KB2446708 is updated daily
My windows update service keeps telling me to update the same update daily - KB 2446708 "Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708). He has done that since mid-April. I probably have 10 or 12 in my history of update. Anyone know why this is happening? Thank you.
Download size: 11.2 MB
You may have to restart your computer for this update is taken into account.
Update type: Important
A security issue has been identified that could allow a malicious user to compromise your Windows system running the Microsoft .NET Framework and gain control full top. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
I, too, had the same problem as MarsTH. Every day since April 13, the KB2446708 update tried to install it but failed. I'm running Vista, and I reboot my computer every day so it's not the problem. Of course, I would like to find a solution to this.
Six weeks ago, I started to receive daily messages from Windows Vista update saying there was an update whenever I'm going to stop. This continues whenever knew I down.
You can use Windows Explorer (start orb > all programs > Accessories) and access
Then delete all the contents of the subfolder of download. Who will be redownload the update 'invisible '.
Then open Windows Update in Control Panel by clicking the ORB start > in the Start Search field type in wuapp.
Under, click on wuapp to open Windows Update programs.
Click Change settings in the left frame.
Under important updates, set the drop down to "Download updates but let me choose whether to install them".
When the update is downloaded, click the Windows Update icon in the Notification area (at the bottom right of the screen).
That will appear installs you updated several times.
Please write the number of the update but do not install it again.
Post back to this topic with the number of the update.
OR, you can go here and click the Fixit - How to reset the Windows Update components
When you are prompted to save or run the MicrosoftFixit50202.msi, click Save.
Once the download completes close all open programs and browsers.
Now run MicrosoftFixit50202.msi.
Select aggressive mode and which will remove all downloaded updates.
Then change the way that Windows Update will update the system to help to change the settings, as described above.
Expert MowGreen Windows IT Pro - consumer safety
Hi all: I have windows 7 installed on a HP Professional laptop. Initially, it had Vista, but I updated through HP last spring.
Whenever I stop, trying to install updates, which is daily. Currently, it tries to install 13 of them and my setup log shows literally hundreds of times as there downloadedl of each of them. The next time I turn on the computer told me to wait while it configures the computer attempts to install the updates. Then he goes down and comes back to some previous settings and again by the same nonsense. In addition, it is crash-prone gives me a blue screen and an error message which goes off quickly, while it restarts. I scanned the mechanic help system with nothing fancy. Any suggestions? I actually think to reinstall Vista, so you can see that I'm annoyed. Thank you
In addition, it is crash-prone gives me a blue screen and an error message which goes off quickly, while it restarts.
If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, buttakes a lot of mouse clicks to get there:
Start | Control Panel | System | Advanced system settings (needAdministrator information here |) Advanced | Startup and recovery /settings.
On this screen, clear the check box under system failure that says: Restart automatically. The next time the BSOD appears, your computer doesn'tanother thing until what you press the hardware Reset button, so you'll have everythingtime you will need to read and copy the error codes. Paste it here,verbatim, and someone should be able to point in the right direction.
Almost every day (?) I get a cursor by announcing that there is a new version or an update. I click on it to read it, and the window opens for the update version 39.0. If I were to check the Firefox 'About', the text reads "39.0, Firefox is updated, you are currently on the beta update channel"...?
So, are these updates do not follow a numbering sequence? I know how these updates are not intrusions, etc. ?
- 2. is there a way to get out of the beta version, just in case? That I should?
Thank you! -most popular!
The current beta is the next version of Firefox 39.0 (39.0 RC) which will be published next week (Tuesday) if all right, so you will not get new updates on the Beta update channel until the switch to Firefox 40 later next week (probably Friday).
There has been 5 generations so far and who can explain the many updates, you received.
Every day I get a notification to install SP2 for vista, I accept it, I get a note that the installation was successful, but the notification is displayed again the next day. (SP1 is already installed)
1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
2. in the left pane, click view update history.
3. find the update for Windows that has failed to install, and then double-click the update to view more information.
Updates that have failed to install will display failed under status, next to the name of update.
4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
5. click on the links in the dialog box Windows Update under more information or help and Support to try to solve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.
OK, so I've had this problem for about 6 months now. Whenever I restart my computer, the same CC updates are appearing, in spite of perform the updates at each new session. I renamed the file AAM Updater as explained here by RomsinhaAnd it works for awhile, then I have to start AGAIN and AGAIN because the issue continues to be. Is Adobe aware of this problem and they are actively trying to fix? Or are they happy with sub par performance CC and this bug annoying?
I know I'm not the only one. Many other people on this forum and elsewhere on the web have this same problem. Time to fix Adobe and stop embarrassing your loyal customers.
the following link tells After Effects, but check YOUR permissions.
I wonder update Photoshop and Bridge every day. It has happened to more than a week. At first I just thought - this is ridiculous, why should Adobe to update these things every day, now I realize that updates FAIL. They are the same.
What happens is, I see the updates icon, so I click on "update all". "CC then apparently full updates and everything is fine, until I have reopen CC, then said ' 2 updates" once again - the same updates. I can just do it again and again and nothing will change - apps don't are never really updated.
Please see the thread: http://forums.adobe.com/message/6005305#6005305 and let us know if it worked.
I'm running a Dell laptop and XP with a DSL connection that says it runs at a speed of 100.0 Mbps. every day when I start my laptop, it takes forever to do anything until the daily update is complete. Sometimes I need to check something real quick and I have to wait forever. It would be nice to be able to suspend the update until I finished to do what I need and then resume where it is not important get info fast. updates only take 3-5 minutes, but it's annoying when your in a hurry and you can't get what you want without taking a coffee break...
No problem, girlfriend. Updated & MSE is a little tricky.
