'Jumbo mtu system' configuration during production?

Similar Questions

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• All-in-one HP Officejet J4540: stuck on 'System control' during the installation complete installation OfficeJet J4500 series on Windows 10

  Tried to install (OJ_AIO_J4500_Full_Win_WW_140_404 - 4.exe) according to the HP support page is the correct installation of installation Officejet J4540 on Windows 10.  Printer was working fine when I was on Windows 7 and I have upgraded to Windows 10 and of course the printer did not work.  A ran all HP recommended programs and never can get this printer is installed.  Installation always stalls at the "checking system".  He never goes to the 'preparation for the Installation System' and 'Install Software' and 'configure the product.  Don't ever go to this and I let it run for hours without success.  I uninstalled all HP and tried to re - install on 10 to win without success.  Lost a ton of time on it... Please give me a proven QA had the solution... Thank you!!

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  If you have any other security software, be sure to disable any real-time Protection during installation.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe

  And then run the installation file and check all difference

  Kind regards
  Shlomi

• Flow control and Jumbo Mtu

  Hello

  I have a Dell document "Win-Hyperv-2012OS-Config". He asserts that before installing the kit EQL HIT, we have to configure network (tool of Broadcom Advanced Configuration Suite (BINS)) as:

  Option	Value
  Flow control	Rx & Tx active
  Jumbo Mtu	9014

  Is it worth for native Windows 2012 grouping configuration?
  Now I see MTU is configured 1500 on all cards, has it be changed and why?

  Thank you

  You use grouping of NETWORK adapters on a Windows host storage EQL. You can see odd behavior and errors when trying to write to a volume and have only one connection (because THINGS that there is only one card NETWORK).

  Under the special workloads and environments a MTU of 9000 (Jumbo) * can * give you better performance. For sure, you will see a higher latency.

  You must configure your pSwitch first, and then the driver/NIC in the host operating system.  The EQL use JumboFrames automatically if the initiator connects successfully with a MTU of 9000. See the 'reports' in the EQL GroupManager tab. Hold the mouse on one of the initiator of connection messages and look at the end of the line.

  Kind regards

  Joerg

• For acrobat was interruption of 11 system configuration was not completed.  Now can't delete or re-install again.  Can you help me in this problem?

  During the installation of Acrobat 11, interruption occurred and the system configuration was not completed.

  Now the program does not start.  Removal of the program is not allowed on top of the reason.  Re-Setup is not allowed for the reason that the system has already produced installed.

  I'm right with her.  Can someone give me an idea how to remove or re - install?

  Street

  Hi rues80079274,

  Reboot your system, uninstall Acrobat XI using this link Download Adobe Reader and Acrobat tool - Adobe Labs, stop, repeat & reinstall Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know how it goes.

  Kind regards

  Nicos

• Satellite L500D - always get the system configuration

  Hi, I'm trying to get my new laptop of wifes of configure. It's a L500D.

  I chose 64-bit and all I get now is system configuration. Then it will come in saying we need restart to install the drivers? has been doing this for about 30 minutes now, is there somethig wrong or is this normal?

  It's the 10th time, it has gone and done that.

  Hi Ryan,

  I have the same Satellite L500 which is similar to yours and that of s. The laptop restarts often enough until the installation is complete. That s not unusual, it is necessary to install all drivers and tools you need.

  So I hope you didn t stop or cancel this installation. Just wait a little longer and during this procedure, you can drink coffee and watch TV! ;)

• Satellite T110 - loop 'system configuration '.

  Hello

  I'm a newbie, but not a total newbie. Just bought a new Satellite T110 pre-loaded with Windows7, lit, the first screen asks me to choose 64-bit or 32-bit, I clicked on 64-bit machine then entered a default factory recovery mode, but has now been locked in a loop of "system configuration" with several reboots during more than an hour - that makes any sense?

  Kind regards

  Pash

  You won't believe me, but it makes sense. I obtained through Satellite L500 and I noticed the same thing.
  After nearly one hour and several OS reboots was pre-installed and configured correctly.

• Satellite L675 is stuck in a loop of "system configuration".

