K3 Note connection to the tv via a usb cable.

Similar Questions

• Could not connect to the internet via a USB Modem

  Could not connect to the internet via a USB Modem from my Nokia 6275 CDMA phone.

  Windows vista detects my phone connected via Nokia PC Suite via USB cable, but I couldn't connect to the internet using my phone as a USB modem dial. However, I am connected to the internet through the same dial-up access when I use bluetooth to connect to my phone as a modem. Please give me an emergency solution. I'm using windows vista 32-bit edition. It's windows vista Home premium.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  And contact the technical support of Nokia: http://www.nokia.com.au/get-support-and-software/download-software#.

  See you soon.

  Mick Murphy - Microsoft partner

• I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

  Original title: deleted Ethernet adapter

  Hello

  All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
  I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
  First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
  I tried to insert Dell drivers and utilities disk, but that does not change.
  I tried to download on an other computer files from dell that look like they are pilots.
  I tried to set up a new connection
  None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
  Thank you
  Kevin

  Hello

  1. what you're trying to fix by running registry cleaners?
  2. How did you remove Ethernet card?
  3. How are you online using other devices?
  4. What are the devices are?

  Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

  We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

  SlaKir wrote:

  The answer is YES

  Well, then your USB port is likely.

  Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

  Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

  Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

  Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

• Solaris - Oracle10g - could not connect to the database via the application...

  Dear people...
  
  I am facing a problem trying to connect to the database via the application...
  
  This was not the case previously, that something was wrong after the installation of the application.
  During the installation of the Application, I had specified the database/SID as "wind".
  The application works well up to 10 days, when there is power failure.
  
  Resumption of food, I started the server Solaris (Sparx).
  Then started to oracle and listener.
  And when tried to start the application could not succeed.
  
  An error in the application log file:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 error: 2: no such file or directory
  
  Then follows things:
  -------------------------------------------------------------------------------------------
  $ su - pdmorcl1
  Password:
  Sun Microsystems Inc. SunOS 5.10 generic January 2005
  
  bash $
  
  bash-3. $00 sqlplus "virtue sysdba".
  
  SQL * more: Release 10.2.0.1.0 - Production on Thu Oct 21 10:57:16 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Connect to an instance is idle.
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 1258291200 bytes
  Size bytes 1978336 fixed
  218107936 variable size bytes
  1023410176 of database buffers bytes
  Redo buffers 14794752 bytes
  Mounted database.
  Open database.
  
  SQL > exit
  Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  
  departure from lsnrctl bash-3. $ 00
  
  LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on October 21, 2010 10:59:02
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  From /d32/pdmorcl1/product/10.2.0/Db_1/bin/tnslsnr: Please wait...
  
  TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
  System settings file is /d32/pdmorcl1/product/10.2.0/Db_1/network/admin/listener.ora
  Log messages written to /d32/pdmorcl1/product/10.2.0/Db_1/network/log/listener.log
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))
  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ffnew.ffpl.com) (PORT = 1521)))
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  For Solaris TNSLSNR version: Version 10.2.0.1.0 - Production
  Start date October 21, 2010 10:59:02
  Uptime 0 days 0 h 0 min 0 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /d32/pdmorcl1/product/10.2.0/Db_1/network/admin/listener.ora file
  The listener log file /D32/pdmorcl1/product/10.2.0/Db_1/network/log/listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ffnew.ffpl.com) (PORT = 1521)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  "Wind" service has 1 instance (s).
  Instance of "wind", status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  bash-3. $00 pdm90/pdm90@wind
  bash: pdm90/pdm90@wind: no such file or directory
  bash-3. $00 sqlplus pdm90/pdm90@wind
  
  SQL * more: Release 10.2.0.1.0 - Production on Thu Oct 21 10:59:51 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  SVR4 error: 2: no such file or directory
  
  
  Enter the user name: pdm90
  Enter the password: pdm90
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  
  SQL >
  --------------------------------------------------------------------------------
  
  Now, I'm very new to the world of the Oracle...
  I'm stuck here in the last 10 days...
  
  Does someone can give solution to this problem...
  
  Thanks in advance...
  Kind regards
  Manish

  Hello

  ORCL:/D32/orawc/product/10.2.0/Db_1:N
  Oracl:/D32/orawind/product/10.2.0/Db_1:N

  
  testwind:/D32/tstuser1/product/10.2.0/Db_1:N
  pdmorcl1:/D32/pdmorcl1/product/10.2.0/Db_1:N
  Wind:/D32/pdmorcl1/product/10.2.0/Db_1:N

  So now, I think that problem is some hand if environment variable at startup of the database. oratab files sows that you have multiple homes of oracle on your server
  1 /d32/orawc/product/10.2.0/Db_1
  2 /d32/orawind/product/10.2.0/Db_1
  3 /d32/tstuser1/product/10.2.0/Db_1
  4 /d32/pdmorcl1/product/10.2.0/Db_1

  Your environment variable must be set correctly when you start the database so that it starts from the good House. Listener could run from any head of mission and your database can register automatically. For your particular case, you should and environment flow as follows and it should work for you

  export ORACLE_HOME=/d32/pdmorcl1/product/10.2.0/Db_1
  export ORACLE_SID=wind
  export PATH=$ORACLE_HOME/bin:$PATH
  

  After setting your environment like that, now you conect 'as sysdba' and startup of the database (I think you know how to start the database. If it is already started, stopped and then start early). Now your database said the correct House

  Now you pasted above your tnsnames.ora file. Should the tnsnames.ora file $$be to the following Director (in the current home you above)

  /D32/pdmorcl1/product/10.2.0/Db_1/network/admin

  Now you try to connect you wanted. To make sure everything, also stick out now in the course of execution of the command line

  which tnsping
  which sqlplus
  which lsnrctl
  

  Salman

• How to transfer pictures from the phone to the computer via a USB cable?

