K111DX M-7 HP: HP K111DX M-7 PCI Simple Communications Controller Driver

Similar Questions

• M7-k111dx: weird load behavior

  After the Cumulative Update for Windows 10 Version 1511 for x 64 systems (KB3124262), my charge indication is no longer the correct state. I have 2 batteries, one of them, fresh, but when it is full, the light turns white, the other a works very well. All the tips are greatly appreciated.

  Hi @ethandrzb,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m7-k111dx Notebook and concerns with the load turns on no longer works correctly. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• My Envy Touchscreen M7-k111dx laptop does not light.

  My laptop was working fine. He has been connected as for the charge of the battery. I went to bed, got up the next day to use my laptop. I pushed the power button and nothing happens. I made sure the battery was sitting properly and also plug it into the laptop and the wall. I also tried different outlets in my house and nothing.

  The only thing I ca tell you is that when I press the power button / light next to the power input (3) will blink once, then stops. Nothing happens more. This is all the information I can provide.

  So can you please help me find a solution? My warranty has expired.

  S/N [personal information]

  P/N G6U51UA #ABA

  Model: M7-K111DX

  V/R

  Scott

  Visruth,

  I went and looked in the end of the power connector where it connects to the computer and found centering on the power adapter pin was bent to such OneSide and this prevented him from seating properly in the laptop.

  I used a flat screwdriver to an eye glass repair kit and it curved towards the middle.   VALA!

  Everything works, computer turned on and the battery is charging.

  I want to thank you for the research and suggestions in my search for answers.

  V/R

  Scott

• HP Envy M7-K111DX: password on HP Envy OS Windows 8.1

  I hope it's good advice for that matter. I have a brand new HP Envy M7-K111DX. I put the password for, but when I put in what I thought, it was the password, it tells me it is incorrect. I tried many variations.  I foolishly do not write it down but was a good indication. Is there a way to reset the password?

  Hello

  If you have created the sign - on with an email and password, you can reset the password via another PC from the Microsoft page on the following link.

  https://account.live.com/password/reset

  Kind regards

  DP - K

• Upgrade memory for HP ENVY M7-K111DX

  
  

  AJ.

  Check your other post here.

  http://h30434.www3.HP.com/T5/notebook-hardware/memory-replace-on-HP-envy-M7-K111DX/TD-p/4758787

  REO

• G6U51UA: m7-k111dx 2nd HARD drive

  Good morning and good night to all

  I was wondering if a G6U51UA or M7-k111dx laptop computer may have installed or has space for a 2nd hard drive?

  I also noticed that the memory can be upgrade to 16 GB curretly comes with 12 GB

  concerning

  That space for a 2.5 inch SATA hard drive. Here is the Manual:

  M7 manual

  There is a port of WSSD m2 where you can install a tiny bit hard drive (small in size but very fast and if you have the males can be great in quality). See Page 71. This is not an easy task and requires the removal of the motherboard.

  It can take 2 x 8 = 16 GB of RAM, but it is much easier to install than the hard drive of the WSSD m2.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Want M7-k111dx: upgrade CPU on Envy M7

  I was wondering, since I was able to upgrade my HARD in an SSD drive, if I could upgrade the processor as well. 2.6ghz is a bit low for me, and I really need it to be an i7. Also, if I upgrade, I would buy the processor of?

  Model no. is Envy M7-k111dx, East of processor i7-4510u.

  Thanks in advance,

  -titanium_spork

  Hello @titanium_spork,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about upgrading the processor and wanted to help!

  The processor of your product based on the following guide is attached to the system board and cannot be upgraded.  To upgrade the processor, you must replace the motherboard: HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY Notebook PC Maintenance and Service Guide of m7 (Chapter 1, Page 1).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• M7 k111dx: put an ssd of m.2 is in my laptop

  My laptop current (m7-k111dx) has a slow hard drive and I think to put a ssd m2 in the slot. I'm currently set on the Samsung 950 Pro ssd 512 GB. This ssd will fit in the slot? Can I start it? All information is useful. If this ssd is not compatible with my computer, please list a few that are.

  Hello @ethandrzb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand you want to improve the performance of the laptop.  I'll be happy to help you with this!

  Based on the following guide, here is the disk information supported for your laptop:

  HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY Notebook PC Maintenance and Service Guide of m7 (Chapter 1, Page 2).

  Hard drives:

  Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)

  Storage SATA m2 (Port0)

  Accelerometer / HDD protection support

  Supports the following drives:

  ● 1.5 to 5400 RPM, 9.5 mm

  ● 1 TB 5400 RPM, 9.5 mm

  ● 750 GB 5400 RPM 9.5 mm

  ● 500 GB 5400 RPM - 7mm / 9.5 mm for PC portable HP ENVY 15 only

  The hybrid configurations:

  ● 1 TB 5400 + 8 GB NAND hybrid disc HARD 9.5 mm

  ● 750 GB 5400 + 8 GB NAND HARD 9.5 mm drive hybrid

  SSD drive:

  ● 256GO M.2 SATA (MLC)

  ● 256GO M.2 SATA (TLC)

  Storage configuration double for the HP Envy 17 computer models:

  ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (TLC)

  ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (MLC)

  The SSD you want to upgrade to, does not seem to be supported by your motherboard.  From my understanding, if the SSD is supported, then you should be able to boot from it.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Memory replace on HP ENVY M7-K111DX

  Laptop HP ENVY M7-K111DX that I intend to buy is currently sold at best buy with 12 GB of RAM.

