KB2675157 of a security update cumulative for Internet Explorer 8 for Windows Vista fails to install

Maintains a security update cumulative for Internet Explorer 8 for Windows Vista (KB2675157) do not install - tried "fix it" and that did not work - any ideas?

Hello

1. don't you make changes on the computer before the show?
2. what difficulties did you try?
3. do you get an error message?
4. are you able to install some other updates?

Method 1:
You can perform a clean boot, and then try to install the update and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

Method 2:
Try to manually download and check.
Update cumulative security for Internet Explorer 8 in Windows 7 (KB2675157)
Also check the link for more details.
MS12-023: for Internet Explorer Cumulative security update: 10 April 2012
http://support.Microsoft.com/kb/2675157

Method 3:
If the problem persists you can try the procedure described in the supplied knowledge base article and check.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

Tags: Windows

Similar Questions

  • A security update cumulative for Internet Explorer 8 in Windows Vista (KB978207) not installed correctly

    My PC vista Home Premium

    Hi guys, sorry for the long post, but I'll give as much detail that good I hope to get a positive result.

    I can not install the security update (KB978207) and get this message "some updates have not been installed security for Windows (KB978207) "

    I did the following

    1A tried to update manually with my disabled antivirus avast
    2 tried to uninstall manually after a clean boot
    3. downloaded and run microsoft Mr. Fix it
    4. I ran a few newspapers and displayed in a PC Tech Forum, I uninstalled a few unwanted files via Avenger that may have caused this error... no luck
    5. I used malwarebytes and nothing found
    6. I used HostsXpert and restored MS Hosts File.
    7. after sending a Windows Update of my recent activity log, it looks like a 3rd driver could be the cause of the problem, but I don't have a clue that one was the answer.

    I have no idea what to do at this point, I feel a little out of my depth now and have never had an update fails before.

    Any help would be welcome

    Thank you

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • A security update cumulative for Internet Explorer 8 for Windows XP (KB2183461)

    A security update cumulative for Internet Explorer 8 for Windows XP (KB2183461)
    installation fails every time.
    Guard appears as a critical update will not yet installed the patch.
    I have XP with service pack 3.
    I downloaded from a separate source located on a USB key and it does not this source either.  source of untrusted error.

    Hi AKharold,

    1. that you get any message or an error code when the installation fails?

    We recommend that you install the stand-alone file of this update and check the result. If the update fails, then post back the exact error code.

    Step 1: Install the standalone file of the update in safe mode
    a. download stand-alone file of the update:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=bc949915-4E16-4897-A295-2f99102548ab&displaylang=en
    b. save the file to the desktop and start the computer in safe mode
    See http://support.Microsoft.com/kb/315222/en-us
    c. log in as administrator and open the downloaded file to install it successfully.
    d. Once you have installed the update, restart the computer.

    Step 2: If step 1 fails, check windows update log file to find the error
    a. see http://support.microsoft.com/kb/902093
    b. retrieve the code error and after return details.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A security update cumulative for Internet Explorer 8 for Windows Vista (KB969897)

    A security update cumulative for Internet Explorer 8 for Windows Vista (KB969897)
    It's the new and important update on the 09.06.2009.
    I tried to install, an error code 80070570 appeared...

    How can I get this facility because it is under the status of "Important"?

    Please try the following: click Start > run > type the commands to follow in the area open (one at a time, in order):

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\wuapi.dll

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\wuaueng.dll

    RegSvr32 C: \ WINDOWS-system32-atl.dll

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\dllcache\wucltui.dll

    RegSvr32 C: \ WINDOWS-system32-c:\windows\system32\wups.dll

    Today, it was a good day, I didn't have to use my AK.

  • Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

    Original title: update KB2792100

    My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

    Hi Jeanlavanway,

    Thanks for posting your question in the Microsoft Community.

    From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

    I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

     

    To help you solve the problem, I would appreciate if you could answer the following question:

    1. you receive an error code or message?