  I have a Satellite L675 pre-loaded with Windows7 64-bit, because it was very slow, so I decided to recovere it at the default out-of-box factory.
  But he was now locked in a loop of "system configuration" with several reboots during more than an hour - that makes any sense?

  Kind regards

  If the recovery procedure is not in the end it makes sense. Recovery procedure may take up to 2 hours.
  Any donation interruption t installation and wait for that configuration and recovery image installation will be completed.

• System configuration "Rename Alias" API isn't updated MAX

  If I run the 'nisyscfg.lvlib:Rename Alias.vi' the System Configuration API , I noticed that the new alias is NOT set to day/relfected Max in the tree of devices and Interfaces.

  I have confirmed that the Alias changes indeed via the API because constant browing of resources does VISA shows the new alias name.  I have also confirmed that the 'Name' MAX field points to the same data element that changes the API by going to MAX-> tools-> NI - VISA-> VISA Options-> General settings-> alias; the API and MAX are going to change this field.

  Is this a known bug? Is there a work around?  Pressing F5/Refresh, reboot MAX and even restarting the on-board controller has not fixed the problem.

  When you make the call to find Hardware.vi, I bet you limit the search to "ni-visa" in the setting of Experts. When you rename the devices, you change the NI-VISA alias alright. What you've done essentially modifies the view of VISA but not the rest of the architecture of NOR. So when you see the device in MAX, products OR use actually VISA as the mechanism of communication, even if NI-VISA see these devices and to report on them. Remember that different drivers may have different aliases storage locations; for instance, IVI is still somewhere else, you might have a different name for the resource.

  To change the alias for all the devices you see in MAX, you cannot limit the Experts involved in the query. The best way would be to create a filter that defines "Is the device" true, who spend in finding material instead. Then when you call Rename on these resources, it will have the desired effect.

• status of landmark HP + generic host process for the + serious mistake WMI + system configuration utility + ALG pop-up messages

  I have a desktop computer, with Windows XP. He has a very good performance for 4 years. But in recent days, some of the messages appeared, and suddenly, the computer restarts. and if she did ' t restart directly, she performed very bad (gel + slowly). 6 messages appeared, they are:

  1 - generic host process for win32 services has encountered a problem
  2 - problem WMI
  3 - the system has recovered from a serious error
  4 system configuration utility
  Situation 5 - hp cue has encountered a problem
  6-application Layer Gateway service
  Help, please.

  Hi Alaa' Kabbani,.

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  3. What is the brand and model of your computer?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Disconnect any new hardware

  If you have recently installed a new hardware device, the necessary driver so that the material can not be installed or the driver may be damaged or incompatible. To determine if this is true, follow these steps:

  1 unplug the appliance.

  2. restart Windows XP.

  If Windows XP starts successfully, there is a driver problem with the new material. Contact the manufacturer of the device for drivers updated to the device or to learn more about known hardware issues, so that you can reinstall the device.

  For information about how to contact the manufacturer of the device, refer to the Microsoft Web site at the following address:

  http://support.Microsoft.com/GP/vendors

  (http://support.microsoft.com/gp/vendors)

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If this method resolved the issue, you are finished. If this method does not work for you, go to method 3.

  Method 2: Disable automatic reboot in case of system failure

  If the system reboots continuously, do the following:

  1. reboot the computer.

  2. as the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  3. use the arrow keys to select disable automatic system error rebootand press ENTER.

  4. If you receive an error message, follow these steps to search the Microsoft Knowledge Base for useful information about the error message:

  a. copy the text of the error message.

  b. visit the following Microsoft Web site:

  http://support.Microsoft.com

  (http://support.microsoft.com)

  c. type the text of the error message in the Search box, and then type the name of the product you are using, for example "Windows XP".

  d. click on Searchand try to find an article that will help you solve your problem.

  If this method worked, you have resolved the problem of your computer restarts continuously. However, you can continue to troubleshoot driver problems. See the "Symptoms" section again and determine which method to use to solve the problem.

  If this method worked, you are finished. If this method does not work for you, please try Method 3.

  Method 3: Use the known last good Configuration feature

  If you can start the computer successfully, you can use the known last good Configuration feature. This feature uses information that was saved the last time that you shut down the computer before the problems started. This feature allows to restore your registry settings and drivers to the previous information.

