Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

Similar Questions

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Satellite L40 - 18W PSL4CE - while charging the Touchpad doesn't work does not correctly

  Hi all..

  I'm on Toshiba Satellite L40-18W-PSL4CE model 00H0000GAR...
  Recently, my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter...
  My touchpad does not work correctly...
  That is to say... If I work with baterry the touchpad works very well... If I connect to the AC adapter the touchpad works not properly but the external pout works well.

  Please help me...
  Thanks in advance...

  > Recently my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter my touchpad is not working properly...

  Using the power adapter Toshiba original and recommended?
  In my opinion, the issues could be linked to the new Ac adapter and may happens with an adapter not entirely comatibel AC

• touchpad doesn't work does not correctly

  I HP Pavilion 15-n003tx Notebook PC (ENERGY STAR touchpad does not work properly when I tried to zoom in or zoom out then it doesnot occurs I have the latest drivers installed please help thanks)

  Hi @Mandeep2000 ,

  Thank you for your request, I will do my best to help you!

  I understand that your touchpad is not working properly, because you can't use the zoom.  You have the latest driver installed.

  Did you run The HP Support Assistant to help with the updates from HP and solve problems?

  Have you tried using automated troubleshooting (Windows 8) to help overcome this difficulty.

  Here is a link for the use and troubleshooting of the TouchPad and ClickPad (Windows 8) which can also be beneficial.

  Have you tried to delete the driver and put it back?

  Please let me know the results.

• ALPS Touchpad doesn't work does not correctly under Windows 7

  I have a Dell laptop with a touchpad Alps. I recently installed windows 7 and now the touch pad scroll feature does not work. I tried to re install the drivers, but windows gives me an error message indicating that there is a conflict. How can I get the touchpad to scroll again using Windows 7?

  Hello

  Is this by chance a Vostro laptop?

  If so, there's already a long thread about this in another forum: http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/cf9bc301-e3c2-4c5b-b9cd-9eab8582f45f.

  Currently, there is no work around.  When I put in information about this problem, I'll post in the thread above.

  Thank you
  Mark you want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Touch Pad doesn't work does not correctly? HP-Envy-15Q004TX

  Hello
  It is the first HP product I've ever owned, I'm pretty happy with the laptop, outside of windows 8.1 However, is not the concern of this post. My mouse pad stops working when I press a key, as in if I press 'W', while trying to move the mouse on the screen then followed mouse stops. So it is impossibe to play all kinds of games and making it really difficult to do anything else and it's just embarrassing. The only button that does not affect this is the key of the SIFT.

  I have no idea what to do, y at - it a setting or something like that or I'm just miserable?

  Thank you

  puffm wrote:

  Hello
  It is the first HP product I've ever owned, I'm pretty happy with the laptop, outside of windows 8.1 However, is not the concern of this post. My mouse pad stops working when I press a key, as in if I press 'W', while trying to move the mouse on the screen then followed mouse stops. So it is impossibe to play all kinds of games and making it really difficult to do anything else and it's just embarrassing. The only button that does not affect this is the key of the SIFT.

  I have no idea what to do, y at - it a setting or something like that or I'm just miserable?

  Thank you

  Hello

  Try to disable the check of Palm, this might help you: Touchpad PalmCheck - turn on or off in Windows

  Thank you

• Tab doesn't work does not correctly for Datagrid ComboBox ItemEditor

  When you run the app type a1 in the discovery of an App combo box and then type the tab key.

  Click the 3rd row in the column as Bs and show a combobox.

  Type a3 and her and then press ENTER.  Note that the A3 is saved under the selected and recorded on the dataprovider element

  Press the return key back key and press ENTER.  Note that the null value is saved and that nothing is selected.

  Type a3 again and press ENTER.

  Hit of the new backspce, but this time typing the tab key.  Note that the previous value is returned.  Oops.

  {Code}

  <? XML version = "1.0" encoding = "utf-8"? >

  "" < s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  xmlns:vo = "valueObjects.*".

  Width = "100%" height = "100%" >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  Import mx.events.FlexEvent;

  protected function aCBLabel(item:Object):String

  {

  If (item! = null)

  Return item.name;

  on the other

  Return ' ';

  }

  protected function bDG_creationCompleteHandler(event:FlexEvent):void

  {

  bDG.selectedIndex = 0;

  }

  protected function bAFormat(item:Object,_column:DataGridColumn):String

  {

  If (item [column.dataField]! = null)

  return item [column.dataField] .name;

  on the other

  Return ' ';