    2 is the issue specific to some or all of the updates?

    3. have you made any recent hardware or exchange of software on your computer before the show?

    Please follow the methods and mark the question below:

    Method 1:

    Follow the steps in the link below.

     

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

    http://support.Microsoft.com/kb/2509997

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

     

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Method 2:

    I suggest you to install updates and check manually.

    MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

    http://support.Microsoft.com/kb/2792100

     

    A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

    http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

     

     

    I hope that the information above helps you.

    Your response is very important for us to ensure a proper resolution.

    In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

     

     

  • Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

    Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

    I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

    They did not work.  So, will you be able to help me find a solution?

    Thank you

    Ken

    Hello

    1. is that the copy of windows is enabled?

    2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

    I suggest to perform the steps in the following article and check.

    Method 1: run the Windows update troubleshooting tool and check.

    The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

    Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

    To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below for more details:

    How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
    http://support.Microsoft.com/kb/929135


    Note:
    When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

    Method 3: If the problem persists, follow the steps in the following article.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

     

    Note:

    un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

    How to back up and restore the registry in Windows

    b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    For reference:

    0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/946414

    Note:

    un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

  • Can not install a security update Cumulative for Internet Explorer 8 for Windows Vista (KB978207)

    I tried to download this update for over a month, but every time I try it fails. I get this error code:

    A security update cumulative for Internet Explorer 8 for Windows Vista (KB978207)

    Installation status: failed

    Error details: Code C 8007371

    Update type: Important.

    Can someone please help me I would be very happy! Thank you!

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • A security update cumulative for the ActiveX for Windows Vista (KB973346) cannot install stop bits since 15 July 09

    Hello

    I am using Vista Home Basic, but receive an error code:

    A security update cumulative for the stop bits ActiveX for Windows Vista (KB973346)

    Installation date:? 22 /? 08 /? 2009 12:32

    Installation status: failed

    Error details: Code 80242FFF

    Update type: Important

    Security issues have been identified in ActiveX controls that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided and authorized under the Windows Vista license terms.

    More information:
    http://go.Microsoft.com/fwlink/?LinkId=157386

    Help and Support:
    http://support.Microsoft.com

    Help, please?

    Thank you

    Hi Someonez,

    Error code 80242FFF means ' unexpected update generic Manager failed.
    So, I think that your windows update client could be damaged.

    Try to run the application on the following url fixit.
    http://support.microsoft.com/kb/971058

    Kind regards
    DFT IM me -TWiTTer: @DFTER

  • Update for Windows Vista (KB2505189), updated platform for Windows Vista (KB2117917) Supplement - french and a security update Cumulative for the ActiveX for Windows Vista (KB2508272) stop bits

    I have update for Windows Vista (KB2505189), platform update Supplement for Windows Vista (KB2117917) - french and Cumulative security update for ActiveX Killbits for Windows Vista (KB2508272). These updates get the 8007371B error code. I have Windows Vista 32-bit. I searched the Microsoft catalog available and tried a manual installation for these updates, but they have always failed. I have not yet tried to install it in safe mode. Is there anything else I can do to fix this?

    8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
    One or more required members of the transaction are not present.

    Only the specific return code can be solved by running system, aka CheckSUR update readiness tool -.

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    CheckSUR for taken over all the versions of basic x 86 (32 bit) Windows Vista

    When you are prompted to save CheckSUR, choose to not run it.
    When the download is complete, close all open programs and browsers.

    If the installed antivirus is Firewall Norton/McAfee party or a 3rd is used, then suggest you first boot system configuration before you run it.

    NOTE: In the clean boot state will be disabled all firewalls of part 3. Ensure that the native Vista firewall is now enabled - enable Windows Firewall on or off

    Now run CheckSUR (. Windows6 0-KB947821-v12-x 86.msu).
    Restart the system for the same configuration of boot clean and do a check for updates in Windows Update in Control Panel.
    If the system can search, detect, download, and install updates now, save an update of a subsequent test.

