K410 USB DOES NOT START

Similar Questions

• SSD external via USB does not start by default

  Hello Apple community.

  I have a problem with my new external SSD. Given that the base model Mac Mini end of 2014 comes with a disk HARD 5400 RPM drive, I wanted to go to an SSD without having to tear the whole unit. I wanted to exhaust the option 'boot from USB' and I'm having a strange problem. I cloned my Mac to the new drive SSD and slapped in a box set of the speaker. I connected via USB and changed my 'startup disk' to use the external SSD drive. However, it does not start on this unit automatically. When I reboot and discovers the "boot manager" I see the USB being initialized automatically. After disconnection / re - plug the drive in, it appears as a boot option. Once it is initialized, everything works fine and I can boot into El Capitan without any problem using the SSD.

  I am trying to find a way that I can get the Mac to initialize the SSD to the boot upward and choose default. I don't want to have to re - connect the drive whenever I want to start on the SSD drive... Any help and suggestions are greatly appreciated!

  My equipment

  ===========================

  Model Base of Mac Mini (end of 2014)

  1.4 GHz Intel Core i5

  4 GB of DDR3 1600 Mhz

  OS X - El Capitan v 10.11.3

  240 GB SanDisk SSD more - connected via USB3.0

  What unit do you use for the SSD?

  Can you provide a link?

  If the SSD is delivered with a box to provide a link to that,

  How do clone you for the SSD? What app did you use?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Function USB does not start

  VMware Workstation 7.0.1 build 227600

  Host Windows 7 64 bit

  Windows XP Prof 32-bit virtual MACHINE

  Failed to start the Service of USB.

  What can I do?

  I had the same problem and only this article helped me:

  http://thecompudoc.blogspot.com/2008/12/host-USB-driver-problem-of-VMware-on-HP.html

  The problem seems to be that VMware does not work with the AMD USB filter driver. I followed the steps in the article to find the Setup.msi file in the hidden folder, which I ran for uninstall AMD USB filter driver. After that, VMware and USB worked like a dream

• Flow 10 7 HP - Windows does not start, I can't get into recovery 8.1 because cannot boot from USB-HELP Please!

  Hi all, I'm new here!

  I am (excuse me: has) with a stream 7

  A few days ago, I tried to install Windows 10 TP renovation 8.1 with Bing. After a while of waiting, he managed, but unfortunately I have forgiven to in SSD Tablet hp drivers, thinking that they were not necessary. If the touchscreen, WiFi and all the other stuff has failed. After I've got collegated by OTG, a keyboard and a mouse, that I managed to use Windows 10.

  Try to install the drivers, my fault, I opened a .exe from Realtek (perhaps for audio), Tablet asked to reboot and after that I can't access Windows anymore.

  I tried to start Windows 8.1 from a USB key, but it does not start, the same even if I disable secure boot.

  With disabled bitlocker Windows gives this error

  

  In the start option, I set these settings

  

  I put the USB in this way:

  

  The stream does not consider the USB absolutely XD

  If I turn on again the secure boot Windows gives this error (which 99% is caused by the .exe I installed):

  

  Restart the flow some time with secure boot it goes in a menu (where touch screen works) where there are a lot of options to reset Windows, but none of them doesn't work. If I try to format in this menu it asks password for my account, but it does not accept the mine :/

  If I try to open the collection (from volume button when it starts less) it gives this message:

  

  Waiting for relief,

  Thank you for your patience!

  @fotogruia in my case, the indicated operating system was windows 10 and as I wrote it has worked well. Good luck!

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite C660 does not start on disc or USB

  My Toshiba Satellite C660-DSC0QE app, BIOS version 1.80, will not start Windows more - it just goes to the dreaded black screen with white cursor.

  I tried a system Win 7 recovery disk, a USB with software from Kaspersky on her recovery and even a full Win 7 installation disc, and it does not start at one of them.

  The boot order is set correctly, (optical drive or USB port) devices are read, but their initialization never actually in them - there is an obscure error message, or it acts like they weren't there at all.

  The obvious answer to these forums seems to be disable secure boot mode and then switch the to the CSM UEFI boot mode. Easier said than done - the menu options don't exist at all in my BIOS/CMOS screens.

