Just re installed Windows Vista and now my internet connection is extremely slow.

original title: poor internet for vista

I reinstalled windows vista. Until I reinstalled windows my internet works perfectly, I reinstalled it, now that my internet work to only a few bytes per second. It takes about a week to download an update. With several reboots, sometimes it will download 20 MB as regular, then it will take 2 days to 2%. What is the answer, the cable is fine, the internet is very well because other computers put on it. Is there a port or something that I need to open in the firewall windows or defender or something, help a guy it's ridiculous.

Hello

as you reinstalled Vista, have also downloaded the latest network adapor, pilots etc. for your machine?

Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

go to their website and look for a driver and software download section

Enter your model number for the last look drivers vista then download and install

Tags: Windows

Similar Questions

  • Re-installed Windows Vista and now it says my product key is not valid and will not turn on.

    original title: Vista Down... Need help, please...

    HII...
    I have a problem now
    I use Windows Vista Home Basic
    Recently I formatted my pc and reinstalled it clearly...
    But my windows vista could not activated online... My product is properly pressed, but it still will not yet enabled
    I can't think of her
    Please help me someone
    THX
    Concerning

    You may be prompted to activate Windows Vista

    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 931573

    Vista controls and SLMGR explained

    http://www.tech-recipes.com/Rx/2062/vista_activation_slmgr_command_options_explained/

  • I have just re-installed Windows Vista and I can't find all the files he supposedly saved.

    I recently reinstalled vista (yes I know I should have bought mac) in any case I can't find all the files I've supposedly saved. any ideas? Thank you

    original title: Reinstall vista

    Hello

    You don't say how you have reinstalled or how or where or by which program or process, you saved your data...

    A relocation normally will wipe away the old operating system and all data during the resettlement process.

    You can try this free program to see if it can recover your data:

    http://www.Piriform.com/Recuva

    See you soon.

  • On Win 7: I just installed windows 7 and now I can't play properly. They run slowly.

    I just installed windows 7 and now I can't play properly.  They run slowly.  I tried to download the drivers updated my video card without success.  Do you have any suggestions?

    Windows 7 comes with installed DirectX11. In order to run your games, you need to install the package DirectX9 and updates here:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

    This should make your games run better.

  • I reinstalled Windows Vista and now I can't run "repair your computer".

    I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts.  What should I do to fix this

    Hello

    Run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • I installed windows 7 and now my bluerayburner does even appear quite Similarly in Mgr. device!

    Hi, I installed windows 7 and now my Blu - ray drive does not even appear not at all, even in the device mgr. When I put it in a disk begins to spin and it stops, but it does not even acknowledge at all that there a burner. I know that there are many problems with windows 7 Blu-ray disc does not play, but I can't even get there. Is there a fix to windows again? I appreciate all help. Thank you, God bless you

    Radlfly
     
    [Moved from comments]

    Hi Radlfly,

    I see that you have some problems with the burner blu - ray on Windows 7. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. What is the brand and model of the blu - ray player?

    3. have you made changes on the computer recently?

    4 is the issue confined to this hard drive?

    I want you to know that Blu - Ray is a patented technology, so need the codec appropriate to buy and this is why we cannot include it in our operating system.

    To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

    Click on the link: MPEG and DVD video: frequently asked questions: http://windows.microsoft.com/en-US/windows7/MPEG-and-DVD-video-frequently-asked-questions

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • I installed windows 7 and now my canoscan lide 50 scanner does not work.

    I installed windows 7 and now my canoscan lide 50 scanner does not work. Anyone know if it will be a windows 7 update driver to resolve this problem? If this is not the case, what scanner in the price of $80 will work on windows 7?

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/1afc4c13-551e-4372-8ecb-c16dfbfd442f/

    Here is the solution for the LiDE 50...

  • I bought around ten year 7 Photoshop and Indesign etc and now I'm using only Photoshop 7. Three months ago I installed Windows 10 and now the ad once I can't use my Photoshop 7 more. Should wat I do?

    I bought around ten year 7 Photoshop and Indesign etc and now I'm using only Photoshop 7. Three months ago I installed Windows 10 and now the ad once I can't use my Photoshop 7 more. Should wat I do?

    The oldest is compared to newer operating systems, it is less likely to work.  If you have been happy with the help of Photoshop 7 then you should be happy with the old operating system as well.  Your options are either to return to a system that supports your software or to buy new software to go with the new system.  CS6 products are still selling as far as I know.  In addition, your only option is to subscribe to the cloud of Creative for Photoshop CC.

  • I have a paid subscription to cloud creative Illustrator and photshop. I had to make a computer reset due to windows 10 and now when I connect it says start trial?

    I have a paid subscription to cloud creative Illustrator and photshop. I had to make a computer reset due to windows 10 and now when I connect it says start trial?

    Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  • Update installed windows vista can now update Mcafee

    I have Setup several days after the first notice of delay then let Windows automatically installs the following updates on April 11,2012, Bing bar;

    Securite.net Framework 1.1 update (KB2656370);

    .NET Framework Client Profile 4 (KB2446708), (KB2478663), (KB2518870), (KB2539636), (KB2572078), (KB2633870), (KB2656351), (KB2656368), (KB2468871), (KB2533523) and (KB2600217);

    Stnd Micrsoft Office 2007 (18) (KB2508958), Service Pack 3 (SP3), (KB2596785), (KB2596871), (KB2598041), (KB2596764), (KB2596912), (KB967642), (KB2596651), (KB2596789), (KB2598306) and (KB2596596);

    Microsoft Windows (KB905866), (KB2679255), (KB2653956), (KB2656374) and (KB2675157).