    If the system can or cannot now, cancel the clean boot configuration and restart in normal Windows mode.
    See if the registered update installs now.

    If the system still cannot install the updates, please copy and paste the contents of one of the newspapers that CheckSUR created when he ran. They are located in and are named

    Windows\Logs\CBS\CheckSUR.log
    Windows\Logs\CBS\CheckSUR.persist.log

    If the system can install the updates in the clean boot configuration, but not in normal mode of Windows, then there are 3rd party software which is the origin of the update installation problem.

  • How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

    I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

    I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

    How can I fix the corrupted windows components store?

    Thank you

    Dan

    CMDC,
    If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • A security update cumulative for Internet Explorer 9 for Windows Vista for systems x 64 (KB2675157) fails to install. Code 80071A2C.

    Original title: Windows Update security for Internet Explorer

     

    Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2675157)

    This update does not install on my computer. The error code is error details: Code 80071A2C.
    Please let know us if you have any information on how to install this update.
    I used MR. Fix and it still won't install.
    I use Google Chrome - whatever?
    Thank you

    Hello Ariel,.

     
    See the steps mentioned below and check if that helps.
    S tep 1:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Step 2:

    You can try to download the standalone update package and check if it installs:
    MS12-023: for Internet Explorer Cumulative security update: 10 April 2012
     
    Step 3:
     
    Try to reset the settings of Internet Explorer and then try to install the update.
    How to reset Internet Explorer settings
     
    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
    Hope this information helps.
  • MS11-057: a security update Cumulative for Internet Explorer 7 for Windows XP (KB2559049) + software updates fails SCCM

    Morning Microsoft,.

    I am facing a problem in my office environment (Windows XP SP3, Internet Explorer 7, software Trusteer report is NOT installed). We are trying to deploy a package to update all the post-SP3 XP critical and security patches and have problems with the update above.

    We use the SCCM synchronized with our server WSUS software update to deploy updates and it works very well in most parts.

    However this particular update appears to install (that is listed in Add/Remove Programs) However whenever the client checks for updates Windows he sees this as available, download, try to install it and indicates that a reboot is required... After a reboot, he's stuck in this cycle, each time that the client checks a Scan software deployment.

    It was on our test PC at the moment we have so removed from our upcoming updates and aboard. Everyone knows this and they can advise?

    Here are some excerpts from a newspaper of the customers on the update of the files

    WUAHandler.log (ignore the stop bits listed here update that installs very well)

    Async completed research.    WUAHandler 29/08/2011 09:55:58 6128 (0x17F0)
    Successfully completed the scan.    WUAHandler 29/08/2011 09:55:58 1788 (0x06FC)
    Go to search using the WSUS update source.    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
    Synchronous looking for all the updates started...    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
    Synchronous successfully looking for updates.    WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    1 update: 5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Update: dfec6275 - 7 d 47-4da6-bcee-d4f20e57acee, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    2 update: 5f08af04-7832-452f-9206-4289ed36f1b4, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Update: a9278996 - 22 c 7-4f60-9bd3-540d291c4bfd, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB980182) (5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    2 update (Missing): update rollup for the ActiveX for Windows XP (KB2562937) stop bits (5f08af04-7832-452f-9206-4289ed36f1b4, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Async updates installation has begun.    WUAHandler 29/08/2011 10:06:10 6032 (0 x 1790)
    Update 1 (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) completed the installation (0x00000000), reboot needed? Yes WUAHandler 29/08/2011-10:06:34 6060 (0x17AC)
    Update 2 (5f08af04-7832-452f-9206-4289ed36f1b4) completed the installation (0x00000000), reboot needed? No WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
    Async completed installation.    WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
    Installation of updates is complete.    WUAHandler 29/08/2011 10:06:43 3184 (0x0C70)
    Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:06:43 6032 (0 x 1790)
    Async completed research.    WUAHandler 29/08/2011 10:07:51 5740 (0x166C)
    Successfully completed the scan.    WUAHandler 29/08/2011 10:07:51 4644 (0 x 1224)
    Update (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) has completed the restart of the post operation. HResult: 0 x 00000000.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
    Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
    Async completed research.    WUAHandler 29/08/2011 10:40:29 3628 (0x0E2C)
    Successfully completed the scan.    WUAHandler 29/08/2011 10:40:30 5636 (0 x 1604)
    Go to search using the WSUS update source.    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
    Synchronous research began using the filter: "UpdateID ="7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe"AND DeploymentAction = *'...»    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
    Synchronous successfully looking for updates.    WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    1 update: 7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102 BundledUpdates: 1 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    Update: a7c0649d-f81c - 40 c 1-b247-b4e6bb990c8a, 101 BundledUpdates: 0 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB2559049) (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102) WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    Async updates installation has begun.    WUAHandler 30/08/2011 09:27:15 3848 (0x0F08)
    Update 1 (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe) completed the installation (0x00000000), reboot needed? Yes WUAHandler 30/08/2011 09:27:39 1656 (0 x 0678)
    Async completed installation.    WUAHandler 30/08/2011 09:27:39 5840 (0x16D0)
    Installation of updates is complete.    WUAHandler 30/08/2011 09:27:39 3848 (0x0F08)

    It is a forum for specific consumers. You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

    =======================

    You can encounter errors related to connect temporary [p. ex. 0x80072EFF; 0x80072EFE;] 0x80072EFD; 0x80072eef; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0X8024402F; 0x800705B4] when you use Windows Update or Microsoft Update [but not necessarily WSUS! ]  to install the updates
    http://support.Microsoft.com/kb/836941

  • A security update cumulative for Internet Explorer 9 for Windows Vista (KB2809289). Error details: Code 8E5E03FA.

    Tried to install the update Cumulative security for Internet Explorer 9 for Windows Vista (KB2809289) and it failed several times.  Error details: Code 8E5E03FA. Tried to disable the firewall and antivirus, nothing helped, also tried to download the update and install it in safe mode, did not help as well. Tried to run Microsoft Fix It, luck is. Can anyone offer any help with this?

    Boris

    Boris

    I had problems too with IE9 and it's updates... as you say all the other updates work I don't think that the Windows Update the question... is IE itself... IMHO...

    For days, I was getting the BSOD and it became progressively worse as the days passed... Now, I have all stable and works very well yet.

    If my suggestion for you is what I did... sort the problem at the source the progam in other - IE there is a form of corruption imho.

    First download and save IE9 to your download folder make sure you have the correct version, for example English Vista 64-bit

    Uninstall the current version... you may have to restart... I suggest you only do it anyway... It is cleaner that way. Then reinstall IE. I suggest that you set up with as few add on the as possible and add them at a later date, as and when you need it, preferably one at a time.

    Once you have reinstalled IE and restarted the kickoff of Windows Update If you have not automatically set to run... and I think that it will update the update of security OK.

    Good luck - let me know

  • A security update cumulative for Internet Explorer 9 for Windows Vista (KB2559049).

    Hello everyone, yesterday I received many updates to install via windows update. All have installed outside of a Cumulative security for Internet Explorer 9 for Windows Vista (KB2559049). I downloaded the update manually and tried to install it but still the same problem. When you restart the computer, the update fails to configure correctly. My operating system is Vista 32 bit. Any suggestions would be greatly appreciated.

    Thanks to OwtForNowt, another Member,

    I could solve the problem of the painful KB2559049 update.

    If as this same problem and they also Trusteer report installed on their system. Uninstall, reboot your system, check the updates with windows update and try to install KB2559049 and if your lucky like me your see that long-awaited complete message of 100% of configuration and installed updates.

    Good luck.

    Thank you all for your help and solutions to this problem.

Maybe you are looking for