilion dv6768se drivers and downloads. The most recent BIOS listed is;

  Description;
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation.

  Communicate the details;
  Exit the: 2011-03-30
  File name: sp52477.exe [1/1, 3.09 M]
  Version: F.34
  Compatibility: (MUST BE INSTALLED UNDER)
  Microsoft Windows Vista
  Microsoft Windows Vista (64-bit)

  Fix/enhancement;
  -Fixes a problem where the system stops unexpectedly in response and a warning window 0 x 124 appears when the laptop was turned off abnormally, then restarted.

  Please send Bravo

• Support for iTunes playlists?

  I missed on the support of playlists on the media center.  I see the ability to add songs to a playlist that is generic, but I don't seem to see any support for playlists even static or dynamic based on different metadata of the file.  Ideally, I would like to just take advantage of my iTunes playlists, but I see no ability to do.  Is there a way to have more sophisticated playlists, or this will be added in the future?  Without a strong playlist function it makes it a bit difficult to actually listen to the music of this and when you use iTunes instead of the media browser server function, you can always not native iTunes playlists (could be a limitation of iTunes server room, but I was hoping this would be a way to do it).

  I can't really talk about future features, etc. in a public forum, but it's certainly something we hope to come out sometime this year

  It will not be integrated with iTunes. Probably will be linked in our media browser.

• zBook 14: zBook 14 support of resolution 4096 x 2160

  Hello. I have a zBook 14 running Windows 8.1 Enterprise, 16 GB Ram, 64-bit, with switchable graphics (Intel HD Graphics 5500 and AMD over-pants M4150).  I am interested in Purchasing and hang this laptop to a mointor with the real resolution of 4096 x 2160 of 4K.

  In the document HP QuickSpecs for my machine, it says the following.

  DisplayPort w/STD (Transport multi-flow) Supports resolutions up to QFHD 3840 x 2160, depth of color 24 bits/30 to 60 Hz and WUXGA (1920 x 1200) monitors, with the color depth 24/30 bit upward to 120 Hz.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=4AA5-3655ENUC

  That would lead me to believe that it is not able to drive 4096 x 2160, but from what I understand that the resolution is possible on DisplayPort with the Intel Graphics HD 5500. Fact the documentation mentions not up to 4096 x 2160 resolution, because it was not available at time of writing instructors or my zBook really will not support this resolution or if it will work through the DisplayPort (in the laptop and through the docking station)?

  Thanks in advance for your answer.

  Hello

  According to the characteristics of the device, the display port supports a max resolution of 3840 x 2160 via DisplayPort w/STD (multi-stream Transport).

  You can connect a monitor with a resolution of 4096 x 2160 true 4K, but with the card video in unity, the resolution you will get is 3840 x 2160.

  You need to update the graphics card and install a video card that support 4K resolution for 4K monitor get resolution 4096 x 2160.

  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Although I am an employee of HP, I speak for myself and not for HP

• CyberLink YouCam does not support this resolution under your current settings

  Original title: CyberLink YouCam is a piece of JUNK! Someone help!

  I tried to ask this question and an answer, I had not helped. The first thing that happened was: I am trying to run YouCam on one of my friends computer. It worked before, I have no idea what they were doing to what I wasn't here. The error is said when I try to open it is "Cyberlink YouCam does not support this resolution under your current settings." I tried to change the resolution in the option customize when I right-click. There are currently on the highest resolution. I tried to lower the resolution a bit, but the same error message appears. When I troubleshoot the program, it doesn't tell me how to solve this problem. When I run the troubleshooting and I click on 'Try recommended settings', it is said that the sound running Windows XP service pack 2, but the sticker on the computer Windows 7. Its a HP computer. When I run the diagnostic tests in troubleshooting, error, said YouCam program isn't an option to select. I tried updates installed in the program and that did not work. I tried to uninstall and reinstall the program, and that didn't work. I have re-uploaded CyberLink YouCam 3.5 on the site and it does not work. The new error that appears is "Cyberlink Youcam do not support a screen resolution less than 640 x 490 with 96 DPI". The resolution of the screen is 1366 x 678 (recommended setting). In addition, when I put the program in safe mode, the program will start, BUT an error pops up saying that it can not locate the device. What the * happens, have worked on this for 2 weeks and nothing works.

  Clues of these similar positions.  Some of them speak to get a fix for the problem of the website of the manufacturer.

  YouCam on netbooks
  http://Forum.CyberLink.com/forum/posts/list/8118.page;JSESSIONID=601994404BA3648254AEDC27EA7EC315

  CyberLink YouCam
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/CyberLink-YouCam/TD-p/253590

  http://www.Google.com.au/search?q=YouCam+resolution+problem&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = jn5nT-yqE_D1mAWkmdmnDQ

• fact Intel(r) 865 G Graphics support for windows 7?

