Just black and white picture on television when connecting my A100 Sat

Similar Questions

• Satellite Pro A210: Black/White Photo on television when connecting to the s-video port

  When you connect my TV to my laptop using a S/video on my laptop I don't get any color on television.

  I use the Control Center ATI catylist to clone the pc on the TV.
  I have all the settings for brill ect and looks of size but i ' ts only in black and white

  Anyone who wants to help me please

  Cordially Arron

  I had the same problem on my laptop of 7 years and a TV device.
  I connected the laptop to the TV with the s-video-to-scart cable and I did only get a black and white picture on television.

  I thought that there s a problem of software/setting, but I was wrong.
  After hours of research, I discovered that the assignment of the cable pins was not correct and is not compatible with the plug SCART TV.

  I tested about 5 cables and finally among the new generations of s-video cable has been the key.

  In my opinion, you should try some cables.

  Good luck

• Cannot print just black and white - cannot print all black when a low cartridge

  I had this 6700 Officejet just long enough the warranty has expired. Go figure. I have 2 problems.

  1. from my PC, it will print not just black and white, even if I chose "printing black and white only. I have to go through the whole syetem of dialogue ect ect, which is delayed. It prints perfectly just black and white of my portable Macbok.

  2. it won't let me print a document all in black and white, because I have a low color cartridge. Whey do I have to have color cartridges to print just a black and white document. Very annoying and frustrating. I'm almost ready to use as target.

  Hi fpsolutionsllc,

  Welcome to the Forums of HP Support! I understand your frustration and want to enlighten us and also bring some answers to your questions about the ink on your HP OfficeJet 6700 systems.

  1. you are able to go to your printer properties and change your settings for printing in black and white only, without having to change it whenever you want to print something. See the steps listed below:

  * Go to your devices and printers

  * Right-click on your 6700 and select Print Options

  * Select your desired default and press Ok

  2. you cannot print without all cartridges installed because even if printing black and white printer will still use the ink contained in the cartridges of color for maintenance tasks. It takes little ink from all cartridges in the service of the print head and avoid any clogging. To get a better understanding of take a look here: use of inkjet printers ink.

  I've found this useful information here: a 'ink alert' or "Low on ink" Message appears on the computer or the printer control panel

  Thank you

• How can I get my photos from Windows Gallery to view and print in color, not just black and white?

  How can I get my Windows Gallery pictures to view and print in chiputa, not just black and white?

  Hi Petergrossman,

  Welcome to the Microsoft Vista answers Forum!

  I need few details about the question you posted.

  * What are the name and model of the printer?
  * You receive driver updates for your printer through Windows Update?
  * The printer prints the other applications in color?

  In the meantime, try the following steps.
   
  1. try to print the default pictures in Windows Photo Gallery and check if you get a printing color.
   
  2. try to uninstall the printer driver and reinstall it.

  Also check the setting of the color of the printer. Go to printer settings and make sure that you have selected the option to color.

  To print a picture, follow these steps: -.

  If you have a printer connected to your computer, you can make prints of digital photos. The quality of your photos depends on several factors, including the type of printer paper, ink and the settings of the printer of your choice. You can control many of these settings when you print the picture, but keep in mind that the overall quality and resolution of the digital picture you are printing will affect your final result.

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. click on the image you want to print.

  To select more than one picture, hold down the CTRL key while you click the pictures that you want to select.

  3. on the toolbar, click on print and then click on print.

  4. in the print pictures dialog box, select the printer, paper size, qualite quality print, style print and number of copies to print.

  5. When you have finished choosing how you want to print your photos, click Print to start printing.

  Choose printing options follow these steps: -.

  Before you send a print job to the printer, decide if you want to print all or part of the document or Web page. You may, for example, annotate the pages to print or select a part of a document before sending it to the printer.

  Here are common printing tasks to consider:

  1. to print that a hollering part of a document or a file, make a note of the page numbers for each page you want to print.
  2. If you want to print part of a page or a Web page only, select the content to print before printing.
  3. If you want to print a specific page, click anywhere on the page before choosing the print options for the document.
  4. the page that you clicked becomes the current page and you can print it by selecting this option in the print dialog box.

  After deciding what to print, choose how the print copies should look, and then select a printer.
  Use print preview

  To see what the print will look like before you print it, open the document in a program that offers a preview before printing. Print preview is generally located in the file menu of a program. You should be able to get an overview of each page of the document. In some programs, you can choose print in preview mode options and then print directly from the preview. In other programs, you will need to close the preview, change the document or your printer settings and print.

  If you preview or print a document, and it does not appear the way that you intended, you will need to change the document or change your print options. For example, if one part of your document fits on the printed page, you may need to reduce the font size, reduce the margins, or change the page layout and then try to print again.

  Check out these links that talk about how to print a picture using Windows Photo Gallery:

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-picture

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options#section_2

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My black and white pictures turn into color when I open them in photoshop.

  When I open my black and white images that are saved on my computer in photoshop, they turn into color stills.

  The footage was shot on Sony a7s raw format.

  In Camera Raw, click LGV / tab grayscale and check convert to grayscale.

  It will open with a mixture of default, but you can change the brightness of the colors according to your preferences.

  When you are finished, click on open, allowing you to save a new version of the image in a non - raw, tiff, psd or jpg format.