  I just bought a Tundra VA76r and universal mini-USB cable at a local store AT & T. I downloaded the "v3.9.0 USB driver for Windows 32-bit" on the Motorola support site, I have Windows XP SP2 on my desktop Dell. The driver is described as follows:

  This USB driver is used for connecting your Mobile from Motorola phone to a Windows® computer via a USB cable to charge your phone or to access the data on your phone. This USB driver supports most Motorola OS, Linux OS, Motorola, Motorola iDEN, Motorola Symbian/UIQ, Motorola Windows Mobile® and i-mode of Motorola phones.

  I installed the driver and the load function works. My phone USB connection type is MODEM. However, I am not able to "access the data on my phone" as promised in the description of the driver. The phone is not recognized in Windows Explorer. All I want to do is to transfer pictures from the phone to my computer. The price for Motorola Phone Tools ($50) seem expensive for such a simple task. An adapter for my desktop computer bluetooth is also in this price range. The tundra is incompatible with the feature of this driver? I'm doing something wrong with the installation of the phone? Please help me to get the driver to work... Thank you

  Best way to do this is to configure your phone USB setting of "memory card".  Go to Menu-settings-connections-settings USB online online online, select the memory card.

  Once this is done, connect the phone to the computer, phone will be recognized as a removable disk. Go to my computer.  Under devices you'll see removable drive F or G depending on your drives (can show two if you have a card as well.  Memory card is usually the drive at the top of the page.  The phone memory is lower by car).

  Click on the drive (IE. F, mobile - if memory card).  Here you will see audio, music, photo, etc.  Once here, you can get, drag and drop a file on your computer.  Make sure that you create one or more folders for your files on your computer.

  The same also applies if the transfer of files from your computer to your phone.

  I find that this method is better than to sync the phone.

  I hope it will work for you.  Let me know if it doesn't.

  EROD

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!

• HP psc 5520 does not connect to the computer via the wireless

  Hello
  Recently I have not been able to print or scan anything using my laptop.

  Laptop computer and printer are connected wirelessly to my home network but when I try to set up the printer with a wi.fi connection, the laptop computer does not find the printer. I tried to do it with the hp software and windows options.

  If I connect the printer to the laptop via USB, everything works fine.

  The printer is only 2 months old and I'm getting a little frustrated, I'm totally lost here.

  Please help me

  If you need more information just ask.

  Thank you very much for this information.

  Were you running a power cycle on your router, the computer and the printer? Still, the IP address is all zeros? Please let me know!

• My new Inspiron one 2020 does not connect to the internet via ethernet.

  I have connected my a 2020 new victory 8 to our office via a network cable and the following occurs: Broadband connects to the router, but not internet access. I can reach our router and see the router configuration and status screens, but not the internet.  The rest of our office has perfect internet access. I tried two calls to support, and abroad, people insist that they go through their material problems even if the network adapter works obviously.  I suggested that it was probably a problem of windows security, and they said to reinstall windows.  Very frustrating.  Any help out there?

  I finally got internet connection ignoring suggestions from tech support and following my instinct that he was related to security.  First, I removed the McCaffy and turned off the windows firewall.  Then I crossed the ip configuration for the 6th time and ended up dhcp and my dns settings in tcp/ip to work and I had internet.  Firewall turned on him again and consider using Windows Defender.  I complete installation tomorrow after that updates Windows Update are downloaded while I'm resting.

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• Satellite C660 now does not connect to the printer via Bluetooth

  I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

  Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

  Any ideas of solution?

  Hello

  From this point it's hard to say what's wrong.
  In my opinion, you must reset all settings and configure the connection to the printer again.
  Reinstall the software that you have installed in the past.
  Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

  Since your laptop can connect to the internet properly, it cannot be a laptop problem

• Tecra M2 - not connecting to the internet via WLan and Win 2000

  Recently got Tecra M2 working under windows 2000 after the help of this forum. - jarviei post.
  I had a problem with the Intel pro 2200bg Intel wireless card type.
  The unit was able to provide info when right clicking the device in Device Manager, a report of the "State of the unspecified device" or similar has been posted.

  I removed the drivers and used an older version that cured this problem.
  To driverguide.com: intel_proset_9020tic_97904.zip
  But I can still access internet t.

  I can connect to the router wirelessly with the connectivity of 100% but that s where it stops. I use the wireless LAN hard wire disconnected.

  Using the Toshiba connectivity doctor using wire hard watch my laptop connect to the router - it shows as a hub/bridge and then connection goes ot to the internet.
  When I use the wireless radio icons show the laptop to the router but no internet connection.
  The router shows as an ad-hoc connection, almost as if he sees it as another pc.

  How and where can I set the machine to tell him to serve as a gateway/router to the internet in the wireless?

  Thanks in advance to all who help.

  Great news!