Junk mail filters don't seem to work

Similar Questions

• Firefox is already running but is not responding? Simple answers don't seem to work

  I started Firefox earlier today and received a message about a problem with Firefox and he had to be reset. Because the other option seemed worse than the reset, and Firefox Reseting seemed relatively painless, I clicked OK. A short message popped up on the registration of passwords, bookmarks, etc. with success. Then a small window pops up, saying it was cleaning of Firefox. While the process seemed to freeze. I liquidated it, killed at any process of firefox running and attempted to restart Firefox, when I received the message "Firefox is already running, but does not." There is a folder on my desktop labeled 'old Firefox data' which I assume is from Firefox reset (it is also now a copy of the profile on my desk, just in case).

  https://support.Mozilla.org/en-us/KB/Firefox-already-running-not-responding

  I found this and tried to work through it, but it doesn't seem to help.

  (1) Ther' are no Firefox.exe in my task manager, nor is there a process plugin-container.

  (2) I deleted the file "parent.lock" in both the profile (which is just a bunch of jumbled letters and numbers with 'default' in it) and the record of the old Firefox. However, these files were just "parent.lock" not "parent.lock.parentlock".

  (3) did not change the name on it, so unless the reset did before she locked herself, I don't know what to change it to.

  (4) it is not a file share, so...

  (5) this could be a possibility. The folder of Firefox that my profile is 'Read only' is, but I can't not to change cela. Everytime I go in, turn off the 'Read only' option and tell him to propagate the change through subfolders, it seems to work, but when I check the properties 10 seconds later, 'Read Only' is checked again.

  Sounds that the profiles.ini was corrupted when you remove the old default profile and adding the new profile.

  • http://KB.mozillazine.org/profiles.ini_file

  You can have security software that preventing to change the Firefox file.

  You use the Profile Manager to restore an existing profile or create a new profile.

  A "Reset" creates a new default profile with a timestamp attached and is trying to import some settings of the old profile, leaving the old profile intact, including the (invalid) cache folder (topic: cache) can take up to 1 GB.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Versions of Firefox 15 + will move the old profile folder "old Firefox Data-#" folder on the desktop that gets a figure if you use reset several times, so you can no longer use the Profile Manager to return to the old profile.

  See also:

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Possible bug, Bilinear filtering doesn't seem to work...

  Bilinear filtering benefits? I can make only the nearest textures sampled, dare I change

  float4 color = sample (diffuseMap, float2 (interpolatedCoord.x, interpolatedCoord.y), PB3D_NEAREST);

  TO

  float4 color = sample (diffuseMap, float2 (interpolatedCoord.x, interpolatedCoord.y), PB3D_LINEAR);

  nothing is out! Is it still to be supported? It's something so fundamental and important, it's weird that he is not currently working...

  For beginners to 3d: Bilinear filtering interpolates via GPU pixel in a texture to make it look decent and not something off DOOM in 1993 ;-)

  Also: support for more advanced Molehill\PixelBender3D of texture filters will be like those anisotropic?

  I'm sorry for the late reply to this. At present, there is no way to make the work of Bilinear filtering. It has been added to our database of bugs and will set us

  it.

  Bob

• Desktop HP Pavilion HPE h8 - 1360t - internal speakers don't seem to work?

  I just got the HP Pavilion HPE h8 desktop PC - 1360t (w / beats audio) and there is no sound (for example, no sound system at boot). External speakers work fine as does a helmet. Is not internal speakers.

  Thank you

  Nolaborn

  Hi Nolaborn,

  The Tower has no internal speakers.

  Best regards

  DP - K

• Zip files don't seem to work, using windows 7?

  I am using windows 7 and you need to send my assessment United in a compressed zip folder.

  I'll add pictures of what I'm doing and what's happening.

  (1) I rely on compressed (zipped) folder.

  (2) then it looks like what I think not what its supposed to look like?

  

  (3) then when I try to open it to see if its working it comes up with this message...

  

  Help please! my deadline is close!

  Thank you!!

  RM

  If you look in the error, it says application not found.  what you are trying to open with does not exist or is corrupt.  I see that you have winrar so first I would be "associate" winrar opens "zip" files, and if it does not reinstall winrar.

• I have a Galaxy Note 4 - try to load Thunderbird mail but don't seem to do, help!

  Low app loaded but can't find it on my phone

  Ago ins't Thunderbird for Android.

• Junk e-mail filtering, continues after activate spam filtering is unchecked.

  I don't want E-mail on El Capitan to filter all mail to the junk e-mail folder. I unchecked enable mail junk filtering. I restarted Mail since unchecking filtering. I rebooted since unchecking filtering. As he did when the checked enable spam filtering, spam filtering continues. The only difference is that it allows garbage by now and does not mark as spam. He only filter emails at random junk from previous senders. Move the emails filtered from previous senders in the Inbox do not form the filter to allow this sender. Rules do not affect filtering of spam. For some shippers, I kept adding rules saying mail to the sender mail in the Inbox has never worked. Send these shippers go always undesirable.

  Junk mail filtering was overall a failure, so I want to turn it off. How can I disable junk mail so that it is actually not filtering?

  Thank you

  James

  What email provider is the associated e-mail account? They have their own filtering.

  iCloud separate filtering on the Web site.

  Gmail offers a separate Web site filtering.

