KB2289158, KB2443839 and KB2413389 updates require reboot after installation?

Here are the updates for Office 2007

Is the computer must restart for these "set up"?

No, the useless Office updates a reboot. A reboot is required only WindowsUpdates when files are in use. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Tags: Windows

Similar Questions

  • When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

    When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

    Hello
     
     
     
    1. how you try to install Service Pack 2?
    2. are you able to boot to the desktop?
     
     
    Method:
    Step 1: If you are able to start the computer in normal mode, then try a clean boot.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135
    Please note: after troubleshooting, start the computer in normal mode.

     
    Step 2: Try to install Service Pack 2 manually.
     
    How to obtain the latest Windows Vista service pack

     
     
    If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
     
     
     
     
    If you are unable to install Service pack 2, you can consult this article.
    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358
    Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.
     
     
     
     
     
     
     
  • Windows not loading after system reboot after installation of the last security update.

    Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

    No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

    Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

    Dated this February 11, 2010.

    I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

  • Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    * original title - I'm having a problem *.

    You have the latest drivers?
    http://www.nvidia.com/page/support.html

    Aero - Windows 7 - How to troubleshoot problems with Aero

    (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

    (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

    (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

    (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

    If it does not---> click Start---> right click computer---> click Properties

    Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

    Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

  • I bought the first 13 items, I have the CD and the number series, but after installation it always tells me, it wasn't an original Adobe software

    I bought the first 13 items, I have the CD and the number series, but after installation it always tells me, it wasn't an original Adobe software. However, it is! I have not bought a second hand version or whatever it is, it's new and I haveen can't installed the software on any other PC. What can I do?

    Warning: "Adobe software real failure of Validation...". » | Windows

  • The fan works like a crazy and super fast drain battery after installation of Sierra

    I installed Sierra on my MacBook Pro, the fan works like crazy and the battery is empty after about 1.5 hours. Which never happened before. I'm only using Safari and Mail in the moment. I talked to Apple Support and they suggested to reset the SMC, but this brought no improvements. What can I do else? Again, I plan to install the El captain...

    I had this problem just after I installed Sierra on my MacBook Air.  First I tried to reset the SMC and the LANDAU.  This does not prevent fans constantly in the course of execution.  I then used the activity monitor to see what was possibly strain my system.  I noticed the "DCs" process was always sucking up to more than 90% of my CPU usage.  However, others said that it is normal after an upgrade of the OS and it should fall back down once the computer finishes its initial picture and analysis of the files.  So I run my MBA plugged nonstop for 36 hours in a row and the fans just kept running so that the process of "DCs" continued to drain at > 90% of CPU usage.  I also looked carefully at the activity monitor and saw that tasks such as analysis of photos had their own separate process "DCs".  So I dug further into what the devil "DCs" was really do with a lot of CPU resources.  Long story short, I found that there is some glitch in Sierra which causes the macOS stuck on a process involving the keychain and iCloud.

    That's what I did to fix this keychain/iCloud which led to "DCs" fans of triggering and overloading the CPU to be always on:

    -In the activity monitor, I used Force Quit to kill the process that involved the keychain

    -In the activity monitor, I then Force Quit the process that involved icloud

    -In activity monitor, I finally Force closed the process "DCs". (I found that I could not simply force quit 'DCs' without first allowing the keychain & iCloud first)

    -After all, I restarted the computer and fans were finally off the coast!  I open the activity monitor and saw that 'DCs' has is no longer hogging up the CPU usage.  Photoanalysis process were still running in the background at 40-50% CPU use with no trigger unwanted system fans.  the iCloud synchronization and my keychain also worked very well.

    I'm finally able to use Sierra without my fans blazing out of control.  It took me a while to get this sorted out.  Hope this helps to save you a few headaches and time until Apple can get counts that there is this Sierra software glitch they need to address.

  • can change uid and gid of oracle user after installation of 11g rac

    can we change after installation of 11g rac oracle uid and gid in 11g RAC. ?

    Thank you
    Boucetta

    Read this
    It is supported to change Uid/Gid of the owner of the Oracle database software after Installation? [1474891.1 ID]

    * "It is not supported to change the UID/GID of the owner of the Oracle database software after installing". * "

    Please don't forget to close your message, you got your answer :)

  • application manager does not open and cannot update required adobe programs, after the messages displayed

    Adobe SpeedGrade CS6 6.0.4 update

    There was an error downloading this update. Quit and try again later. Error code: U43M1D207

    Adobe Audition CS6

    There was an error downloading this update. Quit and try again later. Error code: U43M1D207

    Prelude CS6 update 1.0.2

    There was an error downloading this update. Quit and try again later. Error code: U43M1D207




    Ive tried to stop and not restart no difference

    Error 201 & 205 & 206 & 207 or several U43 errors

    -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

    The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

    Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

  • How to make my application requires a reboot after installation?

    My apps are around a year now and I realize that they do not have to restart the computer after the installation or update. So I get some customers complain that it does not work so I advice to restart and it solved their problem.

    I don't find in the deployment descriptor. Can someone please help me find the way to do it? My apologies for my ignorance.

