KB2597112 and KB2598292 do not repeatedly move

I tried the Microsoft Fix - It, who found a problem with microsoft update and supposed to be fixed, but updates still wouldn't install.  They are:

Update of security for Microsoft Office 2003 (KB2597112)
Update for the filter of junk e-mail in Outlook 2003 (KB2598292)

I have SP3.

Thanks for the suggestion, but your last one did not work, either.

Probably, my question in my previous post was relevant.  I have now solved this problem, after trying the following:

1 has attempted to install updates, painful, with installation CD original in the optical drive, there is no agency.

1 try to repair the Control Panel - Add/Remove Programs Office installation, failed / crashed.

2 try to repair install original CD Office, failed / crashed.  This convinced me that I was on the right track.

3, uninstalled Office of the original CD, with success.  Stupidly I forgot to backup my Outlook .pst files.  Restarted, even if it not ask for to do.

4. re-installed Office from the original CD.  I had to type in the serial number again key code.  I have re-installed the location by default and chose to not delete the installation files.  Fortunately, my Outlook folders and preferences were always there as before.

5 Ran Microsoft Update three times.  He had several updates the first two times, only the third time.  Everything has been installed successfully.

My conclusion is therefore that at least part of the problem was the fact that I had removed the hard drive that held additional Office installation files.  I was not concerned to remove it, because in the past, I have removed the disk or files without any problem.  If I made a change to the program, a pop up window would be indicating that the files for installation is not found and prompting me for their location - all I had to do was pop in the installation CD and the change of program has continued.

Tags: Windows

Similar Questions

  • Not repeated movement execution

    Hello

    I use a cRIO-9074 to move a step of Newport. I want to make the movements repeated timed loop (synchronized with the analytical engine).

    My code looks like this:

    My code should do the following:

    1) press Execute on the façade and select the axis player with function of power block

    (2) function power block will send fact/True when enable axis/player is finished

    (3) true goes into the structure of the case and loop waiting time

    (4) after waiting - True is sent to straight-line move the block function

    (5) once the move is completed, straight-line move the function outputs fact/True block that is sent to the Feedback node

    (6) on the next scan engine loop True knot of feedback is sent in the structure of the case, should repeat the process

    Currently what is happening, is that the move runs only once. I think it's because the block move linear feature runs only on true front and my code remains true after the first run.

    I looked through the example of "Mixture several axes line Moves" and it uses the Feedback node.

    Anyone know how to get the move to repeat instead of run only once?

    Thanks for the help,

    Kyle

    Thanks for your comments.

    Here is how I solved the problem:

  • I have a computer dell latitude d510 laptop and installed the klite codec and still can not watch movies or listen to music on my windows media player, what can I do to fix this?

    I need a secure download to fix this

    Hello

    1 how long have you been faced with this problem?
    2 did you recent hardware or software changes to your computer before this problem?
    3. what exactly happens when you try to play any movie or listen to music in windows media player?
    4. are you able to hear the default sounds, like the startup sound?
    5. what type of media you are trying to read?
    6. are you able to play the same files from media on another computer?

    Please answer these questions. This will help us assist you better.

    Step 1: You can try the steps outlined in the article and check if it helps.
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/install-or-remove-a-sound-card

    Step 2: Look for a red or yellow bangs in device for the sound card Manager and send back the same.
    Reference: http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Sub-group under the main do not repeat group

    Hi all

    I have the G2 where I DOCNUM_DESCRIPTION, and I've linked G3 where I can have one or more subgroup called REASON.

    Something like that

    G2 - DOCNUM_DESCRIPTION
    -A
    B
    -C
    G3 - REASON N ° 1
    X
    Y
    G3 - DESIGN 2
    X
    Y

    Native BI, I'm able to use the repeat of group function and detail but in rtf I repeating group, and it does not repeat itself. for each docnum_description, I only get the first reason coming out not all. How can I go about it?