  Is it possible to swap the existing 4 GB RAM with a 8 GB?

  the reason why I want to get it confirmed that a gentleman at the store said, it is possible and another said that the RAM is merged to the motherboard and cannot be done.

  Hi aj250037

  Integrated is the processor, the chip and the video memory, RAM has 2 slot.

  Printed circuit board 786430-501MOTHERBOARD DSC 840 M 2 GB i7-4510U STD for BBY

  http://PartSurfer.HP.com/search.aspx?SearchText=G6U51UA

  Memory SODIMM slots two
  Support of the DDR3L - 1600 MHz Dual Channel
  Supports up to 16 GB of RAM in the following configurations:
  ● 4096 MB total memory (4096 × 1).
  ● 8192 MB total memory (4096 × 2)
  ● 8192 MB total memory (8192 × 1).
  ● 12288 MB total memory (8192 × 4096 + 1 × 1)
  ● 16384 MB total memory (8192 × 2)

  http://h10032.www1.HP.com/CTG/manual/c04434142.PDF

• Mk-111dx ENVY: you can upgrade graphics ENVY m7-k111dx

  I wonder if I can update my m7-k111dx WANT higher then the 840 m NVIDIA graphics card, if so, what is the best graphics card I can use.  IM also want to know if I can use two hard drives in my laptop

  Here is the Service Manual:

  Manual

  There is a single location for a regular full size SATA HDD. However, you can add a hard drive giving the DVD drive and use of an adapter. Or, there is a slot on the motherboard to a hard drive of the MSSD m2 but installing a drive it takes serious disassembly.

  It is a version of the motherboard with 850M 4 gigabytes video but to get it, you will need to find one of these motherboards and replace it for you. Once again, a very difficult and costly process.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• M7 k111dx: supposed weird graphics bug after update to windows 10

  I upgraded to Win10 on day 1 and thought that everything was ok. Then I closed my computer and made after the drive hard light off, the power lights could not do the same thing. I had to make a "force stop" making them to extinguish. Windows don't think I did a force stop. I'm not sure what is the cause, but I would be really nice to fix. "Sleep" mode is also affected by this. "Sleep" mode is more annoying to get out of because it requires a judgment of strength to wake the computer. Windows recognizes it as such. One interesting thing I found out is that if I press volume up and volume down at the same time, the screen goes black for a second and then turns back on. It is followed by a beep. Since my laptop has a geforce 840 m in addition to the integrated graphics, I think that I spend between 2. It is of relavent because only the settings makes the light off when sleep and stop. I've updated my integrated and discrete graphics card drivers and it made this bug seems less random. (when I discovered the volume button thing). I have no way of knowing what GPU I use, but it's really important, as force stops really slow down my progress when you work. All accepted solutions.

  Hello @ethandrzb,

  Welcome to the Forums of HP Support!

  I read your post about the question of sleep mode and wanted to help you!

  Try to revisit these steps, by community member @DanG82, to see if the problem can be solved.  Please post back with the results:

  HOW TO SOLVE THE PROBLEMS OF SLEEP/SHUTDOWN

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  Source: How to solve the problems of upgrading 10 subsequent to Windows on HP laptops

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• M7-K111DX: need Windows 7 64 bit drivers for laptop HP-M7-K11DX

  I had to reinstall Windows 7 Pro complete with a valid product key. However, Windows 10 was loaded before, so the drivers are not compatible. HP does not provide drivers for this model for W7, only 8.1 and 10.  I miss several pilots and have found no legitimate source to download.

  Is there anyone who can tell me where to get these drivers online from a legitimate source?

  Thanks in advance.

  You are the very welcome.

  See if your laptop is a BIOS setting for USB to act as auto or emulation USB2 ports.

  You will not be able to install all drivers unless you can read the USB key.

  The other thing you can do is to run this tool on your installation of W7 media and reinstalling W7.

  This tool should load the usb drivers 3.  There is a Readme on the link to find out how to use.

  You must run the tool on a PC with W10 or W8.1.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• HP laptop PC M7 Envy: Replacement of keyboard HP Envy M7-K111dx

  Hello!  Anyone know where I can find info on how to replace a keyboard on a laptop computer HP Envy M7?

  Hello
  
  Go to Page 48 to 50 in the manual of your product for the replacement procedure - keyboard comes with the topcover:
  http://h10032.www1.HP.com/CTG/manual/c04434142
  
  Concerning
  
  Visruth

• M7-k111dx boot (best buy) want MSATA?

  I'm assuming from the doc here...  http://h10032.www1.HP.com/CTG/manual/c04434142.PDF

  This model has in fact a buried MSATA port here.

  If so, he will start her with a (wiped) standard sata drive installed also?

  I read some conflicting info, but none of this on my specific model.

  I have an ssd standard 500gig I can use, but I prefer to put an MSATA SSD of 500gig

  in and retain the (slow) included drive 1 TB of storage.

  Thanks for any input.

  What, p. 72 and then here is the part number:

  766593 001

  TI year m2:

  http://www.dectrader.com/766593-001-new-HP-SSD-256GB-m2-SATA-3-MLC.html#.VI98gCvF-TM

  A m2 is always a type of mSATA