    The BlackBerry Smartphone should automatically prompt the user if a reboot is required.  Your application has no need to specify anything to achieve.  The following article explains why a reboot is required.  Your application falls into any of these categories?

    The reason why a reset is required when upgrading an application

    http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-reason-a-reset-is-required-when-up...

  • Windows vista 64-bit crashing into the screen blue and often impossible to reboot after crash

    My windows crashes constantly everytime I try to watch a video or go to a page with java, if I try to install the new version of Adobe, it stops it's self down and do not restart, just it becomes black and stops.  I pay for membership to netflix and I can't even watch a movie. I go on youtube it crashes, I'm trying to play farmville on facebook, he crshes... in a blue screen and this is what I get when I start it again:

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8006F77030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini071911-04.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-85098-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WER26A2.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    July 20, 2011 Crash, 6 times

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA80070B6030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini072011-01.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-144456-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WEREBE4.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    July 21, 2011 breaks down, 4 times

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8007066030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini072111-03.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    July 22, 2011 crashed 7 times

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6001.2.1.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8007066030
    BCP3: 00000000B 6000000
    BCP4: 0000000000000181
    OS version: 6_0_6001
    Service Pack: 1_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini072111-03.dmp
    C:\Users\DrGraceG\AppData\Local\Temp\WER-57470-0.SysData.XML
    C:\Users\DrGraceG\AppData\Local\Temp\WERC13B.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Many many people have this problem when I talk to others. Miscrosoft compromises our computers so we would have to buy new ones?
    They know there is a problem and they don't even try to find a solution for this. In this economy, they force people to buy new computers, they will just leave people blocked company becase NOBODY takes the phone, if you do not have email, people don't keep in touch, if you are not on a social network or business networking nobody will know your business, you won't make any money nobody reads the ACTUAL newspapers these days, everybody reads the news on the internet. They only hurt people, they are forcing anyone to buy a new computer, people just can't afford it. Hundreds of thousands of people can barely keep their utilities on. In doing so I wish they will reconsider. I am disabled I will definitely cut if my computer goes down for good.

    Can we do any smell that?

    There are also a lot that I need to run startup until the restoration. Windows restarts after the crash of the blue screen, I reinstalled windows twice, it works fine until I have start to install all updates. I have only installed MSE and it still happens. I lost all my music I paid a lot of money for, my paintings for children, important documents, all because I had to reinstall windows twice now.  I may have to reinstall them once more and I do NOT wish to install the updates again. He really never stops until I installed updates to windows. I thought that if I use the programs from Microsoft that it will work, because after all, it's all done by the same company, but no, nothing works. I am so in the sincere real despair. Be alone without technical skills, hardly what actually on my disability check, now I'm going to cut everyone. Now I can't do ANYTHING without it crashing, nothing fun anyway. I tried Microsoft fix, I tried so many solutions. I paid for Adobe photoshop, because I like to draw things and I'm terrified to install it. I'm afraid to do anything fun or useful on this computer.

    If I can afford a new computer at any time, I think I will try Apple, I lost my trust in Windows. Unless they make an effort to solve this problem, then I would give them a chance again, but not if they will try to help. I'm so frustrated. I spend a lot of money on this computer, it's an ENTERTAINMENT laptop and I get not very amused.

    What is going on?

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way? Heat associated
    does not necessarily mean excessive heat, it could be something is too sensitive to the same
    normal levels of heat. Also a computer will produce more heat as is pointed out how adding
    software or updates, among other measures, causes it. Of course those actions should not
    cause enough stress or heat to shut down the computer.

    For a laptop on everything that you can do is reinstall the memory and clean the ventilation openings (still may try to add
    a small fan as a test). Of course first remove all power.

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    ===========================================================

    Check this thread for more information on using BlueScreenView, MyEventViewer and other
    Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    BCCode: 124 0 x 00000124

    This is usually heat related, faulty hardware, memory, or processor even if it is
    "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
    and cables (at both ends) - actually delete and replace - are not just tight. Ensure
    the system has proper ventilation - add a small fan blowing in the contributions. Carefully
    Inspect the card mother and other cards for damage. Pay attention to the fatal material
    error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
    or other BigBox stores) or system manufacturer support.

    There has been a few cases where Norton/Symantec and other antivirus/security
    programs have caused this error.

    BCCode: 124 0 x 00000124

    Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
    verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
    data provided by the error Architecture WHEA (Windows Hardware).

    0 x 00000124<-- read="" this="">
    * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Reboot after installation of El Capitan

    I have a 27 "Imac, mid-2011. 3.1 Ghz.

    After you install the free update of El Capitan 2 weeks ago, my computer randomly stops and restarts itself, at least once a day.

    It just happened 4 times in a row and is very frustrating.

    Can anyone offer advice on how to fix or to downgrade the OS to the previous operating system?

    Have you checked that the third-party applications that you have installed are compatible with El Capitan?

    Check to see if there are updates available if you do not.

    You can also download and install this, http://etrecheck.com/#about

    then post the results here

  • Cannot update Windows 7 after installation

    Can anyone help?