  My motherboard does not support windows 7 except my graphics driver. Is there a driver for it can you please sent me the link.

  You would go to Intel.

  Supports (or lack thereof) of any material that you connect to your computer running any operating system actually comes of (or does not) the manufacturer of the device physics of said - not the manufacturers of the system in question.

  Web page of Intel driver

  What is the specific motherboard model/manufacturer?

  32-bit or 64-bit Windows 7?

  Although - frankly - looks like you're out of luck.  The manufacturer (Intel) just can not support in this operating system.

  • support for WIndows 7 32 bit for the 865G chipset
  • support for Windows 7 64 bit for the 865G chipset

  I suggest you use the page to identify your Intel® graphics controller to check what you have.

  However, please take note:

  Intel released newer drivers XPDM for old graphics controllers?
  Intel does not plan to release new XPDM drivers for the following former Intel graphics controllers:

  • Chipsets Intel® 915GM/GMS, 910GML Express Chipset family
  • Intel® 82915 G/82910GL Express Chipset family
  • Intel® 82865 G Graphics Controller
  • Intel® 82852/82855 graphics controller
  • Intel® 82845 G Graphics Controller
  • Intel® 82830 M Graphics Controller
  • Intel® 82815 Graphics Controller
  • Intel® 82810 Graphics Controller

  So, again, you can be out of luck to try to launch a new Windows operating system (Windows 7) on a system with this video chipset without just buying another video card and put it in the system if possible.

• Unity Mobile Message Access 1.0 (1) support for Domino?

  The MMA 1.0 unit (1) supports the integration of unity with Domino? In the 4.1 (1) Release Notes, he claims that the MMA for BlackBerry is available for use with Cisco Unity with Exchange, but nothing is said about support for unity with Domino:

  http://www.Cisco.com/en/us/customer/products/SW/voicesw/ps2237/prod_release_note09186a0080531dd3.html#wp654640

  The release notes for 4.2 (1) do not mention anything about adding support for MMA for the unit w / Domino.

  Thank you.

  4.2 (1) the unit doesn't support MMA/Blackberry with Domino right now. However, this feature is currently targeted for the 4.3 version 1. It may actually require no code changes - if so, we can announce a support before 4.3 is released 1. In summary, it should be available soon.

  On a related note, GoodTech publishes good - support for Domino for use with compatible devices like the TREO and many more - targeted release is this summer. When it came out, voice attachments (.wav files) from the unit will be available similar to the existing solution of good/Exchange / unit. Interesting for non-Blackberry users...

• 22/07/13 - caveat, 'ZIRCON SYSTEMS, TECH SUPPORT FOR WINDOWS' CROOK, USING THE PLOY of id # 888DCA60-FC0A-11CF-8F0F-00C04FD7D062

  Last week, and now on the longest phone conversation with me this morning, Mon, 22/07/13, phone swindler wants to CHECK the ID NUMBER OF YOUR COMPUTER.  A 3rd call repeat 'husband' today, from "Steve Matthew," of "Zircon systems", where the staff is all "Microsoft Certified technicians".  Said our PC has been disconnected from the server "universal routing" and needed to check the identification number.  Said computer infected and disengaged, errors with malicious files.  That 50% of Microsoft applications does not.  Finally, after several questions polite but stupid me, as if to say but our computer works OK?  the appellant was told that he is temporarily hung up a temporary server! but it must be reconnected...  After having his name and telephone number - strongly Indian accented man "Steve Matthew" on the phone # 408-498-3608, and have patiently give me the 888DCA60 etc etc 32 numbers, he indicated that he understood my being suspicious, but it is a Microsoft Certified tech, calling for Windows, have we not Windows 7 or XP or Windows 8, etc.?    And he said I could not find the computer ID number easily, it wasn't on our guaranteed purchase paperwork, etc, that I would need to go online with him, to find our location.

  Knowing that registrations for computers, go directly to the manufacturer only if you send the information on your purchase, and that no known iin manufacturer sends the modern world 'Oops, you're disconnected' phone calls, it seemed a bit of fun to keep to provide information...

  So I explained to Mr. Steve, when he repeated for the 4th time that it has been certified Microsoft Tech and trustworthy and kept warning me that our computer would break soon, that, by analogy, certified Subaru Techncians had simply taken a few classes to automotive Subaru training and were not necessarily qualified or guaranteed to work on my car the certification does not matter, you should still consult your dealer, the garage, make sure it's good reputation.    Then, I asked him directly, so, on a phone call from me, a total unknown, he would be willing to send me or transfer to me $2 000,00.  He actually misses, in dismay.  So I repeated it-$ 2,000, say, in US dollars, would it send it to me, if I had called and told him his bank account had been disconnected from his bank, and I needed to reconnect it?   He ate and asked me ' you mean $2,000! $? ' so I said yes, would he give me or transfer to me on this amount, based on a phone call?  He said absolutely not.  End of quote.   I told him how we would check with some type IT geek friends we know, took his phone, name and said I would be back to him and please DON'T NOT CALL BACK IN AN HOUR, BUT PUT us WE HIS DO NOT CALL LIST.

