Jump and mix tracks after firmware upgrade?

Similar Questions

• Impossible to connect to the gateway SSL of the company site and program database after that upgraded 10.0

  Dear All/Admin/Tech,
  After the upgrade to Firefox 10.0 staff of my company in Indonesia can not rained access gateway SSL for the web of our company and therefore cannot log on to our web database program.

  In my tests, in Singapore (with the same ISP fiber broadband), I have the same problem.

  Both Chrome and IE have no problem, but Firefox stops on error "the connection was reset".

  Firefox is now super sensitive to the shift of site Web, allows no ports or y at - there some problem in which Firefox to reject Web page or program?

  So far, that seems to happen on Firefox 10.0 and our SSL https web portal. What is good on all other browsers.

  Help, please.

  Thank you and best regards,
  Joel Li

  I also have problems with 10 FF and Fortinet VPN.

  It helped me a little... http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/e6e8ada8-BC12-4f6f-8de3-1d3fd2ff4931

  The problems seems to be in the Microsoft Security Update KB2585542, that TLS and SSL fixes. Apparently some websites that use SSL do not work properly because of this.

  I had to disable the update of security KB2585542, then downgrade to FF 9.0.1.

  BUT I don't want to remain unpatched and with an older version of FF. A way around this problem without downgrading?

  EDIT: Just to be clear, even after I disabled the patch MS that I kept getting "the connection was reset" in FF10. Everything worked great until I upgraded to FF10 even with the patch on.

• Flexflash controller is in a lamentable state after firmware upgrade

  Hello everyone

  I get an error message indicating that our flexflash is unhealthy after firmware update.  Say it running old firmware.  I didn't even know that us had flexflash on our systems and do not now see update the firmware.  I read that you are supposed to see in the storage tab, but do not see.  How to solve this error?

  I came across the same thing after the 2.2 2.2(5a) (3rd).

  Everything was fine, but who. He was a minor.

  Was the only thing I could do about it, decom the blade, take it out, put back in, re - ack the server. Then he went away.

  (We use the FlexFlash and it caused no problems before or after the warning). You can try to reset the FlexFlash controller, but I don't think that will work for this particular minor warning.

• HDR and Panorama fail after the upgrade to Windows 10

  After the upgrade to Windows 10, trying to merge pictures gives the message "unknown error occurred".  After the first attempt, I've updated my driver graphic card, and HDR worked.  But the next time, the error message reappears, and this has been consistent - if the graphics card is engaged or disabled!  My graphics card is NVIDIA GeForce GT 750 M.

  The problem turned out to be unrelated to Windows 10.  For reasons I can't understand, it is limited to one set of photos taken on a single morning. So, no problems with Windows 10.

• First transformed into mode track after 2015 upgrade

  First transformed into test mode after the upgrade of 2015. On my laptop, all right, but it happened on my MacPro. Although I used it since the end of 2014. When I connect to my account all of a sudden, this changed to a free membership? But I am a member paying for at least six months. What happens here?

  Problem solved. It turns out I got two account and connected with that bad. Pfff what a relief.

• Extension stopped working after firmware upgrade WN2000RPTv3

  I updated my firmware to wn2000rptv3 - V1.0.1.4.

  Now, my range extender only goes to a page in the account registration.

  Nothing I try (mywifiext.net, http://www.routerlogin.netor .com) helped him.

  While I didn't create an account, I tried to anyway.

  After you have filled all fields, the next button stayed grayed.

  It didn't matter how many times I've tried, it's always the same.

  I tried with passwords symbol 12 and 15. No luck.

  Now, my extender is basically useless unless someone can tell me how to solve this problem.

  The Extender worked like a champ before the upgrade.

  Just goes to show that newer isn't always better.

  Any suggestion is appreciated.

  Thank you.

  Thanks for the reply DarrenM.

  I followed the instructions but it will not be upgraded. I tried several times.

  Finally, I rebooted the computer and retried all on and VOILA, it worked like a charm.

  I even braved upward and updated again and it took the update of firmware as a champion.

  Don't know what I did wrong on the first upgrade.