    It is difficult for me to say logical without seeing the xml and rtf model.
    Can you please write me model and xml. I'm going to sed if I can help you or not.
    E-mail: [email protected]

  • I rented a movie and I can not watch and has already been charged

    I rented a movie and I can not watch and has already been charged

    Expect to be charged when you choose to rent, not some time later. Why can not watch you? Error messages? What version of Apple TV do you have? See if anything in this collection of Apple TV support documents and user guides help.

    TT2

  • I added my yahoo email account in Thunderbird and it did not bring a custom folder that I created in Yahoo. How can I move or import these files

    I added my yahoo email account in Thunderbird and it did not bring a custom folder that I created in Yahoo. It was just the default folders: reception, sent and trash box. How can I move or import records custom website E-mail Yahoo in Thunderbird? It's just a free email account Yahoo and it shows as a POP in Thunderbird account.

    You must configure an IMAP account to show custom in TB cases.

    http://KB.mozillazine.org/Yahoo

  • I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

    I just recently upgraded to OS El Capitan.  Now, none of my movies to quicktime does not work.  I have the old version of Quick time 7 and it does not work either.  They do not convert.  Help?

    VLC will play them?

    http://www.videolan.org/

  • When I click and drag a window to move its location on the screen does not move properly.

    When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

    original title: "leakage" of windows

    It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

  • OfficeJet L7680 repeat me it is out of paper and now will not work.

    OfficeJet L7680 repeat me it is out of paper and now will not work.

    Is the message of the printer or on the computer. If on the computer you have communication problem check the connection between the computer and the printer.

  • I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player. How to convert files in a file type supported?

    Original title: M2TS

    I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player.  How to convert files in a file type supported?

    Hello

    The files have already been burned on a DVD and therefore cannot be converted. However, you can download and install third-party codecs to play .m2ts files.

    Codecs: Frequently asked questions

    WARNING OF THIRD PARTY
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

    Original title: high speed HDMI does not.

    I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

    Hi lisa,

    Try these steps and check the result.
    Step 1: Manage audio devices
    a. Click Start and then click Control Panel.
    b. click hardware and sound.
    c. under sound, click on manage audio devices.
    d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
    e. Select the device and click on set as default and then click OK.

    See http://support.Microsoft.com/kb/953500

    Step 2: Graphics output to monitor
    a. right click on the desktop, click chart options.
    b. output to monitor.

    Step 3: Adjust graphics hardware acceleration
    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
    b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
    Note: Some video card drivers do not allow allows you to change the settings.
    c. move the hardware acceleration slider at different levels and check the result.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • MS Movie Maker exports the Codec error on me and now does not work!

    My Vista's Home Premium Service Pack 1
     
    I was downloading MP4 fortunately making movies with MS Movie Maker then pvooop! MSMM no longer works.
    I just downloaded the WMM 2.6 and that crashes now in the same way.  WHY?
     
    When I try an import with the ASUS media and go to the folder that contains these files .mswmm files are not yet recognised by the Vista Movie Maker as being multimedia files, to see I choose all files. When I try to open them up to this moment there, I get the following error message:
     
    The file C:\Users\Don and Kim\Videos\Africa video Project\Drafts\Welcome Home\Clip 01_1\WH than Clip1.MSWMM cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.
     
    I tried to find the codecs but was put off by the fact that they were not genuine Microsoft and do not want to download something that will just make things worse.  Why should I have to download the risky codecs when I'm a real MS client?

    This happens to many people. Is there a bug in time in this SW?

    Nick

    Hello

    You try to read the MSWMM file?

    A .mswmm file is not a movie... it's a project file. If you double click the .mswmm file it can open Movie Maker, but unless you have imported all the sources files it will not be usable.

    I recommend you go through the link below which includes a complete description on how to put a DVD into Windows movie maker project.

    How to put DVD into Windows Movie Maker project?
    http://social.msdn.Microsoft.com/forums/en/webgadgetdevelopment/thread/5842c3d0-8ba3-4399-8aa9-e5330eb1a2a9

    Solve problems with publishing a movie to your computer
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

    Let us know if this helps

    Concerning
    Anthony.