  }

  []] >

  < / fx:Script >

  < fx:Declarations >

  < vo: ADto id = "aDto" / >

  < vo: BDto id = "bDto" / >

  < s:ArrayCollection id = "aList" >

  < vo: ADto >

  < vo: id > 1 < / vo: id >

  < name: vo > a1 < / vo: name >

  < vo: bs >

  < vo: BDto >

  < vo: id > 1 < / vo: id >

  < vo: aDto >

  < vo: ADto >

  < vo: id > 1 < / vo: id >

  < name: vo > a1 < / vo: name >

  < / vo: ADto >

  < / vo: aDto >

  < / vo: BDto >

  < vo: BDto >

  < vo: id > 2 < / vo: id >

  < vo: aDto >

  < vo: ADto >

  < vo: id > 2 < / vo: id >

  A2 < vo: name > < / vo: name >

  < / vo: ADto >

  < / vo: aDto >

  < / vo: BDto >

  < vo: BDto >

  < vo: id > 0 < / vo: id >

  < / vo: BDto >

  < / vo: bs >

  < / vo: ADto >

  < vo: ADto >

  < vo: id > 2 < / vo: id >

  A2 < vo: name > < / vo: name >

  < vo: bs >

  < vo: BDto >

  < vo: id > 3 < / vo: id >

  < vo: aDto >

  < vo: ADto >

  < vo: id > 3 < / vo: id >

  < name: vo > a3 < / vo: name >

  < / vo: ADto >

  < / vo: aDto >

  < / vo: BDto >

  < vo: BDto >

  < vo: id > 0 < / vo: id >

  < / vo: BDto >

  < / vo: bs >

  < / vo: ADto >

  < / s:ArrayCollection >

  < s:ArrayCollection id = "Ballista" >

  < vo: ADto >

  < vo: id > 1 < / vo: id >

  < name: vo > a1 < / vo: name >

  < / vo: ADto >

  < vo: ADto >

  < vo: id > 2 < / vo: id >

  A2 < vo: name > < / vo: name >

  < / vo: ADto >

  < vo: ADto >

  < vo: id > 3 < / vo: id >

  < name: vo > a3 < / vo: name >

  < / vo: ADto >

  < / s:ArrayCollection >

  < / fx:Declarations >

  < source = fx:Binding "aCB.selectedItem as ADto" destination = "aDto" / > "

  < s:Form id = "AForm" width = "700" height = "170" >

  < s:layout >

  < s:BasicLayout / >

  < / s:layout >

  < s:HGroup x = "0" y = "50" width = "670" height = "60" >

  < s:Label height = "25" fontWeight = "bold" = "find a" verticalAlign = "middle" / >

  < s:ComboBox id = "aCB".

  prompt = "enter or select a name.

  labelFunction = "aCBLabel."

  x = "110" y = "10" width = "375" >

  < mx:ArrayCollection id = list "asList" = "{aList}" / >

  < / s:ComboBox >

  < / s:HGroup >

  < / s:Form >

  < mx:DataGrid id = "bDG" x = "10" y = "140" width = "450" height = "200".

  Editable = "true".

  dataProvider = "{aDto.bs}" "

  creationComplete = "bDG_creationCompleteHandler (event)" >

  < mx:columns >

  < mx:DataGridColumn id = "bidDC".

  headerText = "id".

  Editable = "true".

  dataField = "id".

  editorDataField = 'value '.

  Width = "50" / >

  < mx:DataGridColumn id = "bNameDC".

  headerText = "Like Bs"

  Editable = "true".

  dataField = "aDto.

  labelFunction = "bAFormat."

  editorDataField = 'value '.

  Width = "150" >

  < mx:itemEditor >

  < fx:Component >

  < s:MXDataGridItemRenderer implements = "mx.managers.IFocusManagerComponent" >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  Import mx.controls.dataGridClasses.DataGridListData;

  Import mx.controls.listClasses.BaseListData;

  Import mx.events.FlexEvent;

  Import spark.events.DropDownEvent;

  Import spark.events.IndexChangeEvent;

  [Bindable]

  public var down: ArrayCollection;

  protected function cb_InitializeHandler(event:FlexEvent):void

  {

  Low = outerDocument.bAList;

  aDto = outerDocument.bDG.selectedItem.aDto;

  If (aDto! = null)

  {

  var t:ADto;

  for (var i: int = 0; i < bAs.length; i ++)

  {

  t = low [i];

  If (aDto.id is t.id)

  {

  cb.selectedIndex = i;

  break;

  }

  }

  }

  }

  override public function setFocus (): void

  {

  cb.setFocus ();

  }

  public function get value (): ADto

  {

  If (cb.isDropDownOpen)

  cb.closeDropDown (true);

  cb.validateNow ();

  aDto = cb.selectedItem as ADto;

  return aDto

  }

  protected function cb_closeHandler(event:DropDownEvent):void

  {

  aDto = cb.selectedItem as ADto;

  }

  []] >

  < / fx:Script >

  < fx:Declarations >

  < vo: ADto id = "aDto" / >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < s:ComboBox id = "cb".

