K550 color yellow does not it tends to green

Similar Questions

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!

• my color resolution does not work can you tell me how to fix it?

  Hi my color resolution does not work its blurry can you tell me how to fix it? Ty

  Hello Andrea,

  First, what operating system are you using?

  Second, how many time that there a problem?

  Was anything changed on your system before to happen began?

  Finally, you have the latest updated drivers for your video card?

  Eddie B.

• Color picker does not work in Windows media player 11

  color picker does not work. The frame color is red and there is no way to change.
  I tried with uninstall and re install, however the problem still exists.

  It seems that your WMP is in skin Mode. You can switch to full mode CTRL + 1 or Ctrl + M in WMP.

• When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Color problem

  When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Problem with the video card, cable or tv.  I will try to update the video driver first.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• New color cartridge does not work

  I have a longer printer hp psc 1210 and never had any problems until recently.  I ran more ink color and black print just for a few months, but now that I finally bought several cartridges color it does not print colors and I get an error message saying that the tri color cartridge is not compatible.  I checked and this brand is compatible with my printer, I tried to take the cartridges out and put them back in and unplug the printer.  I tried to clean the electrical contacts, and always the color will not print.  I even bought another another brand color cartridge and tried and still no luck! What can I do else?

  I understand that you get an error of ink cartridge rejection. I would like to look at this document here the addresses of ink cartridge for your printer errors. It will show you how to remove and inspect the cartridges with the printer disconnected. It will also show you how to clean the cartridges and the printer falls. Since you mentioned that you cleaned the contacts on the cartridges. compare the methods you employee against the instructions and make sure to follow with the falls of the printer in order to ensure that all the build-up has been removed from cleaner. I hope this helps.

• I have cs6, when I try to use channels to hide every time I choose one of these channels, the peak towers all this color, it does not appear in black or white.  Why?

  I have cs6, when I try to use channels to hide every time I choose one of these channels, the peak towers all this color, it does not appear in black or white.  Why?

  It may also be that in the Photoshop (Edit) > preferences > Interface you can view layers in colors checked.

  

• Why color Temp does not use theory standard blackbody in lightroom?

  Hi all, I would like to ask a question. Why the temperature in Lightroom does not use theory standard blue witch bsigns black body for higher values and the red ones for lower values on the kelvin color temperature scale?

  I'm not a novice and a motion graphic designer and 3D generalist and I do not understand why the Lightrooms does not use the normal scale. You go to a 3D ap and if you are familiar with lightroom you will have some problems whit lighthning because in all the 3d points and from what I've seen other counters aps use the kelvin color temperature values, higher values are asigned to blue spectrum. For example, with a bulb (D65) of natural light has a value of 2700 Kelvin is the red color red but in lightroom is on the opposite side and 2700 you have a tint of blue. I personally find very annoing this approach and I would like to ask Adobe if they could put an option to change the color temperature scale Kelvin standard.

  Thank you

  http://en.Wikipedia.org/wiki/Color_temperature

  Cursors do not set the light black body temperature, but compensation requested the image to compensate for the temperature of the black body of light.  This is going the other way.

  If a picture is taken in tungsten (light that is yellow-ish), we always want to look white 'white' when view us on a screen (as our eyes compensate for the color temperature of the ambient lighting).  To adjust to the lighting low temp black body (i.e. yellow-ish), so we want to make the image more blue, so it does not yellow.  Until the lower part of the blackbody temp lighting (i.e. more yellow enlightenment), the more blue the compensation that we must apply.

• Color ink does not work. Black is working I have a hp C310a.

  I have a HP C310a photosmart printer.  She needed a black ink cartridge.  I put it and it works fine.  But now the color inks do not work.  Grayscale is not verified.  Color is verified.  I ran a diagnostic page and it says that everything is good.

  Hi hsrmom,

  What color is not printing? (Cyan, Magenta or yellow)

  Try the procedure described in the document at the link below.

  Troubleshooting print quality problems

• MG5320 yellow does not print

  Hello

  My printer has stopped printing the yellow cartridge always. The cartridge is almost full. I did a cleanup and a thorough cleaning and aligned automatic print head a couple of times. The nozzle check page does show no yellow but everything else is fine.

  Ideas?

  Michael

  Hi graywolf28,

  As cleanings and alignments did not get yellow ink to print, remove and reinstall the ink tanks and print to the printer head, ensuring that all bands who may be staying on the ink tanks has been removed and put them all in the printer.  If the ink still does not print, the printer will require maintenance.  Please call or write to us at one of the methods on the contact us page to get your service options.

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Color profile does not

  Hallo,

  I have a question for a color profile that I installed in my new Imac with spider 2 and color eyes display pro1.52 r036 software.

  the thing is is works on the programs of intelnal as preview very well.

  But in Adobe photoshop CC2015 it does not work well.

  The colors are perfect, but the contrast is not good, but the contrast is completely different from the other program as a preview.

  The black level is not good.

  I try to restart Photoshop and the Imac several times but no result.

  When I use the default color of Apple profile then the black level is the same with any program.

  I know spyder 2 and color eyes display pro 152 r036 is old hardware and software, so that could be the problem but I'm not sure.

  Any help or advice is welcome.

  Thank you

  Richard

  
  

  The Spyder 2 has never been very reliable in the first place and it is basically useless on modern LED and variety shows.

  You really should get a current sensor. Later generations of Spyder (3 upwards) are much better, but if you want the best sensor there is no way around the i1 Display Pro. It is more or less the standard of current industry (except for some extremely expensive instruments). The ColorMunki Display uses the same material, but paralyzed in many ways.

  ColorEyes software is good, used to be the best third party software. It is probably best to x-rite or software Spyder. But I've seen problems reported with recent versions of OS X. I don't know if ColorEyes is updated more or if the company is still in business at all.

• Color profile does not match the RGB workspace

  When I tell LightRoom to edit my photo in Photoshop CC2015 I get a message saying that the document... has an embedded color profile that does not match the current RGB workspace"

  It gives me the choice of these three options, and I usually choose the Middle "convert the colors in the document to the workspace.

  This mismatch between Lightroom and Photoshop is intentional, or y at - it an option or another that I have not set correctly?

  You must set the color management policies to keep profiles incorporated under Edit > color settings.

  Images from LR in the ProPhoto color space and must be kept that way.

  What you do now is throw information, when the large ProPhoto space is converted at least Adobe RGB or sRGB even smaller.

  

• CC of Dreamweaver (2015) - color chart does not spell insert or an RGB value in the CSS file?

  When I use the color picker Eyedropper to retrieve a color from a CSS file screen, by clicking on the color closes the dialog box but does not insert the color.

  Suggestions?

  It sounds as if you use the selector of color in Code view. In Code view, Dreamweaver expects you can enter the value manually. Use the pipette from the creator of CSS.

• Definitions of color display does not scroll

  I am trying to solve some errors of incompatible color definition

  I used the file > import > colors that solves a large number of them

  but there is one that I can't even view them in a file that is complaining about this

  and I can't use the view > color > definition to remove

  Since the menu drop-down does not scroll I can't what to expect, it's a more complete list of colors for this file

  Name: drop-down menu arrow to scroll, but clicking on it brings color to the arrow that he not more colors

  The answer was shown to me through a cat from Adobe Support.

  Of all things, he must use the arrow keys on the keyboard to scroll through the list of definitions of color. The mouse does not have to scroll.