kb2416471 install fails with 80070BC9 on Windows 7 Starter Edition.

Similar Questions

• Vista SP2 x 64 install failed with error 80004005

  I tried to install the SP2 for Vista X 64 (KB948465) four times.  The most recent installation attempt failed after
  (1) created a new administrator account and did the following...
  (2) uninstalled CA Antivirus Suite (no other antivirus installed).
  (3) stop the Windows Update service, renamed %windir%\SoftwareDistribution for... \SoftwareDistributionOld, restarted update service, restarted.
  (4) installed and run CheckSur (can provide the journal).
  (5) restarted in clean boot mode.
  6) attempted to reinstall SP2.

  In all attempts, installation seems to be completed, during the restart of the installation of all 3 full updates to 100%.  However, the message then States that the installation failed and the original configuration was recovering.

  I have a new a6700f desktop HP Pavillion, AMD Phenom X 4 9150e Quad Core clocked at 1.8 GHz, 4 GB RAM, 500 GB HARD drive; Windows Vista Edition Home Premium x 64 SP1, nVidia Quadro FX 370 video card.

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
  http://support.Microsoft.com/kb/971204 TaurArian [MVP] 2005-2010 - Update Services

• Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

  Hello

  I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

  Thank you

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• ReadyBoost works with Windows 7 Starter Edition?

  ReadyBoost will work with Windows 7 Starter Edition?
  I am intrigued by the Archos 9 tablet PC runs Windows 7 Starter Edition, but received some lukewarm reviews, with its performance most often described as weak.
  I thought that Readyboost can help him, but I'm not sure if it is supported in Windows 7 Starter Edition.
  Does anyone know for sure?

  Hi Ebenton,

  Windows ReadyBoost can use storage space on some devices of removable media, such as USB flash drives, speed up your computer. When you insert a device with this capability, the AutoPlay dialog box will offer you the option to speed up your system using Windows ReadyBoost. If you select this option, you can then choose how much memory to use for this purpose.

  This feature comes with all editions of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  If you purchased Word on CD, it's no big deal; just reinstall it after the factory restore. If it was bought online, copy the file downloaded to a CD and then reinstall it later.

  Is there a particular reason, why you want to do a restore complete? Have you problems? If so, you can try asking here on how to fix them and do not have to do a restore, reinstall all your programs and all of the updates and service pack 1.

  SC Tom

• How to download and install windows 7 starter edition?

  Hi, I want to wipe my hard drive and install 7 starter and need to find the download page for exactly Windows 7 Starter and not others, as I only have a product key.

  Where is the site that has the Windows 7 Starter-download page? And the instructions to place it on the disc?

  Windows 7 Starter Edition comes pre-installed on the new Netbooks or Nettops, it can be purchased separately.

• How to uninstall windows live messenger with windows 7 starter edition

  How uninstall windows live messenger has my computer windows 7 starter edition

  How to uninstall Windows Live Messenger in Windows 7:
  http://www.intowindows.com/how-to-uninstall-Windows-Live-Messenger-in-Windows-7/

• Is it possible to use a second monitor with Windows 7 starter edition.

  Original title: I want to thank my screen on a second monitor, but my pack to boot windows 7 does not give me this option. Should I upgrade to Windows 7 only for this, or are there free tools/downloads available?

  It does not recognize the monitor, but it's simply not show the option "extend the screens/monitors" in the menu dropdown.

  Hello

  Unfortunately, you have not the possibility to extend your desktop to an external monitor or projector in Windows 7 Starter edition. It would be best to upgrade to Windows 7 family premium, professional, Ultimate or enterprise.

  For more information, see the following links:

  Move windows between multiple monitors

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade

  Hope the information is useful.

• Windows 7 Starter Edition and LabWindows/CVI

  Hello

  I have two questions/problems with an application written with CVI 9.0.1 and CVI 2009 respectively Windows Vista professional.

  First if I have a distribution of my software package (or a version of a sample distribution package) and you want to install it on a netbook with Windows 7 Starter Edition Setup displays the following error message:

  "This product does not support Windows Starter Edition."

  Is this just a restriction of the installation program, or CVI will never support the Starter Edition?

  We often sell these netbooks as well as our units of measurement as an input/output device. But I think that in a future close all netbooks will use Windows 7 instead of XP and above all the Starter Edition.

  So if it is not taken in charge this will help upgrade netbooks to Windows 7 Home Premium? I have already tested Windows 7 Professional and it works, but I do not want to install Professional on a netbook...