  Width = '100% '.

  prompt = "{aDto.Name}" "

  dataProvider = "low" {} ".

  labelField = 'name '.

  Initialize = "cb_InitializeHandler (Event)" "

  Close = "cb_closeHandler (Event)" >

  < / s:ComboBox >

  < / s:MXDataGridItemRenderer >

  < / fx:Component >

  < / mx:itemEditor >

  < / mx:DataGridColumn >

  < / mx:columns >

  < / mx:DataGrid >

  < / s:Application >

  {Code}

  {Code}

  package valueObjects

  {

  import com.adobe.fiber.services.IFiberManagingService;

  import com.adobe.fiber.valueobjects.IValueObject;

  Import mx.collections.ArrayCollection;

  Import valueObjects.BDto;

  import com.adobe.fiber.core.model_internal;

  Using namespace model_internal;

  public class com.adobe.fiber.valueobjects.IValueObject implements ADto

  {

  private var _internal_id: int;

  private var _internal_name: String;

  private var _internal_bs: ArrayCollection collection;

  model_internal var _internal_bs_leaf:valueObjects.BDto;

  public void ADto()

  {

  }

  public function get id(): int

  {

  Return _internal_id;

  }

  public function get name(): String

  {

  Return _internal_name;

  }

  public function get bs(): ArrayCollection collection

  {

  Return _internal_bs;

  }

  public function set id(value:int): void

  {

  var oldValue:int = _internal_id;

  If (oldValue! == value)

  {

  _internal_id = value;

  }

  }

  public function set name(value:String): void

  {

  var oldValue:String = _internal_name;

  If (oldValue! == value)

  {

  _internal_name = value;

  }

  }

  public function set bs(value:*): void

  {

  var oldValue:ArrayCollection = _internal_bs;

  If (oldValue! == value)

  {

  If (value is ArrayCollection collection)

  {

  _internal_bs = value;

  }

  else if (value is table)

  {

  _internal_bs = new ArrayCollection (value);

  }

  else if (value == null)

  {

  _internal_bs = null;

  }

  on the other

  {

  throw new Error ("value of bs should be a collection");

  }

  }

  }

  private var _managingService:com.adobe.fiber.services.IFiberManagingService;

  public function set managingService(managingService:com.adobe.fiber.services.IFiberManagi_ngService):void

  {

  _managingService = managingService;

  }

  }

  }

  {Code}

  {Code}

  package valueObjects

  {

  import com.adobe.fiber.core.model_internal;

  import com.adobe.fiber.services.IFiberManagingService;

  import com.adobe.fiber.valueobjects.IValueObject;

  Import valueObjects.ADto;

  Import mx.collections.ArrayCollection;

  Using namespace model_internal;

  public class com.adobe.fiber.valueobjects.IValueObject implements BDto

  {

  private var _internal_id: int;

  private var _internal_aDto: ADto;

  private static var emptyArray:Array = new Array();

  public void BDto()

  {

  _internal_id = 0;

  }

  public function get id(): int

  {

  Return _internal_id;

  }

  public function get aDto(): ADto

  {

  Return _internal_aDto;

  }

  public function set id(value:int): void

  {

  var oldValue:int = _internal_id;

  If (oldValue! == value)

  {

  _internal_id = value;

  }

  }

  public function set aDto(value:ADto): void

  {

  var oldValue:ADto = _internal_aDto;

  If (oldValue! == value)

  {

  _internal_aDto = value;

  }

  }

  private var _managingService:com.adobe.fiber.services.IFiberManagingService;

  public function set managingService(managingService:com.adobe.fiber.services.IFiberManagi_ngService):void

  {

  _managingService = managingService;

  }

  }

  }

  {Code}

  the tab wasn't working because because he wasn't changing the selection and just leave the drop-down list box.  For example, in the value of the Add function if (cb.textInput.text == "") cb.selectedIndex = - 1;  This will change the selection as you wish and solve the problem.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• \n doesn't work does not correctly

  Hello fellow Scripting Guys - it's probably something really basic, and it of really something minor but would be appreciated if someone could look in and explain why the \n does not work properly.

  I have a code;

  //created by Daryl Smith
  //puts artist name, filename, and date in the top left of the file.
  
