KB2656353 & KB265637 try several time to install and get the error code 643

Similar Questions

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• Cannot install updated, get the error code 643

  Update Vista is a failure.  Get the error code 643

  Error 643:

  http://support.Microsoft.com/kb/923100/

  "When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install"1603"

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• try to update my CS5 and get the error Code: U43M1D207

  My web pages seems odd on the phones or tablets.

  It's clear when using a computer, but not the hand that held to design.
  All of the suggestions.

  Tried to update, but get the error U43M1D207 code

  Thank you & have a blessed day.

  Re: U43M1D207 error code

• try to do an update and get this error Code: U43M1D207

  try to do an update and get this error Code: U43M1D207

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

• Try to install the updates, get the error code 643

  I had probs installing updates for vista for the past 6 months... I get the error code 643... I can get help with this prob.... the latest help I got the tech was a snowflake... Please help if you can

  Hello sinner-40,

  Follow this Microsoft KB Article link;
  http://support.Microsoft.com/kb/976982
  hope this helps,
  Thank you
  Makoi

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I use Windows XP and get the error code 0 x 80070424 when you try to use Windows Update.

  When I try to access Windows update, I get an error code 0 x 80070424. I've read many threads, but want to make sure that the solution is for Windows XP

  Try this link

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

• try to install the updates and get the error code 606

  I am running windows7

  Do you really mean * 646 *? If so, see: http://support.microsoft.com/kb/2258121

  If not, then open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services run properly

  Otherwise:

  Do you have any other errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
     http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Try to install the fix it and get the error code 2503 and 2502

  Try to install the printer and fix this program. Get error 2503 and 2502 codes.

  Hello

  · What is the number and model of the printer you are trying to install?

  · Who solve this are you referring to?

  · You receive an error message with the error code?

  Delete the temporary files and folders on the computer and check if it helps. You can follow the procedure:

  a. click on start

  b. click on run

  (c) in the Open box type %temp%

  d. remove all files and folders in the location.

• Update of security of Silverlight won ' t install. Get the error code 0 x 656 when attempting to do.

  This is updated from Windows.  I was told the need update on a problem of security with Silverlight, then went for it and the installation to fail.  Said that the error code is 0 x 656.

  The search for a solution, I'm done on the page of Fixit which is supposed to automatically fix the problem.  Now the installation initializes, but that's all.  Still will not completely install.

  The reference for the problem that FixIt is supposed to fix is:

  Article ID: 943144 - last review: August 25, 2011 - revision: 13.0

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  I'm not if yes or no I installed SP3 without having to restart after installing SP2, this is what is meant by 'immediately' in the title of the article above.

  Will you restart and try again.

  Help!

  Hello

  Silverlight security are what update you referring? You can check the number of KB in the history of the update.

  Measures to ensure update history:

  1. click on Start, click all programsand then click Windows Update or Microsoft Update.

  2. on the Windows Update Web site or the Microsoft Update Web site, click view update history.

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• installation of photoshop cs4 on an iMac and get the error code of license for this product has stopped working.  What should I do?

  have the cs4 on a disk and installation on a new computer with no disk drive.  Drag the application to a stick and transferred to the new computer file.  but get this error code when I try to open.  any ideas?  Thanks for the help

  Sorry, BUT I must ask you if you followed the "important Instructions" as I've said above. Here is the screenshot:

  

• Impossible to create a system restore point and get the error code: 0 x 81000202.

  Original title: could not create a system restore point

  I have Windows 7 Edition home premium.

  I can't create a system restore point.

  I go to control panel > system and security > system > system protection

  and get the following error message:

  There was an unexpected error in the property page.

  The VSS service uses the system restore does not work.

  See the event log for more information. (0 x 81000202).

  I also ran a sysscan but all right.

  How can I create a system restore point?

  Thank you very much

  David

  If you have any software backup as totalrecovery pro 9 or norton ghost, they prevent you from creating a manual restore point.  I have 9 pro full recovery and everything I do is to disable the Recovery Manager when I want to create a manual restore point.  There is no problem with system restore points created they work very well it is the manual of who are the problem.

  Frank

• Try to install Windows Update to Explorer and get the error code 9 48

  This is the update for Windows Vista - have run microsoft fix and still I get this error - unable to determine what error - is anyone know?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/when-installing-Microsoft-Update-for-Windows/7448c660-0a05-4496-be8f-188a382578f8

  Keine IRB, post twice.

  UTC/GMT is 16:25 Wednesday, May 23, 2012