just a spark of life and then nothing

Similar Questions

• When I click check updates I don't get a message just the icon of thought and then nothing

  I have version 1.0.1 and I want to improve. The reason why I did not yet is because I recently bought second hand phone. But I'm unable to update and what's happening is the circular icon indicating that something is happening shows upward, then disappears and there is no message was updated. If I can't update, is there another way to upgrade the browser because I can't use it properly at the moment.
  Thank you

  Something is lost in translation. Unzip the package. Copy the zip (inside the folder that you have just unpacked) file to the root of the SD card, renaming it "update.zip". Then apply by starting the phone into recovery by now the volume switch mode up everything with power.

• Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first go-ahead for colid quickly followed by the longest fixed Orange, which turns off and then nothing? He's dead now?

  Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  Thank you

  Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  He died... the fact that the main witness turns off is unusual in this model.

  It is common to the next... A1409 (gen4)

  What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...

  See s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.

  I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.

  If you want to play, I'm happy to help you... but I would not spend money on it.

• I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall

  Have what troubleshooting you done?  Surely you have tried something before posting here, Yes?

  Hold power and home until is buttons restarts.

• When I go to install Windows 10 the blue window appears and then nothing more - the store of data error code 0 x 80070057

  Original title: when I go to install Windows 10 the blue window appears and then nothing

  When I update my system to Windows 7 home premium Windows 10 blue box appears and then noting. I tried Windows update troubleshooting and RC Datastore error code 0 x 80070057. Any help with this would be great. Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you are trying to install Windows 10 and nothing happens and I'll be happy to answer your query. I appreciate your efforts to try to solve your problem and help you with the following additional steps that will help you diagnose and fix the problem.

  Method 1: Error code 0 x 80070057, thank you suggest follow the steps described in the following link and check if the problem persists.

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  Method 2: If method 1 does not work, try to follow all the steps in the following link and get the fixed number. These steps also include when you rename a file, called pending. XML as a method 11, which will prevent your system from the error: «failed to Setup updates windows.» Changes in return ".

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: Please restart all the Windows update services that were stopped during the troubleshooting as indicated in the link above.

  Try the following steps and after return your results for further assistance, we will be happy to help you.

• Photoshop elements on Windows 10 12.0 ask constantly for registration and then nothing happens

  PES 12, I installed on a windows 10, the software has been activated on an old computer (only once, so another installation should be possible). When I try to start the program, I get a dialog box asking for registration within 7 days, or that the software will stop working. I follow instructions, use my Adobe ID, accept the terms, and then - nothing happens. I didn't even get an error message. PSE does not start. If I click on it again, the same thing happens. Does anyone have an idea how I can fix this? Please?

  Nikolas

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• my laptop don't fully Hibernate. He seems to come back to life and then eventually overheating in t

  Hello

  My vaio P ultrabook does not entirely seem to Hibernate.  He comes back to life and then overheating in the case.  What should do?

  Thank you

  HT

  htrim wrote:

  Hello

  My vaio P ultrabook does not entirely seem to Hibernate.  He comes back to life and then overheating in the case.  What should do?

  Thank you

  HT

  Don't know how to set hourly Hibernate in your power option.  Default (hibernation to 1440 minutes or 24 hours), your Vaio is in mode "Eve" than after 24 hours before changing mode Hinernate.

  During standby mode, your technology Intel Smart Connect, if activated (default is on) are going to wake up periodically to check the email and messages as your smartphone or tablet so that they are already on your machine when you exit sleep next time. Especially when there are large files to download, the kick-off of the fan, can consume the battery, and so your machine can become hot.

  You can disable it in Vaio Control Center > battery & > Intel Smart Connect technology.

• I loaded LR CC and open it Flash the Welcome screen and then NOTHING. Uninstalled and reloaded and same thing happen.

  I loaded LR CC and open it Flash the Welcome screen and then NOTHING. Uninstalled and reloaded and same thing happen. ! !

  CC applications close immediately after the launch

• Used for Adobe Pro XI, after download download manager a screen asked the English language, said yes and then nothing, no installation... help Windows 7 x 64

  Used for Adobe Pro XI, after download download manager a screen asked the English language, said yes and then nothing, no installation... help Windows 7 x 64

  Hi nucar,.

  Once Adobe Download Assistant is installed, you can start at any time and choose a product to download at the bottom of the window. Updates list as new products will be available for download with Adobe Download Assistant.

  Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do _ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_

  Otherwise you can try to download from direct download links available at: download Acrobat products | Standard, Pro | XI, X

  Kind regards

  Rave

• BSOD would be and then nothing

  Hello. I was running a game in my computer when they suddenly BSOD, close the game and has blurred the image on the screen. I waited outside in the hope that he would return to normal. When he failed, I stop the PC by pressing the power button. When I tried to open it again, after the startup of Microsoft Vista, all progress bar I got was a blank screen with only the pointer from the list. On the next reboot, once again by closing the power button, I got an error message "0xc0000006 (0x754cebf6 0x0088f0dc)", asking / invites me to insert the startup disk in the appropriate drive, and then press any key. All I can do is check the CMOS Setup and nothing else. I currently don't do anything fearing that it might further complicate the problem.

  BTW, I used a Vista Enterprise edition. Thank you!

  If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.

  Please provide the following information:

  -Zip please the contents of the directory C:\Windows\Minidump

  -Transfer to the public area of a SkyDrive (https://skydrive.live.com) account

  -Post a link here so we can download it.

  and

  -Go to start and type "msinfo32" and press enter

  -When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.

  -Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field

  -Post a link here so we can download it.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Use SkyDrive to upload collected files:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Instructions courtesy of http://www.carrona.org/
  And http://sysnative.com
  More reading both.

• Everyone is having a problem with only being able to do a Google search and then nothing after that. I have to close the browser and reopen it to each search

  Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Windows XP Home edition does not charge up - screen Toshiba and then nothing

  I opened my computer to stand by earlier. And received an error message such as:

  WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
  Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

  I also tried to "last good configuration" but who also refuses to load.
  I can, however, in the BIOS.

  The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.

  I have a P100-429 Satilite using XP SP2 (or 3) does not remember.

  Is this a hardware problem? I lose data?

  I am aware that my system was clean and I was using a good anti-virus.

  Please please let me know if you have any suggestions or comments.

  Thanks in advance, Max...

  Hi RisSsky,

  you are in a deep deep sh... t... No. not really...
  Looks like the filestructure hard disk is damaged.
  the hard drive is recognized by the bios? means, it is listed as a device?
  There is a sound of the hard drive? scratch or buzzing or ticking?

  CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.

  don't panik, we will do things.

  2 options to solve this problem:
  the first and save:
  -Remove the old hdd (you need later)
  -get a new hard drive and make a recovery/installation on the new drive.
  -also get a usb - hdd connector to access old data hdd and copy on the new disk.
  or the 2nd:
  -run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
  Be aware that if there is a problem it will get worse...
  -start in safe mode

  If you're lucky, the 2nd option will do.
  as said before I'd do it "the safe way.

• None of my games will start in Windows 7, drive spins and then nothing

  I did a clean install of Windows 7 and tried to play some of my games, both downloaded and those I have records for, but nothing starts.
  I'm running a P4 3gig emachine with 2gig RAM.

  The game installed fine, but when I throw the disk spins then stops and nothing else happens.  I get some error massages and I tried to run in an earlier version and run as administrator. and still nothing.

  I ran SFC scan and it came back without any problem, and I've also updated my drivers and still nothing... Please help before I die of boredom!

  Hello

   

  Check if you are able to run these games when your PC is in a clean boot state.

  1. sign the computer by using an account with administrator rights.

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items.

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note: following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  Now that the computer is in clean boot state, try to play these games and see if you are able to. If the games play, you can follow the steps mentioned in the knowledge base article below to determine which startup item or service could be the cause of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  Post back with the result.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Excerpt from drivers and then nothing

  Hello

  I have a photosmart c4680 (c4600 all-in-one printer).  The disc supplied with the printer has no drivers for my computer which is running windows 7 (64-bit), so I came here to download. Before I download, but a year ago I had to uninstall for one reason or another. I have never been able to download it again. I have download the drivers and double-click the file. He begins to extract and goes to 100%, but then nothing. Some help would be wonderful.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
  http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

  Kind regards
  Shlomi

• Click next to start installation, and then nothing happens

  Bought 11 Acrobat from Best Buy a few months ago and it did not open immediately.  Now, I am trying to install.  Connected to Adobe online, code redemption, received from serial number.  A ran setup.exe from the included CD, serial No. entered and clicked on install. The CD will appear for a few minutes then stops.  Then nothing else happens - installation status remains at zero.  Rebooted a couple of times to try again with the same result.

  Hello

  If you have a problem to install from the CD, you can download setup at the bottom of the link.

  Download Acrobat products | Standard, Pro | DC, XI, X

  Concerning

  Gilles marneffe