Judgment of A60 Pro satellite after 15 minutes after the update of the BIOS

Similar Questions

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• IBooks on ipad pro crash after IOS updated with 9.3.1.please

  IBooks on ipad pro crash after IOS updated with 9.3.1.please

  I have the same problem after update 9.3 OS on my Ipad 2... Crashing in IBooks. PDF and missing books. I have access to my books for about a minute before it crashed.

  It still occurs with the 9.3.1 update.

  I don't really know where to go then except put it there the 9.3.1 upgrade did not fix my problem.

  Thinking that I might have to consider for an Apple Tech which is an expense I really don't think I should have to bear, because I did not cause the problem that everything worked fine with my iBook before upgrading the OS 9.3.

  Thank you

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• My Equium A60 not startup after Windows update

  Hello.
  I have an Equium A60 (PSA67E) about 1 years. There has been many problems with this one recently. First, there was the problem of overheating. The machine would heat up and stops by itself without any warning. I tried many options by keeping the cooling ports clear but dint help not at all.

  I've recently updated my bios version 1.90 such suggested by Toshiba. I always see overheating so far after the bios update.

  The most annoying is the display driver which is in this case a lack of mobility radeon ATI 7000. This would cause the display to become oversized and the resolution is very low. It would go without saying when I restart the machine.

  Last month, I reformatted the machine using the Toshiba Recovery CD. Everything went well until I am passed on the automatic update of windows. The first update coming, and I install and reboot the machine to let it function. He's fine. Comes the second update is installed and I have proceed to restart to allow functional upgrades, it does not start. The machine keeps starting over and over again without loading the OS. The screen is the typical Toshiba boot screen with the yellow light (charger) on the screen and after some time a blue screen is delivered for a short time (I am unable to read this error message it is said) and the machine starts start again. What can be the problem?

  I need to install windows XP SP2, and for this I need to go through the Windows Update. What can be the remedy and on the update of the available display driver. I tried, but it makes the situation worse.
  I used the recovery CD at least 20 times that there is no alternative. I tried to start in safe mode but din't work.

  Hi, Germain,.

  According to your description of the problem it doesn't seem to be anything wrong with what you have done so far, but I just want to clarify a few points.

  1. After installing the recovery CD system you install/activate your anti-virus software?

  2. are you using Windows Update in automatic mode or you manually select the update process?

  I recommend you to turn off automatic error (Advanced tab in system properties) reboot so the system will not attempt to restart when you get your blue error screen. This will allow you to see what error.

  Kind regards

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye

• Re: Satellite A300-243 - updated after the BIOS, it did not work

  Dear members...

  Good day...

  I have a problem with Toshiba Satellite A300-243, I installed the Bios after you download from Toshiba Web site, and when it's over, he restarted the machine and did not work, just turned on.

  So if any body can help me to solve this problem, I'm happy.

  Thank you...

  Hello

  It looks like that the BIOS update has no...

  What can you do now?
  Yourself you can do nothing. The only change is the authorized service provider. Technicians can try to reflash the ROM module

  Sorry mate, but in this case you need professional help.

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Upgrade Windows 8 Pro blocked after the first reboot

  I have a HP Media Center PC m7470n. When I upgraded with Windows 8 Pro disc, after the first reboot, it gets stuck on the Windows form with turning points. He's not going back to XP and when I stop and restart, he goes right back to the same screen. I tried to boot from a hard drive and CD ROM with the disc in. I also tried to do a system restore, but it still maintains just that goes back to the same screen. , I even contacted Microsoft Support and after 1 1/2 hours, I had to let go because I had to go to work and they do not have a solution for me. I am not able to go in Mode safe either. Can someone help me with this update or at least get back to XP so that I can at least use my computer? At the moment I feel that Windows 8 Pro comes to have my computer in an oversize weight.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you can not connect to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• I just bought Adobe Acrobat Pro XI, after the expiration of my subscription still do to keep the ins Acrobat

  I just bought Adobe Acrobat Pro XI, after the expiration of my membership can I still get to have Acrobat installed on my computer?

  Or, if you want to say, what happens if a subscription expires?

  The software remains on the computer, but does not work. Windows will try to launch it, always default. You would like to renew the subscription, or uninstall the software.

• Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

  Hello!

  Before I have a little problem with my fan, but I do it with the BIOS update. His work!

  Now, I have a little problem of different...
  I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

  Its make me crazy...

  Hello

  Seems the CPU and GPU don t run full implementation after the BIOS update.
  Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

  Check to see if you can change an option is the BIOS.
  You can also try to update a graphics driver and could control Windows 7 power management.
  Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.