  If you are not completely sure what that means, don't worry. None of these reviews will damage your computer. However, you should be aware that if you do this, any changes made to your computer after the date of last known good configuration will be lost.

  If you have recently installed a driver and know a configuration problem, this method will probably work for you. Unfortunately, this feature does not solve the problems caused by missing drivers or corrupt or files.

  To use the last good known Configuration, follow these steps:

  a. restart the computer.

  (b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

  c. use the arrow keys to select last good Configuration known (your most recent settings that worked), and then press ENTER.

  d. If you are prompted to select an operating system, use the arrow keys to select the operating system and press ENTER.

  If this method worked, your computer is restored to a good working state. You still have to investigate on what caused this problem. To do this, please see the "Next steps" section for troubleshooting resources more.

  Also refer to this link: Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=G1iW6Kb0x5J

  WARNING CHKDSK:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you have trouble following the suggested steps or if the problem persists, please let us know and we are ready to answer them for you.

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• THE SYSTEM CONFIGURATION SHOWING NOT

  I bought the office base model Inspiron 660 s with DOS operating system dealer. IAM entering service no tag. to check the configuration of the system but the following message is displayed.

  On clicking: view the original Configuration:

  Message: There is no information associated with this system configuration.

  PL guide how to check the authenticity of the product.

  The hard drive and bios disappeared already own by the dealer that you purchased. Dell sells no pc with BACKBONE. I suggest that you go back to the dealer and ask for help.

• Cannot open the Adobe reader protected mode due to incompatibility with your system configuration.

  Original title: trying to open a PDF file problems

  I use Windows 7 on a 32-bit computer with Firefox and Adobe Reader X 1.  Try to open a PDF with any application or attempt to open Adobe Reader via the icon programs, product now the following error message:

  «Adobe reader could not open protected mode due to incompatibility with the system configuration you.» Want to open Acrobat Reader with protected Mode off? "Answer either 'Yes' to this question produces:"Adobe could not load the DLL base. "

  On other occasions, trying to open the pdf file has directed me to an interface recommending me to open it with my Canon printer.  Try to change the default program used on a PDF file generates the above error messages previously.

  I reinstalled Adobe and who did it.  Clearly a problem for Adobe.  Regret not having tried that earlier, I thought that it couldn't be that simple.

• Change the system configuration and yet no difference in config

  This question is about a router CISCO1941/K9, Version 15.0 (1r) M15.

  When I type

  reload in 4

  He asks me

  The system configuration has changed. Save? [Yes/No]:
  % Please answer 'yes' or «»

  even if

  See the config differences: running system of archives-config nvram:startup

  gives

  ! Contextual Diffs Config:
  ! No changes have been found

  and

  Show running

  gives

  Current configuration: 5031 bytes
  !
  ! No change since the last restart configuration

  My question is: How can I determine WHAT system configuration has been altered?

  As far as I know, the only thing changed is the Terminal length that I occasionally switches for use with the recording of session with PuTTY, which is

  Terminal length 0.

  This router has been in production for months and I don't want to break anything (obviously).  I need to make a change to the configuration of the access-list and wanted to protect me by saying to reload in 4, and then I was probably cancel about 1 minute.  But now I'm worried about it save yes/no question.

  Thank you.

  Hello

  Just save config running and configuration of boot in text files and compare them. Have you enabled all logging on the router?  It may be because of this.

  Just make sure that your configuration register is 0 x 2102. You can see by the show version command

• DataGuard configuration in production

  Hi friends,

  I have to configure my production environment (primary) to a database of pending. I have a question for this I need to make some changes in the file(spfile/pfile) parameter any time will I have to bounce my primary database or it need the downtime?

  Thank you and best regards,

  Arya

  Hello

  To configure dataguard, must actually DB bounce we configure dataguard in my company without rebound. All the required parameters can be defined using the alter system command to set the primary database memory, even if you use on startup pfile. When using pfile don't forget to edit to carry all the settings that have been defined on the primary database to configure dataguard so that when the DB is rebound later or to scheduled maintenance window, the settings will be retained and it posed problems for the installation of dataguard.