Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

As indicated in the title, I bought a ti 750 gtx.

N750Ti-2GD5/OC

The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

The system is a h8 1203, with a power of 460.

I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

Advertisement

Hello

If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

Don't forget to create a set of external support of HP recovery before installing a new operating system.

Tags: HP Desktops

Similar Questions

  • The food is just out on my Power Mac G5 2 .3GHz so it does not start. My question is, if I pick up another opportunity G5 2 .3GHz and install the HDD of my G5 will be a new start up as usual.

    The power just went out on my Power Mac G5 2 .3GHz and will no longer start up. My question is this. If I pick up another opportunity G5 2 .3GHz and install the hard drive of my computer it starts as usual? I just need to get the files on my computer.

    J.

    Yes, if the disk was not damaged.

  • Windows vista has been updated, and then just went to black screen and the kind of start to restart all.

    It just seems to be a loop.

    Hi Linda,.

    Thank you for your response.

    Here are some steps that you can try in order to solve the problem.

    I suggest you to change the startup command sequence and select the hard disk. Then, follow the steps provided by Abdul R and an update with the results.

    If you still get the same error message, disable the floppy in BIOS drive and check.

    You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

    Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

  • I just upgraded to window 7 for windows does not start Lightroom 10 6 because it cannot open the catalog or one of my backups

    I just upgraded to window 7 for windows 10. 6 Lightroom does not start because it cannot open the catalog or one of my backups

    Yes, once the user account is the upgrade to windows 10 have permission on the folder of photo issue, which prevents the Lightroom to create the necessary temp file when the catalog is launched.

    This is the reason why I asked to copy the catalog file to another location to narrow down the reason for the problem.

    Thank you

  • Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

    Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

    Open a book, tap, tap of he two, disable auto-nuit theme.

  • Just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

    just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

    Original title: sync

    Ask the question in the Apple Forums:
    https://discussions.Apple.com/index.jspa

  • Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

    I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

    Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

    I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

    I would like to point out something that you may not realize: Windows 8
    has two interfaces; the modern/Metro Interface (which may be all the)
    you have looked at) and the traditional desktop Interface. You can use
    one or both. This traditional desktop Interface is almost
    identical to the interface of Windows 7. the biggest difference is that
    There is no Orb start clicking to bring up the start menu.

    But note that you can get the ORB start by using one of the many
    third-party programs, are free or very cheap (the classic interface
    http://classicshell.sourceforge.NET/ and debut8 to
    http://www.stardock.com/products/start8/; my personal preference is
    Debut8, but they are both very good).  And goes from an interface to
    the other is very easy; There are several ways, but simply by pressing
    the Windows key is perhaps the easiest.

    Just install one of these two and using the traditional desktop computer
    interface may be a better choice for you than going to Windows 7.
    I use Windows 8, almost exclusively with traditional workstations
    the interface and with 8 Start installed. If you were to look at and use
    my computer, you may have a hard time realizing that it is not
    Windows 7.
    I also recommend to read "how to make Windows 8 or 8.1 watch and.
    Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
    I can't address the issue with your games, except to say that
    whenever you move to a new version of the operating system, some of
    which is used to run on the former does not work on the new. And it's
    much more likely with utilities and games with companies
    applications.

  • I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

    I just replaced my MB Pro with a MB Air. Air has less memory and will not support a full restore of files and the saved data. How to do a partial restore

    Do you still have the MBP? If so you can manually copy and paste the files you need.

    If you do not have the pro more, you need to buy a USB key and plug it into the MBA... use it as a target. Once you have a system file of the previous laptop again, you have to manually choose what to copy across.

  • Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

    Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

    Hello

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    Try to use the following method to see if you can install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • my pc just does not start

    My pc shows only the departure options, namely the security mode, operating system options and so on. Just, I can't access. I have very important information on the HD. Help, please.

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

    I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

    Hello

    Have you changed the boot order?

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

    http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

    See you soon.

  • Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

    Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    Hello

    1 did you changes to the computer before the show?

    You can try the troubleshooting provided in the link below steps to fix the problem.

    Computer stops responding with a black screen when you start Windows XP

    http://support.Microsoft.com/kb/314503

  • Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    You have all the features non-essential related to the machine?
    Have you installed a new hardware or software recently?

    Try to do a repair install and see if it corrects the problem.

    How to perform a Windows XP repair install

  • my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

    whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

    Hi leonardhurley,

    Since when are you facing this problem?

    You did changes before this problem occurs?

    What is the exact blue screen error message you received?

    Method 1

    I suggest that you perform the last good known Configuration

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

    Method 3:

    I suggest you to follow the article below for the Blue error screen.

    http://support.Microsoft.com/kb/958233/en-us

  • Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

    My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

    System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

    That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

    I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

    Help or direction is appreciated.

    original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

    See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

    So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • text of emails downloaded becomes corrupt, moved to other emails or just deleted

    A block of downloaded emails, a few days ago will come back three weeks, have altered the text, moved or simply deleted text. The corrupted text looks like its Web page code or source code. Sometimes the text of a message will be displayed, not corru

  • Stream HP 8: Stream 8 unusable

    I bought a Stream 8 in June 2015, the date on which it was running Windows 8.1. I am used to working with an iPad and was struck by how much slower the Windows tablet was, and where the way in which the touch screen has been. For five months and, aft

  • iPad has no voice

    MY iPad has no voice, first it noise and subsequently was a rumour

  • How do we install the office 2016 on macbook without cd/dvd drive?

    Just ordered a MacBook pro and MS Office 2016 for my daughter's school work. I don't think that the MacBook has a cd/dvd drive. How to install the office 2016? Is there a MS or Apple site to download the software and use the key provided with the Off

  • Conflict of class during import

    I have the ugliest ever created VI (and not by mysself) that I was tasked to maintain and modernize.  It's a quagmire, but it's a quagmire that works with a few minor exceptions.  It was written using LabVIEW 7.0.  One of my todos is to make it work