K1 - CAPS LOCK does not work after BIOS flash

Similar Questions

• HP Pavilion Notebook 15-n225se: Cap lock does not work

  Hello everyone

  The cover lock does not work, or no led light upward.  She went to work, to work from time to time and now not al all.

  Because passwords often have caps there is problem enough.

  I got tired of doing a hard reboot, but the f10 key not give me access to the bios menu.

  I don't have an external key board to attach so cannot determine if it is a hardware or software problem.

  I'm now using the virtual keyboard that lights up successfully the cover lock.

  So I use the virtual key boad for the lids and the normal key Board for everything else.

  Only a short-term solution, however.

  If it is problem of contact with the cap lock key or is it a software problem?

  Because this is a business Computer to have out of action is a major problem... all I can do to solve this problem.

  Any suggestions please.

  Thank you very much

  Hi @Vegimite,

  Here is the link of how to open the keyboard on the screen to type: https://support.microsoft.com/en-us/help/10762/windows-use-on-screen-keyboard

  You may need it if the physical keyboard brings your boredom.

  You can also contact the HP support or a local repair shop to arrange a physical control for the LED issue caps lock.

  For HP, the following support link http://www.hp.com/contacthp allows to create a folder for your problem and contact HP. If you do not live in the United States / Canada, please click on the link http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html to get contact information for your region.

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

• indicator of Caps lock does not work

  My caps lock indicator windows stopped working a while ago and then I turned on toggle keys .but it has also stopped working. I am using windows 7 ultimate.the characteristic toggle key is on but it still does not work, I tried to put it and the but its still not working.i also tired ms fix the app but it did not find the problem. I would have preferred using ToggleKeys indicator, but both will do the job.

  Microsoft does not have any indicator, only the ToggleKeys.  Windows itself has never had such a feature.  You must use another program on your old computer, perhaps a program you downloaded from the Internet or a program that your computer manufacturer preinstalled for you.  Sony installs keyboard for example indicators and I think Dell has on some of their computers.  But he has never been a built-in feature.

  You can try a small program like this:

  http://www.AddictiveTips.com/Windows-tips/capnotifier-get-system-tray-notifications-for-caps-lock-on-off/

  Gives you a little Popup like this:

  

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Light of CAPS LOCK does not work

  Hello dear guys,

  Had a problem today - some keys on the keyboard do not work properly.

  I opened the hood of the laptop (Pavilion G6 2241sa) and saw that the keyboard cable was loose. I reconnected properly, closed the lid and turned on the laptop. Now, all the keys work well, BUT the CAps Lock light doesn't work well. Key works, but when I press on it - will light, but as soon as I release the button - the light turns off. Light is not. Also, when the real function of the caps lock is on, when I press another button, the light on the surface of the NumLock key but it is dim.

  I recheched cable keyboard again - everything is fine, but seeing locking caps does not stay when you press.

  I don't practice typing for the last 3 months for a few hours a day, so I guess that it also affects the life expectancy of my keyboard.

  Would appreciate any insights on this light lock thanks a lot, lives

  Thank you for your response. But the General solutions do not work here, I'm afraid.

  My inner voice tells me that it is the problem of specif inside wiring that cannot be fixed, perhaps only by the replacement of the entire keyboard or keyboard cable.

  I appreciated your help in any case. My keyboard works, light Verr Maj is not so important, that's why I will end this matter as resolved. Cheers, lives

• Re: Computer laptop Satellite U does not work after BIOS update

  I was updating my BIOS.

  My computer restarted abruptly, saying: there was a problem and that a check should be performed.
  After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

  When I rebooted, it stopped working correctly.
  The screen, keyboard and USB ports do not work.

  Can anyone help with this?

  Hello

  Looks like something was wrong during the update of the BIOS.
  In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

  I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

  Good luck

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Equium A60-173 does not work after bios update

  Computer laptop girls. A lot of windows screen blue/broken files. Who sets. Site Web de Toshiba says 1.8 bios c can stop it again - Web site also announces 1.90 bios. To go with this...

  Tried to Flash the Bios 1.90 which you have to do in the (stupid) windows. Naturally it hangs during the "preparing for the bios update", with only 15% of progress. WAITED a very long time (30-45 minutes) - no progress took place. Had to turn off the machine and had clearly not worked.

  Now the machine will even not respond to the switch. I was expecting a momentary start - but it's like the power switch has been disconnected. Actually attaching the power supply does not even turn on the power light!

  Can a flash failure turn off the machine so much?
  Or would it be another fault (as well!)?

  Thanks for the tips...

  > Not waited a very long time (30-45 minutes) - no progress has occurred. Had to turn off the machine

  Looks like you broke upward from the procedure of updating the BIOS and it's deadly!
  I put t see any other possibility as to contact the ASP in your country for assistance!

  Maybe you are a lucky man and module ROM on the motherboard is not damage and must be flashed only
  Please note that the update of the BIOS is risky! If you use an incorrect BIOS or update wrong procedure can damage the MB

• Satellite P855 - 10 H does not work after BIOS update

  I bought a new laptop Toshiba Satellite P855 - 10 H recently and there is no problem. Yesterday (August 12, 2012), I saw a warning from center of Toshiba it is has updated dated August 1, 2012, for BIOS and followed all the instructions until you reboot. Laptop not a not restart after you finish all the process successfully.

  Closed and now I can't start. Downloaded the latest bios file in a usb port on the support site, but because it's the exe, I couldn't use it.

  Any suggestions to save my new laptop?

  For me, this looks like screw at the top of the BIOS.
  I put t know whether you will be able to get this working again, but check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

  Maybe it will help you.
  Be so kind and post comments.

• No noise/driver does not work after BIOS update

  Hey, I'm having a problem with my audio drivers. I have what I think is a HP P5RC - motherboard (I'm still not positive, because it was given to me, and I not found any precise identification on it), and I use the onboard sound on this subject. I've had versions of Windows 7 on this computer since the Release Candidate, and at the time I had to manually download the Realtek audio drivers to get the sound to work. I had to do the same thing when I got the full version of 7 Ultimate. After installing Win7, I had various problems. I was able to trace the problem down to the motherboard, but wasn't sure if it was a hardware or BIOS problem. I tried updating the BIOS to Bishop 3.08 since this page and found no big difference, apart from the fact that the sound did not work. I tried redownloading and installing Realtek drivers and restarted, but I still get all the sounds. What is another problem with the material of the motherboard, BIOS update problem or a driver problem?

  Thanks in advance!

  -AMV_Ph34r

  Edit: I should probably note that I built the computer and used the motherboard that was given to me in this document is not an HP computer.

  Edit 2: Another note - I have an Asus EAH3450 video card, which has a HDMI port on it. HDMI audio driver has two audio devices in the control panel and Device Manager. However, I do not have a compatible monitor HDMI, so I need the built-in sound card.

  Because your video card can also function as a sound card you must go into the BIOS and change your sound option to 'Auto' (which is probably trying to use your card as the audio device video by default) for the on-board sound of motherboards.

  If you found my answer helpful please say thanks with a KUDO (click on the star).

• brightness key does not work after bios update

  Hello. I have laptop 650 hp, everything has worked until I have updated the bios after this brightness keys don't work. I tried reinstalling the drivers, restored, updated the bios, hd formatted, installed windows and drivers the latest and still nothing. all other keys work fine. checked the buttons, they all work, it's just the brightness function is not working. Thank you.

  the version the older BIOS, now his market not :/