  Don't know what tomorrow will bring, but tonight, I'm a happy camper.

  Thank you very much!!!

  SM

• WRT310N no admin after firmware upgrade is

  I went from 1.06 to 1.09 and the router works, all devices, including wireless are able to access the internet.

  However, I can access is the GUI.   Before the admin access upgrade was configured to use HTTPS only.   After updating Firefox and Internet Explore give a warning of the cert.  If you 'ok' after he tries to display basic settings page (the title of the page shows the basic settings), but the page loading hangs before anything be it appears.

  If I close the browser and try to try again it will fail altogether.  If I reboot the router as described above will happen once, then another reboot is necessary.

  Any thoughts on what I might try to get it working again?

  Thank you

  You upgrade the firmware on the router, I suggest you to reset the router for 30-35 seconds. Cycle power to the router and check.

• Can't go forward or backward in the chapters of the audiobook, after Firmware upgrade

  I have improved my rocket to the 2.03.33 version of the Firmware and now I am unable to go forward or backward in the chapters of the Audiobook. I have done this before to upgrade. Please advise thanks.

  Here is a link to 2.03.31 if you want to try a downgrade.

  mp3support.SanDisk.com/firmware/fuze/fuze02.03.31.zip

  mp3support.SanDisk.com/firmware/fuze/fuze02.02.28.zip

  You can see how this link is built, then you can also try its replacement by other version numbers - 2.02.2 x (X for everything you want to try) - to find other versions.

  Download the file, unzip it, drag FuzeA.bin to the drive letter for the "rocket".

• Ergonomics of Linux lost after Firmware upgrade

  I use my rocket for some time, with no major problems, using Ubuntu. But recently I've updated the firmware to V01.02.28 (using Windows) and now every time I connect Ubuntu the thing crashes with a message 'written', and I am unable to mount. I tried downgrading to the V01.02.26 and I still have this problem. I noticed that the splash screen has not changed at the time where decommissioning, so maybe I was using an even older version.

  You may have already checked however double check settings USB drive... after the update of the firmware, I noticed mine has been switched back to automatic detection by default.

  As side note... you are not alone in what concerns the Assembly of the "rocket" under Ubuntu.More often not I need to disconnect/reconnect the device before it is mounted. Although often it will not mount even if lsusb detect. Restart often solves things.

• Wmb54g doesn't work after firmware upgrade?

  I have a wmb54g wireless music bridge. I just upgraded my Gigabit Wireless-N router. (WRT310N) My bridge worked OK, so I've updated the firmware this morning. Since then, my network will not recognize the WMB54G. I have reset the unit several times and spent 2 hours chatting online with Linksys. It still does not.

  I uninstalled the software bridge. I hung the bridge directly to my router, but still not my network will not see it.

  I tried to access the bridge directly by 192.168.1.210, cannot do?

  Update: bad news, cannot ping bridge when it is connected directly to the router. Linksys will send a replacement WMB.

• Cannot access the WAP54G after firmware upgrade

  I have updated the firmware of my WAP54G v.2; We just started to use the AP again and when I checked, I thought I would update. I was going to 1.2 or 1.4 to the latest firmware using this link http://homesupport.cisco.com/en-us/wireless/lbc/WAP54G, version 2. I could see the AP before starting my Dlink router. I downloaded the firmware and the upgrade of the access point. She completed successfully, but when I tried it I could reach him is no longer. I checked the router and it shows is no longer there and I can't access it via the installer.

  How you try to access the router configuration page? If the access point is connected to your d-link router, make sure that your router's default ip address and AP are in the same range. The IP default WAP54G is 192.168.1.245.

  If the router's default IP address is different, so you will need the AP wired to your computer and assign a static ip address to your computer ie: 192.168.1.10 and then connect to the access point configuration page and settings wireless entry and change the default IP of AP, which is of the order of your d-link router.

• Cannot print or scan from MacBook Pro to Officejet 6500 E709n after Firmware upgrade

  I have-

  MacBook Pro; OS X 10.5.8

  JO HP 6500 E709n: Firmware RBP1FN0935AR connected by Ethernet to my network.