  My second question also the Starter Edition.

  I'm building a kit of distribution of working space example "interp.cws" (curve fit and Interpolation) with the runtime engine installed in the application directory. If I run the .msi instead of the setup.exe package then the software has been installed on the system.

  So I can run the software, and it seems to work. But if the software calls a function in the library of analysis advanced (for example, the Spline Interpolation) it does not work. With remote debugging I discovered that there was a nonlethal runtime error "the analysis DLL library is not found or could not be loaded" during the spline function calls.

  The same sample works fine with Windows 7 Professional.

  Is this also a restriction of the CVI, and will be the reason (or one of the reasons) did not support the Starter Edition?

  Or is there a workaround for these errors?

  Best regards

  M.S.

  National Instruments supports Windows 7 Starter; However, just as now, our facilities are defined to stop any Windows Starter Edition is detected.  This is because XP and Vista Starter Editions were marketed to emerging markets and had severe limitations of performance.

  You should make sure that your specific product supports Windows 7.  If this is the case you can follow the instructions in the knowledge base

• HP Mini 110 windows 7 starter edition will not be upgraded to windows anytime

  Help! Can't get my HP Mini110 of windows 7 starter edition Home Premium. Got the key, but it is said that this key is not compatible with current windows and cannot be downloaded. What does that mean? How can I download and install this upgrade? I paid for it.

  Probably means that you have a copy of Windows 7 32 bit installed on your computer and you are trying to download and install a 64 bit version of Windows 7.

  You can't do an anytime upgrade from 32-bit to 64-bit. New ball game. Requires installation not an anytime upgrade.

• Windows 7 Starter Edition does not recognize a hard drive WD

  Windows 7 Starter Edition does not recognize a hard drive WD, I used until last month. Device Manager sees it, he sees the USB controller (it lists as a mass storage device), but I can't access the information on the hard disk, or make use of the last backup. I tried to uninstall USB drives - it is not the thing. It gets listed under disk drives.

  Thanks for the reply.

  There was no error message: the device has been recognized (listed) by the USB controller and the Device Manager, but not by the management of the disks - so I couldn't access.

  I managed to fix the problem after:

  -J' scanned the computer (DELL Inspiron) with the Safety Scanner
  -J' completely uninstalled all the software associated with an external hard drive
  -J' uninstalled the USB controllers
  -reboot the system
  -reconnected the external HD
  -After gaining access to the drive, I installed the dedicated software

  Best regards

• upgrade from windows 7 starter edition to professional b and I want to go back to the starter, how can get on this subject and also the number of activation and the production of my Starter how do I get it?

  I updated level of windows 7 starter edition to professional but I want to go back to the starter. How do I go about it. I also want to know how can I get my product number and the activation number.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Samsung: Press the F4 key to the Samsung logo when you turn first.

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

• on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  Hi kuentin,.

  Welcome to the Microsoft Answers site!

  (1) - what do you mean you have only 1 user account?

  When you set up Windows, you will need to create a user account. This account is an administrator account to allow you to set up your computer and install any programs that you want to use. And that's why the user account you are using is the administrator account.

  There is no way that you can create an administrator account, or by using a Standard account.

  (2) are you having issues during installation of the software or opening it?

  (3) what exactly happens when you try to open the software application?

  (4) should be codes error or error messages, if any?

  (5) what software are you trying to install or open?

  I suggest you go to the link below and read for more information on user accounts.

  http://Windows.Microsoft.com/en-us/Windows7/user-accounts-frequently-asked-questions

  Get back to us with more information and try out us and help you better with the same.

  Concerning
  Varun j: Microsoft Support
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer Windows 7 starter edition has vertical screens

  Original title: Windows 7 starter edition has half of the white screen with vertical lines

  runing Netbook windows7 Starter half of the screen is white with vertical lines?

  Hi Williamwaltertg,

  1 did you do changes on the computer before the show?

  2. What is brand and model computer?

  Method 1: Update the video drivers

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

   

  Method 2: Uninstall and reinstall the video card

  a. click Start, type devmgmt.msc in the start search box and press enter

  b. right click on the device, then click on uninstall. Restart the computer and allow the driver to install.

• Language Pack for Windows 7 starter edition

  you are now available to download the language pack for Windows 7 starter edition?
  Windows Update does not contain the option to change the language or to download the language pack. I have a windows in English and Spanish, I would spend

  Only Windows 7 Ultimate comes with language packs - see http://windows.microsoft.com/en-US/windows7/products/compare

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.