just installed sp3, xp does not start, gores in safe mode.

Similar Questions

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Windows XP does not start even in safe mode. He just continues to repeat the start-up process unsucessfully.

  I had to force my computer last night.  Now the computer is turned on, I see Windows XP, then the computer passes the screen advising me the computer was closed and asks me if I want to start in safe, regular or the last usable parameter is known.  Unfortunately, they are all take back me to the same screen after a minute and the whole process starts again and again and again.  It does not start in same mode using F8 or F12.  Any advice?  Computer is an older laptop, but it worked great the day before.  I don't have add new programs.  I get the Toshiba screen and XP logo, but nothing beyond.

  Hello

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

• After the updates installed for xp edition family, computer does not start even in safe mode (or in any other mode)

  computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)

  HiRonKlip,

  If you have the Windows XP installation disk, you can perform a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox does not start unless in safe mode, what to do?

  One day, Firefox, Windows Explorer, or Windows Mail will start up. No explanation as to why. I have a connection to the internet, my virus definitions are up to date and a program that I use and which works through Remote Desktop says I'm connected to the internet. Firefox starts in safe mode, but even if I reset it doesn't start off safe mode.

  Hey, installed new drivers for the video card and it works perfectly. It wasn't a good intuitive solution - it did not make sense to me beforehand that it was likely to work, but it worked so - so much for my intution!
  Thank you!

• XP does not start even in safe mode

  Morning,

  I'm having a problem with my machine so I think you better ask before as I have pay for some shenanigans of costly data recovery.

  When I start the machine it starts very well, I can go into the bios end. But then, instead of loading windows need to standard safe mode screen. (I did not any software or hardware passes the machine in a few weeks and it has worked very well since that time.)

  If I select all the options of safe mode 3 (safe mode, more networking, more command prompt) throws of machine up to a load of white text then asks me to press on enter to continue loading 'C:\windows\system32\drivers\sptd.sys' and if I press on enter it reboots. If I press anything it restarts.

  If I choose either start windows normally or last good configuration it starts to load windows (with the XP loading screen), then throws a 'blue screen of death' to a milliseconds so I don't know what it says and then re - start.

  Is there a way I can re - install windows XP without losing files (word documents, etc.) on the disk? Or can I put the hard drive in another machine and retrieve the data off that way?

  See you soon,.

  ANDY

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Have you ever used third-party applications on your system where the product description includes descriptive as sentences:

  cleaner, mechanic, detective, doctor, heal, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost booster, guaranteed.

  You now or have you ever had installed Daemon Tools or Alcohol 120 products installed on your system?

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows Vista does not start even with safe mode in HP

  Status: 0xc0000098 file: \Windows\System32\Drivers\914c7af9ebad1205.sys Windows Vista home gives this warning on trying to start. Will not go in safe mode. You have to solve this problem. Got the original disks from HP.

  Thanks in advance.

  Hello

  You can try to re-install using the original HP discs.

  HP should give you the possibility of a destructive or non-destructive restore.

  Or try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• MacBook does not start (even in safe mode)

  Hi, I have a MacBook pro that won't start. When I turn it on, I hear the ring of priming, but then the screen stays black. I tried all possible troubleshooting recommendation, that I could find on the internet, but nothing makes a difference. None of the startup option keys (start in safe mode, mode disk target, selection of the boot drive, etc.) anything. I can reset the PRAM, but nothing else has even made a difference. All I see is a black screen

  Last night, I tried to install another OS in a dual-boot configuration, so I was messing around with partitions on my hard drive. I thought that the worst case scenario, I could always reinstall the OS. Can really break the complete formatting of the hard drive boot sequence? I thought that a hardware failure would prevent me from booting from a USB stick recovery.

  The computer is a MacBook Pro 15 "start 2013I think.

  Thanks for your time

  Command-R works.

• Windows does not start. even in Safe Mode.

  Error message is: load needed DLLs for kernel.

  In safe mode, I get this:
  multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\ntoskrul.exe
  multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\hal.dll
  multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\KDCOM. DLL
  multi (0) disk (0) rdisk (0) partition (2) \WINDOWS\system32\BOOTVID.dll

  Hi MerryThompson,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  Method 1

  Check if the computer can be started in the last known good configuration mode.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2

  If the computer can boot using the last known good configuration, and then refer to the article below and try the steps mentioned, check if it helps.