  At this point, I googled Zircon systems - and there is no such American society less than a jeweler or invest co. in Illinois), although I had a systems Zicom in India, which seems to be the sale of legitimate & electronic security systems and then I googled the identification number, find some great ads about what happen and asks what will be PayPal scam, if one agrees with the appellant and goes online and follow their directions.

  (See mutation 2012 of a David Jacoby to http://www.securelist.com/en/blog/208193750/ , who described a telephone scam quite similar, with the technical information, copy requested screens, orders).   Maybe giving a technical support genuine or scam to support people on your side, an idea of what was going on my caller to walk me through, if I had fallen for the Universal Server disconnected claim it does?

  Hope this helps to update your information, files.

  In any case, this is my first time ever having reported a telephone scam.  Thought it would do, seems since then I received a call from update and more sophisticated scam.  My husband simply hung up on the caller last week - he knows little re our PC, I ask more tech-savvy people to help if necessary.  But then, the scammer called back, too.  If something had to be done to put an end to the process?

  Don't forget, if you get that kind of call, simply ask the crook to trust YOU, say that you are a certified technician to bankruptcy with years of training from the IRS.  Ask if he is personally prepared to transfer $2 000,00 to you (via Paypal, do not give your bank account to him for any potential future direct deposit!), but preferably by cheque of... And it must be sent to the address of your worst enemy in life, as you need the alimony to a former spouse.  Or to a mailbox in a different city than your...  And then tell him you'll telephone him with the identification number of your computer, once you have verified that the money is in hand.

  Done politely, in a pleasant soft voice, you would be surprised how unprepared the scammer or snow must be befriended as a simple employee, but itself for you send funds then asked?  I'm looking seriously for the money from them here - I'm not asking in fact send me $2,000, but I said that I was trying to explain by analogy, with auto - trained technicians and requests for money, why I wanted to check with the best-known people before giving identification numbers.  Analogies, it seems well understand what we hear - an example?  I just him speechless when I wanted a large amount of course him sent me instead...

  Uh, Mr. Steve Matthew, Zircon systems, technical support for Windows company, also clearly didn't "want to send me a few thousand, and he hung up, after I suggested that he does not call again, asked him to put us on the list of subscribers do not call...   Clearly a new variant, although, in the wick on the Microsoft Certified Tech claims, the name of Zircon systems company and so I thought after that.

  Hello

  I had a similar call from Indian women (?) strongly accented called 'Janet' of 'Zedconnsystems', based in Floria, USA. She had called asking to speak with my roommate to tell her at the computer (which is mine) showed the error messages.  She shook off the usual garbage and was unable to answer most of the questions I asked, but gave his phone number as 4084983608.

  As far as scams go this one seems rather transparent, but mention on the off chance someone saves a load of hassle!

• TMS support for SQL (standard/express) 2012

  Is there a timetable yet for 2012 SQL support for MSDS?  I have a situation where he would have preferred to use SQL 2012 rather than 2008.

  That said, someone has actually tried it and if yes are there any problems or "traps"?

  I guess while I'm, what about Windows Server 2012 support?

  Hello Anthony.

  Research on forums a few Windows and SQL 2012 support questions.  This is a debate which answer your questions both...

  https://supportforums.Cisco.com/message/4046686

• Managed provider support for XmlType

  Any idea when XmlType will be supported by the managed provider?  It is the only thing preventing us from adopting right now.

  Oracle.ManagedDataAccess.Client.OracleException: Unsupported column datatype

  Malv. link: managed provider support for XmlType (qustion arhived because)

  I use odp.net.managed.121.1.2

  It seems that always xmlType is unsupported. It is work around?

  It seems that you use ODP.NET of ODAC 12 c R2, which does not support XmlType. If you go to ODP.NET in ODAC 12 c R3, you will be able to use XmlType. It is currently supported in this version of managed ODP.NET.

• Support for Nikon NEF D810 in Photoshop/Bridge CS6?

  I don't think that the NIkon NEF raw format has changed over the past years, but I have to ask: is there support for the D810 in CS6 NEF files, or I have to go to CC or something like Lightroom?

  I intend to take pictures in the 14-bit uncompressed (not the lossless, but actual no hold NEF/RAW image format uses the D810 (even once, do not know if it is different from the previous models like the D700/D610/D800 that have been out for 3 years now.)

  Hi dawnequipment,

  Yes, you can update plugin Camera raw to 9.1.1 CS6 software, which supports your camera Nikon D810.

  Please use the below link for the same thing.

  Download link: plugin Raw camera setup

  Let us know if it helps.

  Kind regards

  ~ Mohit