KB954430 installed in 4 different locations in Windows 7 (64) even if Windows Update Failed. __

Similar Questions

• I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions.

  I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions. Failed updates are as follows: "Security update for MS Core abuse 4 SP3 (kb2721691)" "Security Update for MS NetFrame Work 3.0 SP2 on Windows Sever 2003 & Win XP x 86 (kb2656407)" "as last but Frame Work 2.0 SP2 & (kb2604092) ' and finally 'as last but (2604110 kb)" How can I get these updates installed? "

  Hello

  Thank you for your response.

  Safe mode is different from boot were the clean boot will help disable you any of third-party applications or starting points which is the source of the problem.

  Also I suggest you to see link below and check if it helps.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798/

  Hope this information is useful.

• Windows update fails to install with error 57F

  Since June 11 3 updates of MS - Office Outlook KB 970011, MS Word KB 969603 & MS Excel KB969681 failed to install. The error code is 57th
  This happens every time the pc is switched on/off.
  I tried to install manually via start / all programs/windows update but it also fails
  running Norton anti-virus software

  Hello Mcleod233,

  Thanks for reading, I appreciate it.

  It's great to hear.

  Hooray! Uday $012 please let me know if the solution worked or not I can improve, I thank you and appreciate your feedback, because it's the only one I can see I can improve.

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

  Code 8007045 that appear when Windows Update fails to install important updates

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update fails, try to install paths

  Windows update fails when trying to install kb976884,
  KB974234 and kb974810 in Outlook 2007. The error code is 80070641. ¿Could someone help me please?
  Thanks in advance and best regards,

  Try searching for these updates in this link: http://www.microsoft.com/downloads/en/results.aspx?freetext=kb976884&displaylang=en&stype=s_basic

  Download these update by searching in the link above
  Save it to the desktop and try to install them that should help you ;)

• Windows Update failed to install KB2506212. Tried several times (6) and it continues to fail. Any ideas?

  Windows Update failed to install KB2506212. Tried several times (6) and it continues to fail. Any ideas?

  Mark s.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Windows Update fails to install updates three KB2686833, KB2699988 and KB2709162, with the error code 8E5E03FB

  I am running Windows Vista and Windows Update fails to install three updates... KB2686833, KB2699988 and KB2709162... the error code is 8E5E03FB which I can't find a solution for anywhere... Please help

  Original title: anyone know where I can find a solution for error code 8E5E03FB

  I looked in the help and the Microsoft Web site in the world.  I tried to startup using MSconfig, activate and deactivate services, I tried the Microsoft Update Catalog.  I started by not being able to install six updates and now got it to three and have grown tired of trying to figure it out by myself.

  If you have tried everything, including a repair install as stated in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/8e5e03fb-one-of-five-error-codes/71180dc5-75EA-49D8-b419-60454e79c83f

  You've done everything mentioned in this article?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-update-fails-to-install-with-error-code/c811f435-0e3b-4609-ae39-b441bf4072a9

• Windows update fails to install KB2656368 and KB2686827. Get the code641 error

  Original title:

  Windows update fails to install KB2656368 and KB2686827

  I am running Vista Home Premium.  Windows update fails to install KB2656368 and KB2686827.  Download error code641 which seems to mean that Windows cannot identify the problem.  In the past, it was caused because the installer has been damaged.  In setting the Microsoft Support took control of my computer; Download a new installer and solved the problem.  However, it seems that there is no way of contacting Microsoft Support for them to fix the installation program.  The installation program be fixed right now.  Moreover, the tool "Fixit" said that everything is fine.

  Microsoft paid $99 for the support.  Tech uploaded a new installer.  Problem solved!

  Still wondering why the question about System Mechanic?

• Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663

  WindowsUpdate_80070663

  Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate

  Hi Juan CarlosPatlan,.

  Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.

  Reset the Windows Update components

  System analysis tool

  Cannot install updates

  Troubleshooting of Windows Update (same steps for Vista)

  If you are unable to install the updates, provide the following information:

  • The full version of Windows you have installed
  • KB # the update fails
  • The troubleshooting steps you have tried

• Windows update fails to download and install updates and cannot start defender and windows firewall.

  Original title: windows update fails problems to download and install the updates and windows firewall and defender will also not start?

  Windows update fails to download and install the updates and defender and windows firewall will not also start? What can I do?

  Hi Speete66,

  ·         You receive an error message or error code in Windows Update?

  ·         What happens when you try to start the windows firewall and windows defender? You receive an error message?

  ·         You have any other antivirus software or protection installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it helps.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2:  If the method above does not help, then you can reset Windows Update components and check.

  Reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know the results.

• Windows Update fail to install

  original title: significant problems with Vista and Windows Update

  I'm trying to reinstall Vista. I keep running into a problem where some Windows updates fail, even when you check the history they are reported as installed. In some cases, a patch will be reported as installed once and failed three times. Often, failures are dated later than the initial success.

  If that fails, the machine does not start and I am presented with a screen asking you to go into the various forms of safe mode. What I do is starting on the installation DVD and running Startup Repair. It seems according to the most recent restore point and setting the startup process. Then, it seems that some of the fixes that have been initially successful are now chess.
  The laptop in question is a Dell Inspiron 1420 running on Vista. I did a clean install on the startup disk.
  What the hell is happening? I just want to make with this stupid installation, but I can't return the phone to its owner until each update is applied. Any help is appreciated.

  I'm not stupid either, Chief. When I got the laptop back to its owner, a virus checker will be up and active. I am a fairly advanced user so that I can get without it if I'm only hitting servers of Ms.

  Owner of the laptop is going to be behind a hardware router wireless surfing, although I go to the firewall as an extra precaution.
  Everything is up-to-date. There is no more patches. IE 9 is good to go. I don't understand how IE is critical to the security of Windows. I want that the owner of the laptop to use Chrome, because frankly it's faster and better than IE for the web standard handles.
  Have a good weekend.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.