  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

  http://support.Microsoft.com/kb/812450

• My laptop does not start even in safe mode!

  My laptop turns off earlier today and when I tried to restart it I got an error in the Boot Manager Windows read:

  File: Windows\System32\Drivers\RapportKELL.sys

  Status: 0xc0000098

  Info: WIndows could not load a critical system driver is missing or corrupt.

  The laptop is a Dell Inspiron 1525 and runs an operating system of windows vista.

  I tried to run in safe mode and it will not work. I believe that the report is a kind of software that my guest Bank me to download. Is there a way to delete the file from my hard drive?

  Just ran diagnostic and ended with 0142 and 2000-0142 error code.

  I hope someone can help.

  Thanks in advance,

  Sam

  Go to this web page and see the table of codes. Each has a link to get more information and, generally, an element of action to solve the problem.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_14B3819735D6B40EE0401E0A55177ED2&isLegacy=true

  It will be useful.

  Tom Ferguson

• Windows deleted files to space, now my computer does not start except in safe mode. Any ideas?

  I got a message pop up saying I've been low on free space, I select the files to delete the computer option. He ran through the process and deleted files. I shut down the computer and have not used for a few days.

  I tried to connect this morning it took forever to get to the password page, when I chose my name once again it took forever to load the password box. He then told the welcome as usual, but for several minutes and then the screen turns off, I left for almost an hour and nothing. I removed the battery and connected in safe mode that began end.

  My system using windows Vista. I'm not good with computers so all ideas/help would be great.

  Hello CarrieWilliams,

  Thanks for your post.  Try a Startup Repair before leaving for the new facility.  Let us know the results, we look forward to hearing back on your part.

  See you soon

• Just installed CC - Apps does not start after the App Manager v7.0 update

  I get a few different error messages after installing creative cloud for the first time.

  I should mention that I accidentally uninstalled Adobe Application Manager, but then upgrade v7.0

  

  Hi DannLedwick,

  Please perform the following steps according to how you use.

  Mac OS X 10.7 and later versions

  1. Remove AdobeAAMDetect.plugin HD/Library/Internet Plugins /.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud.
  4. Sign in using your Adobe ID and password and download the creative cloud Application.

  Widows, 7 and 8 (64-bit)

  1. Using Explorer, go to \Program Files (x 86) \Common Files\Adobe and OOBE and rename it OOBE_old.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud.
  4. Sign in using your Adobe ID and password and download the creative cloud Application.

  Windows 7 and 8 (32-bit)

  1. Using Explorer, go to \Program Adobe and OOBE and rename it OOBE_old.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud
  4. Sign in using your Adobe ID and password and download the desktop CC application.

  I hope this helps.

  Kind regards

  Sumit Singh

• My Xp does not start, only in safe mode. Normal mode just keeps looping in the loading screen. Safe mode works fine, what to do?

  As the title says. What should do?

  I found out what is wrong. The hard drive could not be "read". Drive C and D was crushed. Had to change the hard drive. Changed, working (y). Thanks anyway :)

• Firefox plant start up after update of Norton 22.5.4.24 - does not start even in safe mode

  Windows XP

  Install Firefox 41.0.1 own - same problem
  Install Firefox 40.0.3 own - same problem

  Incident reports could help us by giving you an individual diagnosis, but if they are accidents of almost instantaneous startup, allow me to mention something that is 'flow' where you have this problem:

  Firefox crashes a few seconds of starting if you have either the Applian Technologies Freecorder and Replay Media Catcher programs in combination with Norton Security software (and possibly other security software).

  If you have either of these Applian programs and it is not essential, try to uninstall it then restart Windows to ensure that none of its components are running.

  Firefox will start normally after that?

  (If you do not uninstall the program, another user said he used msconfig to stop execution at startup and that fixed FlvSrvc.exe. See: https://support.mozilla.org/questions/1086722#answer-789197)

• Firefox crashes. It does not start even in safe mode.

  Crash ID: bp-f3d4cb77-2341-475c-8b36-2b7222150903

  The first entry is the regular Shockwave Flash plugin that Adobe puts for Linux.

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

  This element appears as plugin.state.flash on the topic: config page.

  The second is the PepperFlash plugin.
  I do not know if this plugin would get a name different pref to disable.
  You can remove the plugin temporarily from its installed in usr/for location prevent Firefox to detect.