  • Expand collapse folders in my documents is not and jumps down and so I have to move the folders I want to actually see this all the time is there a default to always develop?

    Expand collapse folders in my documents is not and jumps down and so I have to move the folders I want to actually see this all the time is there a default to always develop?

    Also I have to move the colum line to the right all the time to see the date size etc. is there a default value or why not microsoft built in a value by default do not cut off the name of the file that I always have to make more time to see the full file name

    Thank you

    Greg

    Hello

    Unfortunately, you cannot save the settings for the fall down in my documents. As this is normal.
    If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft.
    https://connect.Microsoft.com/dashboard/Info/

    To resize the size of the column:
    1. you can resize the column by pointing the mouse on the name of the category.
    2. Once you can drag the slider to the right, double click it to get the optimal size.

    Thank you, and in what concerns:
    Swati Keni-Microsoft Support Engineer

  • I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

    I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

    Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

    have you tried using a different suite of cd/dvd burning?

    Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

    There may be something to play with your access keys if you have a (ie., wirekeys)

  • Since 2015.1 updated some .mov and other will not import video files

    Since the update to 2015.1 some of my mov files from various sources (some exported out of first, a lot are a set of overlays of light leak that I downloaded) will not import into first.  He said: "no Audio or Video Stream Found."  Well, I can open and play them in Quicktime or VLC, and I used them in my projects from before the update.  If I open an old project that contained these. MOV files (and it worked very well) that they are now offline.  If I try to make a link to the error, even.  I tried the old trick to change the directory where they are and cleaning, then my cache of media (have had problems with.) MTS files in the work stop spent) but no luck.  "No audio or video track not found) even if it is obvious that they still exist."  I have almost no extra codecs or anything of this nature installed, so no conflict.  Ugh.  Anyone else run into this?  Someone at - it a difficulty in addition to transcoding know everything?

    Well, I'm happy to report that I was wrong, and it was NO fault of Adobe Premiere.  I still have some other problems with the first update, but this problem was actually the result of my uninstall iTunes, which caused an error in Quicktime.

    When I started reading other peoples problems and reduced my problem until ProRes video and AAC audio, I found a few others who have said that they were having problems with Quicktime.  So I open Quicktime and tried to play the MOV files (usually use VLC Player) and of course, he could not play because "software of Apple service something or other assistance" has not been installed, the result of my uninstall iTunes, I assume (I had done this at the time I improved the first).  So, I installed a new Quicktime layer, and everything is back to working normally again!

    Sorry I have been quick to point the finger at Adobe, although the latest few have caused their share of questions for me, giving me reason to doubt.  In this case, however, it's for lack of my own/Apple.

Maybe you are looking for

  • FCPX Play Back Lag! Help, please!

    I have Final Cut 10.2.1 and I get some serious reading lag! "I tried the obvious choice, best quality unclicking also change the proxy, but nothing works." Here are the clips shot from a camera Canon T3I 1080 p. I have troubleshooted this thing and I

  • Size 50mm Macro life adapter/converter

    I own the lens macro 50mm f: 2.5.  This objective will focus to 1/2 size but for life-size Canon indicates that I need to buy their single adapter that cost an arm and a leg.  What is the advantage of using the adapter/converter Canon instead of use

  • How to format a 2 TB HDD Windows xp pro

    I just bought a Samsung 2 TB 32 MB cache hard drive. I partitioned and wanted to format the entire disk. I had a return of the small part and the rest unused. Do I have to load it a utility from microsoft or another company to perform this task? I se

  • SMB2 Version 1 vs. Version 0

    Asked me to check if a user is running version 1 of SMB2 as opposed to SMB2.  I track, but it is not how to spell it.  How do I know if they are using Version 1 or not?

  • ftwwrp32.dll is missing when you try to install Family Tree Maker 10 under Windows 7

    Hello I am trying to install Family Tree Maker 10 in Windows 7, but I get the error ftwwrp32.dll is missing. Family Tree Maker was already instaled on befor Windows Vista, the laptop is dead. I copied whole Famly Tree Maker file on disk. But I get th