KB2418241 Installation causes TFS Build to fail
We recently had a series of automatic updates installed on our TFS server over the weekend. After these updates have been installed - our generation automated nightly began failing, he could get later - would not have build - nothing...
Backup off the patches that have been installed one at a time until he started working again - and then reinstalled the ones we removed until we could get his failure once more, we started. We were able to narrow the problem down to a fix.
The problem that happens when install us KB2418241 (updated for .NET Framework SP 2.0 and 3.5)
http://support.Microsoft.com/kb/2418241
Our generation is nothing fancy - just get latest - perform a build, and that's all.
The event log provides no details as to why this is happening, just a single message with the command start MSBuild - when you try to run this in the command prompt - you get a WindowsShellEx "Access denied" error. Our services are connecting with the right credentials and the domain account using the service has full access to the folder to get later.
For the time being - we will not re - install the patch until we find out why it does not work - but it would be good to know why it fails at first. All I have this problem and have ideas on how to resolve the issue in addition to not use the patch?
Thank you
Chase
See the section "How to get help" of http://support.microsoft.com/kb/2418241
For individuals (only), visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/
For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
Step that caused the UUT to Fail
Hello
Can someone tell me if TestStand stores step which caused the UUT to fail anywhere which is easily accessible in the loop of PostUUT?
Thank you best regards &,.
Shane.
Hi Shane,
It is under Parameters.Step.Name in the SequenceFailPostStepFailure callback.
-
Ripple Build: [ERROR] Failed to run launching java.exe.
Hello BB community
I have a problem with the Chrome Ripple 0.9.8 extension I could not find such an error in google.
When I click on the build, it shows error:
Oh, Snap! Build request failed with the message: [ERROR] failed to run java.exe launch.
and create the file .zip in the output folder
I have Java 6, 7 and 7 installed SDK
The problem was that I moved manually SDK Webworks directory to another location.
the solution is to change the path to the bbwp.properties file in:
C:\...\BlackBerry SDK software WebWorks for Tablet 2.2.0.5\bbwp\bin -
Build request failed with the message: error: ENOENT, untie
I use emulator ripple to package the application for Blackberry os 7...
But when I press the button package it gives me error as follows:Oh, Snap! Build request failed with the message: error: ENOENT, remove the link "C:\Documents and Settings\AtikJ\RippleSites\AgriQuote\packaged\AgriQuoteApp.zip".
Duplicate of:
http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-while-packaging-the-app-us... -
[Build ripple failed] The resource name is not valid
Hello guys,.
I have problems with my application using ripple of packaging. It continues to produce [Oh Snap! [Build request failed with the message: invalid application [ERROR] (Archives) - name of the resource are not valid (img/[email protected])] error.
I'm guessing a reoccurrence of an old bug as tneil well said in this post , so I used the latest version of the SDK (BlackBerry WebWorks SDK 2.2.0.15), but the error persists.
Please note that I used Ripple many times before with the "-" on the names of file deleted on my mind, which is probably the reason why I've not encountered this earlier but it's just that I'm importing pre-made images with strict naming conventions (with a "-") so I can't go and rename them.
Here is a screenshot of ripple.
Any help would be appreciated.
There are special characters that are not supported in the names of embedded resources for an application running on the BlackBerry Smartphone platform.
I think that is one of these characters not supported
-
Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."
I need your help pls.
Hello!
Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.
-
Error of the ripple: Oh Snap! Build request failed with the message: CreateProcessW
Hello
I installed the Mobile Emulator 0.9.1 ripple with SDK for Tablet 2.2.0.5 WebWorks, following the instructions exacly on a Windows 7 64-bit machine.
If I try to package virtually any application (HelloWorld, weather, examples, something more complex, whatever), I get the following error:
Oh Snap! Build request failed with message: CreateProcessW: The system cannot find the file specified.
I tried a lot of things. I'm guessing that it's a mistake with the SDK, since I can enter any path to any folder that exists on my HD as the path to the SDK and I get the same error.
Path SDK: SDK for Tablet 2.2.0.5 WebWorks c:\RIM\BlackBerry
The project root: c:\Users\Username\RippleSites\AppName
Archive name: AppName
Output folder: c:\
I tried different paths for the foregoing, moving my code and by reinstalling the SDK.