  Also several XP and Vista machines machine.

  I have most of my printing and scanning of MBP.  I've updated the firmware the week last version (above) found under the XP software and drivers for this printer.  I thought more recent firmware is always better.  In any case, after that, I can no longer print or scan from the MBP.  I've uninstalled and reinstalled the software on my MBP 2 times.  And I followed the instructions on this forum for posts with similar problems.

  I can see the printer in the Systerm preferences > Print & Fax.  He is registered and has a green light.  I can navigate to the printer and connect.  I can not state of ink.

  BUT when I run the Setup Wizard, the printer is not listed in the window "select the device".

  When I do 'add devices by IP' and enter the IP, I get a message saying that it could not connect to the printer.

  I can print from my XP and Vista machines.  The XP machine is a virtual machine on VMWare Fusion on my MBP.  So I now transfer that I want to print my XP VM just to print it.  Is NOT IDEAL, but that market.  Hoping to solve this problem.

  1. I try to downgrade the firmware to the previous version.  Is anyway to do this?  How can I get the previous version of firmware?

  2. I would like to know what ports are used to connect to the printer?  If anyone can let me know, I'll see if my MBP has those blocked or not.

  3. If anyone can offer a solution, I would appreciated it.

  OK, I finally found this thing.  What happened was that my wireless connection does not (for reasons unknown at this point) my Mac to connect to the printer.  Even if I can get to the Web page.  Hello may not cross.

  Anyway, on a whim, I disabled the airport and used an ethernet cable to connect to the same switch the 6500 was conducting and reinstalled the software.  And whaddaya know.  I was able to install the printer, then did a scan and printing and a jig around the room.

  I disconnected the cable and turn on the wireless connection, once again, and wouldn't you know, HP Scan Pro can not connect to the 6500.  Is returned to the thread and it works.  Hmmm.

  I am due for an in new wireless access point.  The DLink and my Verizon FIOS Actiontec router sometimes do strange things.

  I'll still give you, PrintDoc, 1 kudo for loans to help.  And the uninstalling of 3 keys; It was new to me.

  I may be the only one who has never fallen on this, but it may be useful to say, do NOT take your connection Wireless for granted.  Always test everything.

  Thank you

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• ERRO 'bad gateway entered' after firmware upgrade BEFSR41

  I have updated the firmware on my router Linksys BEFSR41 V4.3. On this router I used Statis IP (if DHCP active). It worked well on my network, until this upgrade. Now when I try to ad another static IP address, or when I want to change something in the Routing tab, I get this message " bad gateway entry! It should be the same WAN IP subnet "." Strange because I have not changed anything in the settings.
  I did a full reset on the router, still the same problem.

  Any suggestions?

  Enable the DHCP server on the BEF. That's all. There is no need of any static routes in this configuration.

  If you enable the DHCP server, either change these static IP 192.168.1.100 etc. for addresses outside the server DHCP address pool (default 192.168.1.100 - 149) or adjust the DHCP server address pool, for example to change IP address of 192.168.1.100 DHCP start 192.168.1.10 or 192.168.1.200 or whatever you want. The important thing is that static IP addresses are not inside the DHCP server address pool.

• USC fails to load after firmware upgrade on PET310

  A former T310 with Perc 6i (not LCD, no iDRAC LAN port) had USC worm. 1.3.0.40. I could not install w2012, so I tried to update the firmware of the USC. I installed the USC worm 1.5.0.29_A00 successfully (twice already), downloaded from DELL by the label of the Server Service.

  After the reboot, choose System Services, USC can not finish loading, only to wait with the message on the screen: entering the System Services... Starting unified Server Configurator.

  In the LOG I found the new pair of messages after FW update: ROMB battery: charge detector, falied emerged. / Sensor batterery, has not been Desassertion.

  What can I do now? Where to download the older FW USC of?

  Hello

  It seems that 1.5.5.18 is the last USC for T310s without an express iDRAC. I would try to install it:

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=YV2KT

  Thank you