  One of these could explain why messages are moved to the junk e-mail folder, but not labeled as junk mail.

• Is not junk e-mail filtering. I get double messages

  Is not junk e-mail filtering.  I also get double messages.  It's a mess!

  The following Support from Apple about iCloud Mail can be useful:

  Identify and filter junk e-mail in iCloud - Apple Support

  iCloud: manage junk e-mail

  For general mail adverse treatment suggestions, please read for Mac Mail: If junk mail filters do not work properly.

• mark multiple records as junk mail folders

  I know that in the past, I had the possibility to mark several files as "undesirable." I think remember me this well, which is an extension, but I don't remember that one.

  I use this because I use at least four folders iMAP as unwanted mail files. One where my mailer backend (spamassassin) puts all the MAILS, two where I put all the MAILS uncaught (which gets reported by using reporting SPAMassassin). And where I put several samples of 'persistent' anti-SPAM to see if I can write more specific rules for SpamAssassin or mailer settings to block/filter those.

  I have two questions to this using the regular configuration of Thunderbird:

  • When accessing one of the other SPAM folders, thunderbird think it should run the junk mail filters on them and everything is moved.
  • I want to have all of these files together. When 1 single folder is marked as spam, CT will be lift it up at the front.

  Maybe you were using one of these parts of the addon:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/FolderFlags/
  • https://addons.Mozilla.org/en-us/Thunderbird/addon/JunQuilla/

• Junk mail will not go into the junk e-mail folder

  I go through my mail labelling I know is a spam, junk e-mail.  The next day I received the e-mail from the same place and it comes right to my Inbox.  I try to score with a ruler, but she always ends up in my Inbox.  How can I keep this shit spam from my Inbox?

  Hello rubynrse,

  Thank you for using communities of Apple Support.

  If I understand your message that junk mail filters do not work as expected.  To help solve this problem, please follow the information in the article to support related to below.

  Address postal (Yosemite): If junk mail filters do not work properly

  Take care.

• I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him. However, the phone doesn't seem to work. Also I don't have apple care more.

  I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him an Apple store. However, the phone doesn't seem to work. Also I don't have apple care more.

  You will pay full price for a new iPhone.

  Apple Care does not damage water still > liquid for iPhone or iPod is not covered by the warranty - Apple support

• Portege R830: don't seem to be able to get the fingerprint reader to work

  HI - need help.

  I have a Toshiba R830 I got "downgrade" to Windows 7 32 bit version pre-installed 64-bit. Long story - but it's the software compatibility.

  Despite the download and the installation of what I think is all the relvant 32 drivers - I don't seem to be able to get the fingerprint reader to work.

  I downloaded and installed the software fp-sw-201103311304 Tosh - chilled out and tried to install it.

  It's actually hard to know if it is installed! I get a window telling me it will extract the file in a directory C:\temp and tells me at the same time that 'tinstallwb.exe' will start once the extraction is complete.

  It seems to extract - but I do not see that the installation is happening.

  Subsequently it is has that nothing listed in the title of the programs - and nothing "launches."

  In Device Manager - I can't see anything that is listed as "fingerprint reader" under security features - the list is TPM 1.2. Not actually sure that is nothing to do with the fingerprint reader - well I've enabled and then disabled via the BIOS.

  Am I missing something?
  Could the reader [which I have not used since the new - even if it's only 8 weeks] have stopped working?

  Would be very grateful for pointers.

  Try to start the installation manually. On the desktop create a folder unpack and after doing the beginning downloaded exe. Extract the files to the folder unpack and disable command run after extraction.

  When files are checked almost open and Toshiba archive extracted file extractor. You will find setup.exe.
  Try please to start it manually.

• my hp 940c seems to work ok on my new hp p7 1010 but I don't have desktop toolkit

  I just purchased a p7-1010PC HP and connected my HP deskjet 940c. It seems to work ok, but I noticed that I don't have the desktop icons for the printer and the Toolbox I had on my other HP computer. Should I reinstall with the disc that came with the printer?

  Hello

  Yes there is no Toolbox for your device in Win7.  I searched through the manual online and did not see a button for cartridges align from the buttons on the front panel.  I don't see a solution for you in there.  the link I sent you says something similar.

  In my view, that a procedure Align cartridges is performed automatically when you insert a new cartridge, so that might be another way to trigger an align cartridge.

  -goes211

• Is there a way to calm the junk e-mail filtering. any screen printing in the body of the e-mail shots intospam

  Is there a way to calm the junk e-mail filtering.

  Silkscreen or any object in the photo in the body of the e-mail begins the email in spam, even if it comes from an authorized sender.

  "Discarded looked like spam or contain a virus."

  Hey mwbaumannmo!

  Unfortunately, no there is not a way to lower the settings of spam filter. My suggestion would be to try to send the image as an attachment and see if it will then print.

  I hope this helps!

• They sent me a serial number for a windows version of PS Elements when I ordered a mac version.  The serial number does not work, it is not surprising, but they don' t seem to care.  I tried the online chat and have been waiting for almost a day unanswere

  They sent me a serial number for a windows version of PS Elements when I ordered a mac version.  The serial number does not work, it is not surprising, but they don' t seem to care.  I tried the online chat and have been waiting for almost a day unanswered.  What should I do?

  Look here

  Product order | Platform, language Exchange