I'm at my wits end - about to renounce WebWorks. Any ideas?
It seems %SystemRoot%/system32 and any % were missing from my path variable. All good - too bad!
Land
-
Build request failed with the message: helloWorld/Dokumente / is not a valid path
Hello
Unfortunately ripple does not work under Windows 7, so I tried on Mac. On Mac, I have the following parameters in the ripple:
SDK path: / Developer/SDKs/Research in Motion/BlackBerry WebWorks SDK 2.3.1.5
The project root: / Dokumente/helloWorld
Archive name: helloWorld
Output folder: / Dokumente/BlackBerryOutputThere is the file config.xml and index.html file in the helloWorld file
I have for this site:
When I try to pack in ripple, I get:
Build request failed with the message: helloWorld/Dokumente / is not a valid pathThere is a message ' no simulators found "on the bottom of the settings, too." '
I tried different paths, one of my localhost in Apache, but nothing works. What's wrong??
Well, the path was not "consistent". I hate the f... Mac: / Users/Valentina/Documents/helloWorld to the project root and/Users/Valentina/Documents/BlackBerryOutput was necessary.
Just in case somebody stumbles on the same problem.
-
I am trying to package and sign an application with ripple and I get this error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file
What can possibly be the problem here?
Solved!
I had the field output folder of the same value as the name of the archive
-
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
-
How to install TFS Build controller
Hello world
I'm a Consultant for a small business network. Today I am responsible for the deployment task "TFS Bulild Controller' on a Machine virtual Win2k8.
Microsoft product support has been kind enough to inform me that TFS Build controller is part of the 'Visual Studio Team Foundation Server 2010' software, so now at least
I know what to download. Someone from the instructions or a guide to procedure on how to install this?
Any help would be appreciated.
Hello
Check with the Experts of MSDN.
Understanding a Team Foundation Build system
http://msdn.Microsoft.com/en-us/library/dd793166.aspxCreate and work on a Build controller
http://msdn.Microsoft.com/en-us/library/ee330987.aspxMSDN - Visual Studio Developer Center
http://msdn.Microsoft.com/en-us/vstudio/defaultVisual Studio MSDN forums
http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudioMSDN Visual Studio, and related Forums
http://social.msdn.Microsoft.com/forums/en-us/category/vsvnext, visualstudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end, visualfsharpI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
get document cloud installation a message "webget request failed.
get document cloud installation a message "webget request failed.
Hello Kent,
Please see: get an error to install Acrobat DC - WebGet request failed
I hope this helps.
Concerning
Megha Rawat
-
After installing Flash builder 4 neither to him nor to flex builder 3 has been able to launch flex swf:s. After hitting to run or debug flex gives a prompt saying "Flash Player is not found. Flex builder cannot locate the required version of Flash Player. You need to maybe install Flash Player 9 or reinstall Flex Builder. Do you want to try to run your application with the current version? ». The popup itself happened before the installation of flash builder 4. But normally I would hit just Yes and he would use any flashplayer is default.
Now, if I click Yes it launch command prompt with a path to the installation folder of flex 3 Builder. When running flash builder 4, same happens except the path is the folder of installation of flash builder 4. Flex then begins waiting for connection of the debugger, and after awhile, he invites a timeout message. The title of command prompts is... \workspace\project\bin-debug\filename.swf.
When you open the SWFs directly from windows, they open fine.
I used the uninstaller for flash player software and recovered both fp9 & 10 and reinstalled the. That did not help. When we browser everything works fine, the problem occurs only when you launch standalone player. I tried to check the registry settings if there is something wrong, but all the flashplayers paths seem to be ok.
Is there another hope to solve this problem than to reinstall flex builder 3 and flash builder 4 from scratch?
You need content installed FP debugger
http://www.Adobe.com/support/flashplayer/downloads.html download from here and install it and you should see the problem go away
Download the Flash Player 10 ActiveX Windows control content debugger (for IE) (EXE, 2.03 MB)
-
I have trouble setting my local setup correctly with a mixture of regions with different configuration of persistence of disc. Is a configuration problem on my end or a bug in GemFire and/or Spring GemFire data?