    Computer, also blocked intermittently and he was not doing this before the update.

    Spent several days with McAfee technicians and supervisors and Internet provider, finally had McAfee remove all traces of their product (I have been a loyal customer for years).  Completed your suggested steps or no available - computer still froze whenever UAC came.  Since its launch, suspended at other times too, I have more tests and decided to replace the hard drive.  I installed Windows Vista Home Premium 32 BIT of Dell supplied DVD of resettlement, and computer is not suspended when UAC comes upward or at any other time.  However, now I am having issues get Vista SP1 installed (see separate post).  Thanks for your help.

  • Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

    Wireless connections

    I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

    Hello

    I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

    You can also try the following methods and check if it helps.

    Method 1:

    Update a network adapter driver.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Troubleshoot network adapter problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • I installed windows 8 and now I have no dvd/cd player

    I have a HP Pavilion series g approx. 3 months and everything worked until I installed Windows 8. Now, I have no dvd/cd player. I tried the Manager of devices etc and still no dvd/cd player. I looked on this site but nothing worked (hard to follow, I'm just a simple person and need instructions very very basic) I noticed that there are many people with the same type of problem. How do contact you Microsoft to resolve this issue?

    G ' Day

    Yes still available at http://windows.microsoft.com/en-au/windows/downloads

    There are three available in the middle of the page you're viewing down they are

    Windows Media Player
    Windows Photo Gallery
    Windows Movie Maker

    Hope this helps

    I downloaded the media Player and it works fine.

  • My hard drive went bad so I bought a new. I installed Windows Vista and everything works until I try to install SP1...

    As I said in the title, my hard drive went bad on my Dell XPS 420.  I was running 32 bit windows vista service Pack 2 since the last time my hard drive gone bad.  The first time I replaced my hard drive I used the cd of Windows Vista install with cd drivers and using automatic updates of windows.  In a few hours, I had my pc up and running.  But with this record, it's a completely different story.

    I did the same thing with her.  Installed Windows and drivers as before and I go ahead and do the automatic updates.  Everything is okay until I get to point when I download and install windows Service Pack 1.  I download, install and it seems to work very well.  Then it restarts to complete the installation and configuration.  After about 30 minutes of this, he finally said service pack error.  Restoration of the changes.  He then takes 30 minutes more to do.  After that, I get a screen saying that Windows does not start.  A recent hardware or software change might be the cause.  Follow-up by telling him to use the windows cd repair section.
    I did this 3 or 4 times to do different techniques.  I did it with the automatic windows update.  Manually as an administrator.  After using the analysis tool in Windows Vista and in another way when restore you some files.  I am about to throw my pc because I've probably spent nearly 10 hours of messing around with it and honestly it's not my time unless there is ANOTHER way that deserves to be tried before I "Offices" of the thing.
    Honestly, I think I read every article on this subject online.  If I type in service pack 1 and vista online I went to all the links on the first 10-12 pages...
    If anyone has AN idea please let me know.  Yes, I would like at the office space that it but it would also be good to have another pc with a new hard drive...
    Thank you.

    Hello

    If you go to Start, all programs, Windows Update and view update history, you will see the entry failed for SP1.

    If you right-click and choose details, it should give you the details of the error.

    You can also read the following article and check:

    Learn how to install Windows Vista Service Pack 1 (SP1)

  • kb2633171 a security update wont install windows vista and keeps on saying failed in the history of updates with the error code 80070020

    Original title: kb2633171 security update will not install windows vista

    Hello

    as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.

    I ran the fix it and aggressive to solve this problem, no luck :-(

    any help muchly appreciated.
    Thank you!

    Chiara

    Hi Chiara,

    Try following the steps in the following article.

    You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

    http://support.Microsoft.com/kb/883825

     

    Let us know if it helps.

  • Reinstalled Windows Vista, and now the graphics are distorted.

    After installing windows Vista, I noticed that the graphics are not good. Looks like it's tense from left to right. Round circles are shaped eggs. I tried all the different settings and the same results. I get this message and I wonder if it is related. It is said CCA proxy.exe totle bar and then says unable to connect or locate ConnAPI.DLL.says to try to reinstall. I did saw that I don't know what it takes to reinstall or where?

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    If the above does not solve it:

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    They will help you with your question in Vista Hardware and drivers Forum above.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • iPad Air / homepage

    I can't get to the homepage on my iPad Air.  Isn't he dead?

  • Driver chipset for A60-122 and Windows XP Pro

    Hi all.I'm trying to upgrade my Satatellite A60 - 122 win XP Home Edition to Win XP Pro.I downloaded the new version of the drivers that I need after the installation of operating system directly from the site, I also download and print the order to

  • Transfer to VIEW report card

    Hello I'm trying to transfer a card from the DISPLAY Panel in the Panel REPORT. However, it is not serious as I do (by button or script), the card gets strechted. Do you guys know how to fix it? SEE the Image REPORT image Sincere greetings, Augusto S

  • why I get error 80072efe messages and fffffffe in windows update wtf?

    Windows Update was not able to install the new updates since 08/01/2012. Get these error messages & Fixit Center does not squat - all the answers?

  • PROBLEM IN THE ACTIVATION OF WINDOWS 7 STARTER

    I have the original CD of WINDOWS 7 and the original product key, but when I activate windows online. A context menu appears and displays the following message "THE PRODUCT KEY YOU TAPE cannot BE USED to ACTIVATE WINDOWS on THIS COMPUTER" I ask why t