Set to automatic update/Microsoft Update will offer definitions updates and program updates (i.e., improvements in engine version & application) to MSE. If a user rejects them, MSE will always auto-updated daily (updates definitions day & upgrades to the engine). If a new version of MSE becomes available, MSE will prompt the user to install it.
Definitions/Signatures MSE FAQ update
Why the definition for MSE updates considered OPTIONAL updates?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
I'm sure this has been asked before. I just installed Microsoft Security Essentials after the uninstall of a problem FREE AVAST ANTI VIRUS. PC is better/work order. But these daily updates of Microsoft are troubling. I have 103 Gig capacity hard drive with space of 'FREE' 69 Gig. And abandonment. I don't do very MUCH with the PC. Basic stuff. Account management. Look at Yahoo and Accuweather. Create a card. Messaging. My question is Microsoft updates daily use eventually the capacity of my hard disk? There are now 55 updates. When I ran Windows updates with the Defender, there were 4 or 5 important updates per week and I could choose the ones that I have no need of (I think). Your support of experts and orientation is a great help for me and I thank you in advance.
It would take a lot of time to fill your disk space hard if you don't use it a lot to save anything yourself
MSE updates will not be a concern for you with to take too much space
You MUST have these updates as Malware is written daily and definitions to help protect your computer should be the writtern and installed to protect your machine
a way to choose which updates you want to install, change how you get updated Automatic FRO other updates to 3rd party hardware drivers, etc.
read this tutorial
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
and to clean the C: if needed, read this information
see if this program helps you to determine what is take up space
by default system restore will have up to 15% of the capacity of the hard disk
you would like to reduce this amount
also use disk cleanup
The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:
Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.
System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.
also scan for malware
Download update and scan with the free version of malwarebytes anti-malware
and read these information from microsoft on windows optimization
Original title: KB2446708 security update
I keep getting reminders on the above update even if I have already completed the update.
1. have you checked if it is installed successfully?
You can read the Microsoft article below and try the steps to solve the problem successfully installed update offered again in Windows updates.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
You can also download the stand-alone update package and try to install it:
Also check out the link:
MS11-028: Description of the update of security for .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: April 12, 2011
Hope this information is useful.
original title: update KB2446708
Update has downloaded more than eight times and is always eager to download again. What is the problem?
Thanks for your post. Please see the following article for a possible solution to this problem. Please let us know if this or don't help solve the problem.
See you soon
It isn't really a problem, but Firefox Developer Edition ask me to update to version 44.0a2, which I already
What version of Firefox do need it?
Do you need a stable version as the rejection, or even the beta version that will become the next version and get an update about twice a week?
Or you don't mind updating daily with one using a generation night to test new (unfinished) features that will be part of a future version?
The Nightly alpha1 channel sometimes gets a respin, and if you missed the first update then you will need to download the full version (45 MB).
Editing (alpha2) does not get a respin because that only code that has relied on the Nightly channel for some land of week on the update channel, as well as the channel is a bit more stable.
Our that it is always recommended to install the current version, or at least the beta if you decide to use one of the alpha versions, so you have a relief if certain Web sites or of any browser does not work.
with the update of daily Thursday (Australia) after update owned couldn't boot received message "could not find xpcom.
I then restored by day sauvegardΘ installed upgrading again every day would not restart with the same message
I tried again on Saturday you have the same problem
I'm now ignoring the update message that is very annoying because he wants me to update daily
The bug in question should be solved with a daily update of today. However, I agree with the recommendation to go with 31.0 once it comes out next Tuesday, or at least to use the beta versions (once per cycle) as a compromise between stability and get the latest features and updates to the platform.
Sad tales I've heard talk about manufacturers of laptop never updated to gfx card drivers apply to toshiba?
Any info on the question of whether an update for their SLi systems drivers display is on the horizon?
see you soon-
The fact is that display driver cannot be updated daily as for desktop computers. Priority by the manufacturers of cell phones is worrying about the operation of the equipment. Using new graphics card drivers will be forced to run faster and better that offers better graphics performance. The result is essentially an overheating and may end with a faulty graphics card.
In this case, the card mother together must be exchanged and it costs a lot of money. So, I think that no one can say with certainty when the next pilot will be available.
Since installing Windows 10, I get a failure of Win10 updated daily notice 2 updates the printer software associated with my Photosmart 7520. Here indicate messages W10, we see a solution to this?
Hewlett-Packard-Imaging, other series of HP Photosmart hardware 7520 - Fax Null - (Failed to Install)
Hewlett-Packard-Imaging, other series of HP Photosmart 7520 material - Print Null - (Failed to Install)
Found the answer on another post...
(1) in Device Manager, open "printers".
(2) remove "unknown device" if present
Restart Windows 10 update, problem solved! Just as simple as that.
Maybe you are looking for
I opened the often several pages such as two or three and you want one top on the other below but if I click on reducing to a minimum all hide.How can I view multiple pages? Please someone respond and oblige. Thank you
I have 3 printers Officejet 8600 and I have the same problem, regardless of printing from a Windows 8, Windows 7 or a laptop. Whenever I try to print in a font (say green) colored grand (say 48) (say arial) the odd lines have a different shade of gre
OK so here is what I try to accomplish with 3 switch Cisco SG500-52. I created 4 VLANS on a SG500 I call my central office switch and it is set in routing mode. My VLAN is thus 400 (Infrastructure ESXI hosts, firewall, etc.), 401 (VoIP), 402 (users)
I just installed an ASA with an AIP-SSM-20 version 5.1. I have several subinterfaces on Physics G0/0, which is be the control on the SPI interface. However, when I try to add this interface as interface monitors, I get "error: Interface GigabitEthern