The configuration of my work is as follows:
< gfe: replicated-region id = "replicatedRegion" cache-ref = "gemfireCache" disk-store-ref = "overflowOnlyDiskstore" persistent = "false" >
< gfe:eviction type = threshold "HEAP_PERCENTAGE" = "90" action = "OVERFLOW_TO_DISK" / >
< / gfe: replicated-region >
< gfe:local - region id = "localRegion" cache-ref = "gemfireCache" / >
With the above configuration, I can successfully call JSONFormatter.fromJSON (json) and get a reference to a PdxInstance object. However, when I kinda modify configuration to enable the persistence of drive on one of the regions, the call to JSONFormatter.fromJSON (json) fails. The change is as follows:
< gfe:local - region id = "localRegion" cache-ref = "gemfireCache" persistent = "true" disk-store-ref = "persistOverflowDiskstore"/ >
Without any additional modification, the following error starts occurring:
com.gemstone.gemfire.pdx.JSONFormatterException: could not parse JSON document: [Source: java.io.StringReader@5549f0e, line: column 26,: 6]
at com.gemstone.gemfire.pdx.JSONFormatter.fromJSON(JSONFormatter.java:66)
...
Caused by: com.gemstone.gemfire.pdx.PdxInitializationException: The PDX metadata must be persistent in a limb that has persisted data. See CacheFactory.setPdxPersistent.
at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.checkAllowed(PeerTypeRegistration.java:531)
at com.gemstone.gemfire.pdx.internal.PeerTypeRegistration.verifyConfiguration(PeerTypeRegistration.java:515)
...
Note that it is breaking while I try to get a reference to a PdxInstance, and if the code has not yet arrived at the point where I place a PdxInstance object in a region.
Thanks for any help in advance.
Hello
JSONFormatter PDX uses as is the serialization mechanism from the Gemfire cache. As indicators of error, you must have your persistent PDX meta-data when you use PDX with an area that itself is persistent. Adjust your configuration as follows:
It will use a default for PDX record store, but you can also use a specific store if you wish.
When you use PDX, a "PDXType" is created for each class serialized with PDX and this type id is stored with the data in the region. If this region is persistent, then the PDXType, associated with this object must also be kept.
-Jens
-
Running studiocli via ssh using authorized_keys o causes Epic build Fail
Preface: I use authorized_host ssh keys to implement my non ssh sessions.
Do this command in the shell of my build machine:
SSH o 'StrictHostKeyChecking no 'root@myip' studiocli - createbuild - profile opt/vmware/var/lib/build/profiles/Build.xml--debug--verbose'
Results output and following (epic fail of my attempt of construction):
Failed: Failed to reset the process group identifier
I followed it down to the code following in studiocli python (I commented).
change vabs in a group of various different process than the OBA
avoid the process OBA is killed during the cancellation of construction *.
try: *.
OS.setpgid (0, 0) *.
except OSError: *.
Failure ("Unable to Reset process Group ID") *.
return ret *.
What impact will this have on my versions if I comment on him?
Is there a better way to call studiocli in ssh?
Thank you
H. Alan Treesong
Try:
SSH root@myip ' / bin/bash/etc/Environment; / opt/vmware/bin/studiocli - createbuild - profile opt/vmware/var/lib/build/profiles/test_profile.xml--debug--verbose'
Vishwas
Maybe you are looking for
-
I forgot my master password. I used the address provided to reset. He takes me to the page that tells me that all passwords will be forgotten and gives the possibility to RESET or CANCEL. I try choosing RESET and nothing happens. What am I doing here
-
I have HP Pavilion p7 desktop PC - 1446 s running 64-bit Windows 8 I keep gettting an error about 98% that says "windows update Setup error" or something very close to that. I'll post a picture, too. I have tried everything I can think of, even a new
-
Cannot install the printer drivers for the KODAK ESP5250.
I have everything that I can think, the printer worked fine with a Netgear router, but will not be installed with the Linksys E1000 router. Please contact me at * address email is removed from the privacy *.
-
Get the error message about the file cCNColms.dll missing at startup.
I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damag
-
Internet connection drops (loss of connection)
My internet connection keeps dropping on my laptop computer (Toshiba Satellite L355-S7915), after about 30-45 minutes of use and I fix by restarting the computer. I can't reconnect without having to reboot. When I disconnect and try to reconnect my