    I have a problem with my installation of windows 7. It freezes after every start. I was not able to do a windows update. It's good to start, but it does not update.

    I downloaded some updates. Question: where can I put the files so that they can install on startup?

    I suspect that the problem is nvidea Geforce 7600 GT. I have the latest version of the driver. How can I disable acceleration 3D (from start) /

    I found some memory conflict messages in the display driver. Could be the problem?

    Any help is appreciated.

    Russ

    Hello
     
    To answer your questions:
     
    1. where can I put the files so that they can install on startup?
    You should not put all the files in the startup as this problem may occur if there is a problem with updates to install.
     
    2. How can I disable acceleration 3D (from start)?
    Tell us why you need to disable 3D acceleration?
    3. What is the problem you are having with the display drivers?
    4. What is the exact error message?
     
    In the meantime you can follow these methods below and check if the method solves the problem.
    Method 1:
     
    Check the history windows update to find the error code for updates failed. Make a right-click on the update failed, and then click view
    To do this:
    a. click on start ORB
    b. type of line Windows Update search
    c. click on Windows Update
    d. Select view update history
     
    Method 2:
     
    You can run run the Windows Update Troubleshooter and check if the problem.
     
    Open the Windows Update troubleshooting tool
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 8 keeps rebooting after installation

    I need help.

    So, after the death of my hard drive, I picked up a new and installed windows 8 via a USB port.

    After having met a loop without end of installation, I arrived at the first marketing of the time. However, when I got the sign in the section, the pc crashed and restarted. Then it happened again and again and again.

    At one point, he gave me a Windows has not been loaded properly and gave me a lot of options. I tried auto repair, didn't work. And now it will not even to that screen more, have a "disk read error" every time the AutoFix runs and restarts.

    Any help that can be provided will be appreciated.

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that you can't start your computer, Windows 8 and it keeps restarting. I will certainly help you get this fixed number.

    I suggest you follow the advice given by Mann_Manohar answered December 29, 2014 in the below mentioned thread and check if this is useful:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/a-disk-read-error-ocurred-message-on-boot-Windows/f1c2336d-3adf-4D37-AB35-beb4f10ea16d

    Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

  • Windows vista activation problem product ID and Java (0xc0000005) fatal error after installation of windows vista format.

    Original title: try to put wrong question ID problem!

    Due to problems of Java, I formatted and made a new installation.  My Vista Home Premium says its active.  When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect.   When I try to ask online chat, I cut that they deal with activation problems.  It is activated, I can't get the Web site recognize my product id, so I can post for help?  The world is - that sound familiar at all?

    I have fatal routine Java errors when I play a game Runescape.  I'd appreciate any help anyone could give me. Thank you

    A fatal error has been detected by Java runtime environment:
    #
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
    #
    # Version JRE: 6.0_30 - b12
    # Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
    # Problematic frame:
    # V [jvm.dll + 0x94dca]
    #
    # If you want to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    #

    Hi Verisetti,

    Have you installed security software after formatting windows?

    If so, you can uninstall the security software temporarily and check if you receive the access violation error.

    If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.

    Note: Make sure that you install the security software after the trial.

    What about Windows vista product ID, you can try to validate Windows and check if it helps.

    For more information, see the following articles:

    What is the validation, and how does it work?

    Genuine Windows: Frequently asked questions

  • Adobe Flash required plugin after installation

    There are over 100,000 firefox users who cannot watch a video and you stop and use internet explore. You had thousands of questions and you answered all of us. We are all installed the 32-bit flash as you instructed; It does not work! If you cannot solve your problem we all to empty your browser in the trash.

    First, it might not even be legal for Mozilla to fix with Flash, it's a proprietary source and closed application that limits the availability of sound ' source code.

    Second, Mozilla resources are limited. Whenever they move to come with a patch for Flash would be taken away from working directly on the code of Firefox.

    Thirdly, incident reports are probably what will by Mozilla to determine the severity of a problem. Guess anecdotal wild-timates how many users is victims (raw numbers of users or the by percentage of facilities who are affected) will not impress Mozilla.

Maybe you are looking for

  • Lock the screen and the wall turns more dark and original background paper

    Can someone tell me please how to change? I want my nuggets of chicken to look pretty and not dark and dull! Thank you Mish

  • Asked to install jave continually

    Click on a web site that requires java... get the popup - activate the plugin... I agreeThen it says obsolete Plugin and takes me to the Oracle site and downloads InstallerRun and install...Start browser... go to the websiteTells me plugin is necessa

  • Failed to configure the addon in v29 button

    Try V29 and now have a question:When I try to place the bar of tools or menu button, the system always displays stop sign, so I can't place the button, why?Please notify.

  • XAV5421 problem

    Hello I bought several and they XAV5421 it works very well for a while. After a time of a Powerline began to no longer work on an IP in particular my LAN. Even after reset nothing works. I therefore decided to buy more to see if the first was not def

  • CUCMBE 6000 connection install the unit on the stand-alone server

    I have a new C200 M2. My question is, can I I separated the connection of the unit installed on a separate server, rather than having CUCMBE\Unity connection on 1? The C200 running vmware 4.1 Thanks in advance