  Finally, I see no way in the instructions to get a BIOS update occur without being already in Windows on the PC - http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm I'm assuming that the BIOS version 2.00 would have these options.

  Any help gratefully accepted!

  Hello

  I assumed that you have a white blinking cursor in the upper left corner.
  Is this correct?

  These symptoms appear where the system can not find a boot device (HARD drive) or memory problems (RAM module).

  First of all, you said that you have UEFI / CSM boot mode in the BIOS settings.
  So I m asking you what parameters of start mode appear in BIOS exactly?
  Find you these settings in the right area?
  Usually, you should have an area (tab) called security in the BIOS.
  In most cases, you will find a safe boot option, but the Satellite C660 does not support this option because it s too old.
  But the startup mode (UEFI /CSM) should be available in the BIOS. Check the settings in the BIOS of the system area

  Anyway, as I said above; It could also be a memory problem, so I recommend you to check if the memory is OK.

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• 2006 iMac does not start. Help restore

  I have an Intel iMac core duo with iSight and built in disk drive around 2006. It does not start.

  When I turn on, it sounds and passes to the gray screen with the apple logo and a progress bar or a spinning wheel. Then he stops down. I tried all the troubleshooting and nothing works. In addition, I don't have the disks that originally from cane with the computer. So I can't make a diagnosis of the hardware. (Unless someone is willing to sell me their album hehe).

  This problem happened to me in 2012. I had a friend restore the computer to empty the hard disk, then boot from the snow leopard disc and reinstall everything. It worked like a charm.

  In 2013, a disc is stuck in the drive. I have troubleshooted only and nothing has worked. I assumed that the drive is dead and has continued to use the computer without worrying about that. Then, in 2014 someday when I restarted, the disk jumped! I never tested the drive then because I was afraid of another stuck disc. Then, the computer is dead again as he did in 2012.

  SO I know what to do. I need to wipe the hard drive and start over. However, I didn't have a drive. So, I bought one on eBay. When I insert it, the computer enters the disc. I can hear the mechanics works. It ejects even properly. However, I can't boot from the drive. When I start the iMac by pressing option, I don't see the Macintosh, no disk drive.

  My hard drive died? If so, a USB dvd drive would work? If USB does not work, how can I replace the drive?

  Is it possible that I bought a drive bad or fake software and that's why I can't boot from the dad?

  Please help in some way!

  Try a boot sure try safe mode if your Mac does not end commissioning - Apple Support

• MacBook Pro does not start, the screen is pixelated.

  MacBook Pro (2011) running iOS later.

  Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

  Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

  Looking for ideas before making a trip to the Apple store.

  1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

  2. start in safe mode

  3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

  4. find the missing table inception report and post it please

  If your Mac will not turn on - Apple Support

• MacBook Pro does not start safe mode or recovery mode without start up

  I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Still 2 WT10 does not start

  Hello

  My Encore 2 WT10 lights. I updated the bios to 1.4 via the USB port. It does not start after the upgrade. The screen remains black. I can load and reload my mobile phone via the tablet or a USB Hub to power. If I press the button for 30 seconds, turn off the USB device, press the button again turns on USB power. But the screen stays black, no screen BIOS or Windows, no audio or USB data connection (or other signs of life).

  I think that my tablet is in soft-power-off mode. How can I hard-power - off the shelf without removing the battery internal?

  Try to open the BIOS/UEFI tablet settings by following these steps:

  Press and hold the volume button at the same time by pressing the button for a few seconds. Ideally, this will open the screen of the BIOS/UEFI. Once this is done, make sure that the settings are correct or restore the factory settings.

  If that does not help, then additional assistance may be required.

  In a similar way a lot, the splash screen appears where you can recover your tablet from an image that you created previously (recently) or in the worst case, reinstall Windows.

  Also keep in mind that between reboots, a 10-15 minute interval may be required (don't know why, but it helped me dealing with errors in the past).

  My impression is that the BIOS 1.40 was already installed in the WT series, so some models have been improved to 1.60. BIOS should normally updated via WIndows Update or Toshiba service station.

  Hope this helps

  BR

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive