Just updated the BIOS to 2.17 - 1, 08 and received a message from stopped working.

Similar Questions

• ProBook G3 450: I've updated the bios on my g3 Probook 450 and now potrs usb do not work

  I've updated the bios and after restarting the pc no usb port work and the usb serial bus is not listed in Device Manager. I have not received any error.

  Hi Richrob,

  Usually after the BIOS updates I recommend restoring the default BIOS because some parameters may change or managed power States must be refreshed. If you start at the F10 menu there will be a restoration of the default BIOS on the home page.

  If the USB bus does not return to the top after restoring default values, try to reinstall the USB driver. You can find the latest version for Windows 7 here.

• ThinkPad E540. Update the BIOS 2.09. Swap Ctrl and Fn bug

  When I have updated the bios to 2.09 I see in the changelog

  Adding support for shortcut key Fn + p (Pause) / Fn + K (stop scroll) / Fn + B (Left-Ctrl + Break) / Fn + S (Left-Alt + SysRq)

  But this change is bug. I use exchanged Fn and Ctrl key. And the combination of keys CTRL + S produces CTRL + ALT. Please correct.

  
  

• HP just update the bios on my computer and now I have no sound.

  I have a HP Pavilion 1d67cl g6, the windows operating system 7. HP just updated bios and now I have NO SOUND. In system devices, it says everything is working normally. Nothing is cut, just NOT of HIS. Help

  Hello:

  Go back to the BIOS and the BIOS to its default values and restart.  See if get you your audio files.

  Try reinstalling the audio driver, if it does not work.

  Try a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c01684768 & prodTypeId = 321957 & prodSeriesId = 3688868

  Last resort, back up your files and perform a recovery of the system back to the form of the plant.

  Paul

• Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

  Hello

  I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

  Any ideas?

  Hello!

  Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

  A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

  However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• VMware vsphere client is in the "inventory loading" for a long period, then received a message from "time out

  We have two type network connection in my lab, one is internal net, all computers on this network type internet access themselves, but they could access the internet through a proxy server. one is external net, all computers on this network type internet access themselves.

  If my connection to the computer's internal network, the client is responsible for the inventory for a long time when I use VMware sphere client to connect to the VMware Server and give a message "connection error". below two screenshots are for the description of the error. But if my connection to the computer is net externally, I can connect to vmware server successfully.

  

  Here is the description of my VMware Server infrastructure:

  My vmware server has two network adapters, vmnic1 and vmnic0. vmnic1 is used for the internal network, vmnic0 is used for external NET. I put a serval host in my vmware server, one of them is used for the proxy, all the computers in my lab can access internet through this proxy host via vmnic1.

  Proxy host, I add two configurations for iptables as below:

  iptables - table nat - append POSTROUTING - out-interface eth0-j MASQUERADE

  iptables - append forward - interface eth1-j ACCEPT

  Further, I have another server in vmware, I also can connect to vmware server successful if my connection to the computer's internal network. and this server network two are the same.

  How can I debug this problem? Thank you very much!

  Management is necessary for both networks separately?

  Because if not, you can move the Group of management to the internal network on vmnic1 ports...

  Create a vmkernel port and turn it on to management, assign an IP address and it should be possible to connect to the internal network.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Split 13 x 2 can't update the bios

  I have a new split of HP 13 X 2 computer laptop / tablet. I have upgraded to Windows 8.1. Tried to update the system BIOS but it fails. I have Kaspersky Anti-virus turn off when you run the update and my account is Administrator status. Evry time I try and update the bios, I get an error "failure" and said copy update has failed. What should I do to fix this?

  Just flashed manually with a USB key. Appears the utility tries to copy the update to the bios on hp/efi/bios on partition 2, but I can't find how to go from Windows, even with hidden folders to display. The update tool the wish was easier and you can specify where you put the update from version 'dumbed down too low to be useful.

  Steps to Flash manually:

  1 use the bios tool to copy the files to a recovery USB drive. It will create a Hewlett-Packard folder. In BIOS and the BIOS update, but the update f19 falls within the bios/current.

  2. with your PSU AC plugged, reboot the computer. Once the screen goes black, start hitting ESC.

  3. even if it seems you can arrow down and press ENTER to select F2, press the F2 key... without the function key.

  4. Insert the USB key, select the firmware, bios update, select the usb drive and navigate to the folder of the bios/current.

  5. you will be asked if you want to update the current bios of 16 to 19. Click bios update (forget what it actually says) and sit down and let it do its thing.

  6. restart. If you have enabled as I do of bitlocker, now you must pick up the keys. After that is done, then you have a F19 X 2.

  Have not used enough to see if 19 solves this problem of the touchpad, but refuse to do workaround above.

• HP 15 J9M32UA #ABA: update the BIOS

  HP Support Assistant lists an update to the system BIOS (Softpaq # SP76361, version F.28AP1).  I downloaded and installed and restarted when prompted.  No sign of defect to install-, BUT support Assistant continues to display a message that the update is available, and the Action log does not appear to be the update of the BIOS listed.
  
  MSInfo.exe displays the Version of the BIOS/Date as: Insyde F.28, 14/06/2016.

  Have I updated the BIOS?  If so, how can I do the instigation of shutdown Support Assistant to update?  If this is not the case, why have I not a failure message when I tried to update.

  Thank you

  Elaine

  Hi @E591,

  Thanks for posting HP forums!

  I read your post and wanted to help. I understand that there is a notification to update the BIOS on your HP Support Assistant and you attempted to perform the update, but she came back after restarting the laptop.

  It is not necessary to update the BIOS if the system is running right. You can reject the message of the HP Support assistant by clicking on the 'X' next to the update or message.

  Let me know if you need more assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Update the bios HP ENVY

  I have hp envy 15-j007tu

  When I download the bios driver on the hp website and intall it after the end of the installation my pc restarts and shows "boot device not found error 0f3"

  Hello, @6-6 KL

  Welcome to the HP Forums.

  It seems that after updating the BIOS, you cannot start Windows, you get an error message, the found boot device. I will try to help you with this.

  Follow the steps in this document: Solve Boot Device Error Message not.

  Let me know how it goes for you.
  Thanks for posting on the HP Forums.

• HP Omen: update the BIOS

  HP support assistant shows that there is the following update:

  HP notebook System BIOS update
  Number SoftPaq SP74378
  version F.34Ap1

  tried to download and install without success

  should I worry?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  No, no need to worry.

  Updated the BIOS/UEFI is not a critical task and I would say that you leave like this for now.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but can introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  Update/update IF you have any specific questions that you know have been fixed in the new version or for some serious security issues. Otherwise, keep the existing version as long as possible.

  See you soon!

• Re: How I've updated the BIOS on my NB100?

  Hello world.

  Bit of a newbie here, so apologies for that.

  How to upgrade the BIOS on my NB100? There is no use to do so I'm a bit confused.

  Thank you

  Tim

  Hey,.

  The update of the BIOS can be down with the BIOS update you can download from the official page of Toshiba. This package contains an updated software too and automatically update the BIOS.

  Can I ask why you want to update the BIOS?
  I'll just inform you that it of not necessary if everything is ok with your laptop, because this update is a bit risky and you might destroy the ROM module everything t he update just for fun.

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Portege R100: Try to update the BIOS of 1.20 to 1.60

  Hello

  I have a Toshiba R100 and try to update the BIOS of 1.20 to 1.60. However, I just get 'different ROM version' when I run the update.

  The model number on the bottom is P2010 - this is slightly different from a R100? If Yes, where can I get a BIOS update?

  Thank you

  Hello

  Well, I found the BIOS version 1.6 of 30.9.05 on the Toshiba driver page.
  This version should work properly.
  I guess you tried to upgrade the BIOS with the win version. Please consult this document:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  You will find information how to upgrade the BIOS on the R100. You must use the trad-BIOS version.

• Satellite L500-1XC - error while updating the BIOS

  Hi, just download the most recent update BIOS but there is an error everytime I try to update to come... "uefi bios winflash over 210 ac of 10% battery attached"

  Connected AC and battery not charging but tried to leave and remove too. Current bios 1.60
  I tried to find a BIOS flash utility but no permits. BIOS default loaded and tried in safe mode too.

  Any suggestions?

  Hello

  I think that's the problem because the battery is not completely charged so you can't update the BIOS. Can you charge the battery when the laptop is turned off? I mean you can see the battery LED and if the battery is charged it changes the color of the orange in white or green (it s mentioned in the user manual). Can you confirm this?

  On the other side, it would be interesting to know why the BIOS update is important to you. Problems with the computer? If it is not updated the BIOS isn't important, you can forget it. Never touch a running system ;)