  

• Satellite Pro A210: Black/White Photo on television when connecting via S-video

  Connect my TV to my laptop using a double at the end lead/SVIDEO (then an adapter SCART at the end of the Tv) everything is OK, but I don't get any color on television.

  I use the Control Center ATI catylist to clone the pc on the TV.
  I have all the settings for brill ect and looks of size but i ' ts only in black and white

  Ive noticed in some forum posts that you can make your own but have no success in finding a way (is it true)

  Anyone who wants to help me please

  Cordially Arron

  Why put on the same topic in two different threads?
  I found this first:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128689#128689

  I think you should follow the first thread to avoid some confusion

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• HP psc1317 print a few strips of color on black and white photographs

  Why my HP psc1317 print a few strips of black and white photographs of 'My pictures', but does not work when copy black and white pictures under the process 'copy - black '. ?

  What the cartrdige of color graphic impression is used to give the best resolution.  If you have selected the photographic support black cartrdige will serve not as pigmented black ink is not compatible with the photographic support.

  When you press the black copy button the printer will use black cartridge to print.

  You have probably one or more colors on your color cartridge is not enough.  document here can help the diagnosis.

• Black and white coloring images

  When I try to use shades of black, gray or white all in a black and white picture old colouring, these colors are not displayed. All other colors work very well. Why does this happen?

  I want dark grey concrete, but any gray color I use, it does not appear. Any suggestions?

  Either that or, if you are happy with the rest of the image, make a fool of your layer of the base image, and then select and darken only its white area. Then use this image when you apply your color blending mode. In doing so, you do not compromise your original image.

• ATI Mobility Radeon X 1400 with the problem of the TV, only the black and white photo

  Hello

  When I try to connect my TV to my Dell Inspiron 6400 with ATI Mobility Radeon X 1400 card, all I get is a black and white image. I have tride all the PAL settings.

  What I tried: I connected the s-video with an s-video cable output to my TV s-video connector (composite) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (RGB signal) result: no color image, just black and white of my office.

  I connected the s-video with a s-video SCART cable output to my SCART TV (composite signal) result: no color image, just black and white of my office.

  His is no problem, this workt fine.

  Anyone know how can I get the color on my TV? Is this possible with my s-video cables? What type of signal you send with my Mobility Radeon X 1400 graphics card?

  Kind regards

  Marcel

  
  

• Satellite C660 C660D - Webcam color or black and white?

  Hello

  I was just wondering if the web camera on the Satellite C660/C660D is color or black and white?
  If its color, how can I change the color?

  Thank you.

  Hello

  Of course he came s color.
  It s a common webcam you have just black and white webcam photo?
  In your case I would recommend you the webcam software options.
  Start the camera Assistant software, and in properties, you can find the option called backlight Compensation. Check this option.
  Also in the Image tab, you will find some controls like: brightness, gamma, hue, saturation and sharpness. Play with these settings.

• Satellite L20-100 shows only black and white photo on tv

  L20 - 100 shows only the black and white picture on tv through s-video. How to get color?...

  Hello

  It s not a laptop malfunction but the TV setting wrong. Some TV units have the option to turn on the S-VHS. If your TV doesn't support that you can use an a Cinch cable to connect the laptop to the TV.

  Please check also several topics in the forum. This topic has been discussed a lot of time.

• Black and white photos at the start of printing OK then turns reddish, changed the cartridges, same problem

  HP Photosmart C4600 all in one printer, HP, Windows7 desktop. When I try to print copies of old black & white photos, on premium Matt paper or any document (I tried all), with settings for grayscale or black and white, printing starts OK (black & white) and soon begins to print with a reddish tint. I changed the cartridge back & White 3 times with the HP cartridges and the problem persists. I cleaned my print heads, the problem persists, I tried various other parameters without result. Finally, I gave up and I went back to my old Epson 15 year for problem free Photo printing. How can this problem be fixed? Thank you!

  When you print graphics color cartridges are usually used to print even black and white.  In addition, when printing on the paper color photo is always used as the pigmented black ink cartridge is not compatible with the photo paper.

  It would seem that your color ink runs out.  See the troubleshooting steps described in this page.  Most likely, you need a fresh color cartridge.

• How to convert TIFF black and white color?

  I have 11 items on an iMac with OS X 10.7.5 (Lion). I want to convert a black and white TIFF image, but when I click on improve the option convert to black and white on the menu that follows is grayed out. Is there a way to do this or do I have to convert TIFF to JPEG before I can convert color to black and white?

  Your solution worked! Thank you for the necessary reminder that there are still some actions that are not items on 16-bit images.

• When I try to print in black and white, my picture is flooded with blue ink

  Hello! I made sure that all print settings were correct. I did a cleanup of the heads and made sure that the inks were all full. I put six by four inches of the printer and used hp advanced photo paper. I put the gray-scale printing, as there is no settings for black and white.

  When the picture came through, he started to gray scale and further to the bottom of the image has been flooded with blue ink. I have an all in one printer fax C309 series. can someone help me please?

  It seems that the print head may have a problem. Lets go to the printing preferences for the printer (these can already be defined this way if yes let us know). In this window on the left column of the impression of the shortcuts can choose Fast/economic and set printing in grayscale on the right of "Black ink" only If your setting has been set to high quality try again to print. If you were already set to "Black ink" only under the grayscale option the printer may require repair.