    #target illustrator
  
  
    var thisDoc = app.activeDocument;
  
    var filename = app.activeDocument.name.replace(/\.[^\.]+$/, '');
    var createdate = app.activeDocument.modified;
  
    var  theDate = new Date();
          var day = theDate.getDate();
          var month = theDate.getMonth() + 1;
          var year = theDate.getFullYear();
          var hours = theDate.getHours();
          var min = theDate.getMinutes();
              if (min < 10)
                  min = ("0" + min);
          var morn;
              if (hours >= 12)
                  {
                      hours = hours-12;
                      morn = " PM";
                  }
              else
                  morn = " AM"
  
  var saveDate = (month + "-" + day + "-" + year + "    " + hours + ":" + min + morn );
  
  
    var nameTextFrame = thisDoc.textFrames.add();
      nameTextFrame.contents = globalartistname + "\n" + filename + "\n" + saveDate; 
      nameTextFrame.filled = true;
      nameTextFrame.alignment = "center";
     
     
     var thisdoc = app.activeDocument; 
     var hasDocCoords = app.coordinateSystem == CoordinateSystem.ARTBOARDCOORDINATESYSTEM;
         
         
          var p = thisdoc.pageItems; 
          for (var i = 0, l = p.length; i < l; i++) { 
              var pID = p[i]; 
              if (pID.guides == true) { 
                  var guideBox = pID 
              } 
          }  
          var wNum = guideBox.width; 
          var hNum = guideBox.height;
         
          var tboxw = nameTextFrame.width;
          var tboxh = nameTextFrame.height;
         
          var xOffset = (wNum/2);
          var yOffset = (hNum/2);
         
         
          var xNum = guideBox.position[0]+xOffset-tboxw-50; 
          var yNum = guideBox.position[1] + tboxh + 80 ;
         
  
     
      nameTextFrame.position = [xNum,yNum]
    
  
  

  I run my use of pallets;

  var putname = new File("S:/Art/ArtDept/Illustrator JS Palette/Scripts/Art Share Server/Construct/filenameonart.jsx");
  miscgroup.add ("iconbutton", undefined, ScriptUI.newImage (miscputnameIcon.a, miscputnameIcon.b, miscputnameIcon.c, miscputnameIcon.d),{style:"toolbutton"});
  
  

  Zantcor wrote:

  The script works correctly when I run the script directly but does not work when I run it from the pallet.

  Simply by using the following, given your case to have only one line seems to work very well. Directly and when loaded via BT, it seems to work fine as long as you have planned in my simplified test configuration.

  nameTextFrame.contents = decodeURI(globalartistname + "%0d" + filename + "%0d" + saveDate);
  

• Hover effect doesn't work does not correctly

  Hello

  I was working on a project of Muse and I added the rollover effects, but in a single page, it shows how I want (Portfolio) and in the other, it does not show how I want (client: LOL ESMTG). Why is this happening? I want to add the hover effect that transforms the object to the orange on the page that I just can't do it. What I am doing wrong? How can I fix it to look like I want?

  Please help me as soon as POSSIBLE. This a really urgent project!

  Thank you.

  Miguel Santana

  I think you can still consider this a third-party application, as it was not part or set developed by Adobe Muse.

  I guess you could contact Joseph Angelo Todaro , the developer of this application.

• Open/Save dialogs doesn't work does not correctly.

  Environment: CS6 (PS 13.0.1) Mac OS X 10.7.5. A lot of material. (Usually starting with. CR2 RAW.)

  Two problems open/save

  Recently (perhaps since the 13.0.1 update?), I have had problems with it open and save as dialog boxes.

  First of all. The dialog box open the file by default always to activate: white (i.e. any type of active file). Whenever I go at the bottom of the drop-down list, then select "Documents readable by all the" before I can open ANY type of file. I searched in everyway I can think about looking for a method to have OPEN by default to "all readable" but can't find anyway to do. Does anyone have a suggestion? I admit that it is a nuisance more than anything, but when autour whisk to stop every time and make this change due date is irritating. No other program has this problem (including Illustrator and InDesign). PS5.5 does not show this problem on the same machine.

  In the second place. When I save under and try to select any file format, for example going from psd to TIFF, the drop-down list format ALWAYS selects the format above whom I choose. Example: If I choose JPEG, PS tries to save as .iff. If I pull the selection down to JPEG2000 it will then save standard JPEG. Yet once just an irritating but, tiff (which I need for several other programs) is the last on the list so there is no way I can go one below for the tiff format. It always comes out in png. Also note that the selection of the Format shows the correct format - in the case of tiff, the dialog box displays TIFF selected, but the program is apending .png. (Continuing save it as (without altering my selection) always leads to the wrong shape no matter what the dialog box said Format in the Save as operation.) Yet once, no other program that I work with (including several Adobe products) exhibits this behavior.

  Seriously, I need to be able to save as a tiff. Anyone with any ideas on that?

  Thank you very much

  Robert

  Look at help-> system information.

  If you see the Adobe plug-ins in the list not required, you have made a mistake.

  If you set the optional plugins preference folder to point to an earlier version of Photoshop: you made a mistake.

  Somewhere you duplicated formats of files, most likely from a previous version of Photoshop.

  You must get rid of these files duplicate and all the plugins Adobe formats you copied by mistake from a previous version.

  Reinstall will not change your preferences, or plugins that you copied by mistake.

  It would be only to reinstall bits which are provided with CS6 - which are not a problem.