KB955430 Vista update

Update for Windows Vista (KB955430)

I got updates Vista 2, listed on the update page that I do not want to install: Silverlight, which has been registered for a few months and direct updates, which have been listed for several weeks.

That is until last week when the 2 updates above have been no more listed but in their place, has been updated for KB955430 Vista.

I read the description of the update above, however, although it says there is some Live updates, I would like a breakdown of exactly what is included.

Also, since I downloaded IE8 Windows Explorer crashes from time to time.  I downloaded IE8 three times.  The first time, 2 times the incidents were constant and I was forced to restore.  This latest attempt was much better, even though I continue to suffer an accident from time to time.

Someone will help me to determine exactly what it means the new Vista updates and if there is a work around US crashes?

Thank you

Camiele

Camiele salvation,

Get rid of IE8 - MS put knowing there was many problems of compatibility to this subject (or you can wait on MS to provide patches). Also, try to uninstall everything that you updated this day there "first" installation of IE8. In addition, make a system restore point before installing IE8. If you are concerned about the security updates, they will reappear in implemented sub to update Windows again - then reinstall. I hope this helps. Have a nice day :)

Tags: Windows

Similar Questions

  • Impossible to install Vista updates

    I use Vista 32 bit, family premium, SP1, latest installed update is KB955430. Download and install the updates seem to work - until the moment where my system wants to "configurations". Here, the system stops and removes the installed updates.

    What I've done so far:

    -Tried to install SP2 - no success

    -Tried to install the file "MicrosoftFixit50202.msi" - with no success

    -Tried to install the file "au_check_v78f.exe" - no success

    -Follow all the steps (manually, too) of http://support.microsoft.com/Default.aspx?scid=kb%3ben-us%3b971058&x=10&y=4 - unsuccessfully

    The 'CBS log.zip' file indicates a missing file without saying which file it should be.

    It makes me crazy... Please advice what else should I do to install the latest Vista updates successfully. Thank you very much.

    Hello

    the command

    wevtutil.exe cannot read certain registry values:

    SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SP2

    Sp2 also fails to check the installed (Service Pack

    2010-02-10 18:27:04, error CBS SPI: (SPCVerifyTrust:1732) could not CryptCATAdminCalcHashFromFileHandle GLE = 0 x 57

    2010-02-10 18:27:04, info CBS SPI: installed SPInstall or XML not approved.  It continues with the current version).

    The checksum of the SP2 cab file also fails, so the expandition fails)

    (CSelfExpander::InternalExpandFile:382) Checksum of the downloaded file (0x95a57df7) does not match expected (0xef7dc8a4) er = 0xd

    2010-02-10 18:29:51, error CBS SPI: (CSelfExpander::ExpandFiles:227) Interior cannot expand file Windows6. 0 - kb948465 - X 86 .cab hr = 0x8007000d)

    Download and run the preparation tool for Windows Vista (KB947821) system update. He's trying to fix the problems, which may prevent you from installing Sp2 and other updates. This tool generates a checkSUR.log file C:\Windows\Logs\CBS. Open it and see if there are still questions that cannot be resolved.

    Do a start-up in minimal mode and tr to install Sp2 it. Perhaps other tools to block installation of the Sp2.

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Vista update and we now have a black wallpaper - Satellite P300

    Windows Vista update last night on our P300 laptop and is now rather weird.

    We get only a black background solid and a lot of the icons that we had are gone, and it will not change the wallpaper. Most of the programs are not loading at startup as usual (only anti virus) and most of the things are missing from the start menu... it happened to anyone before? It sounds almost to what they do when you have a pirate copy of Vista (and of course this one IS legitimate as it came with the lappy)...

    Any suggestings?

    I did not physically see the laptop and won't til tomorrow myself... Although my companion knowing its probably just something simple but thought check here around before that snack.

    Thanks :)

    Solved the problem...

    A windows update some how corrupted the registry.

    I hit log off in windows and then tried clicking on the user name to connect (we just auto journal in value) and when trying to load the profile, we had a service user profile Service has no logon.

    A system restore fixed the issue... :)

  • Satellite P100-442 - sound after Vista update problem

    Vista Home Premium operating system.

    Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
    It does that after I do a "ch for devices modified" via "Device Manager".
    But I do whenever I have start the laptop.
    Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

    Try to restore to an earlier time using System Restore option.

    If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

  • Satellite A300 starts after Vista update

    Hello everyone!

    I had a problem with my Satellite A300. After installing Vista updates laptop is restart automatically, so it is not commissioning and screan is black, but buttons is the lighting, the cooler works.

    You have a solution to this problem?

    Hello

    Remove the battery, disconnect the adapter and wait for about 30 minutes.
    Then reconnect both parties and try to turn on the laptop.

    Check it out!

  • After that Vista update of my Satellite L40 won't start

    After automatic Vista update of my boot of t n for laptop and the screen is black. Using the F8 key I have the advanced startup options, but none of them helps. The screen remains black. Hard drive led is always off.

    I have Satellite L40. I restored the OS using Toshiba drive. All data has been lost. After 2 or 3 days, update has been installed again and I noticed the same problem. What can I do?

    Please help me!

    For me, there is only one option: disable the automatic update to Vista.

    By the way: when that happen, have you tried to boot the operating system in safe mode and roll back OS to an earlier time using System Restore tool?

  • can not find platform for windows vista update

    my computer does not find the platform for windows vista update and I can't find anywhere to download from. Help! is there anywhere I can download that has not removed?

    Only-how to get updates of platform for Windows Server 2008 and Windows Vista Windows Update the platform update for Windows Server 2008 and for Windows Vista platform update can be downloaded from Windows Update. To obtain these updates, follow these steps:

    1. Click Start, click all programsand then clickWindows Update.
    2. In the navigation pane, click check for updates.
    3. When updates are found, click view available updates.
    4. Select the package to update that you want, and then click install.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

    To get the updates recommended for your computer and important, underRecommended updates, select the include updates in downloading, installing, or informs me of the box put up-to-date recommended.

    You check parameters WU to ensure that you get a list of bottlenecks and recommended.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Update failed - Vista updates

    Display all installed updates, most "managed" in the descriptor, but many have "failed". Are these failed updates too hard disk space? If so, how can I recover this space? I have 4 separate instances of 'fail' Win XP SP3. But I installed a legal copy of Windows XP Office Professional with FrontPage on my computer (it works perfectly), so I thought that XP SP3 would be advantageous. It turns out that it wasn't. (I know, I am running Vista Home Premium, but that was before I knew what I was doing with Windows Update). Can anyone help?

    You must do what I suggested... If you want to UNINSTALL an update. Don't are not updates failed
    installed. Its an entry in a database, deletion of the list only removes the entry.

    Installed for
    http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

    Disable - hide
    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

    Ms:

    Did you know you can manually install an update that may not have?

    "To manually download available updates, go to Microsoft Update or in.
    Windows Vista go to your control panel. When the computer has been scanned
    to see the updates it needs, click the custom button to find and choose
    the update to install. We recommend that you only install all the priority
    Security and critical updates immediately.

    "We recommend that you get the updates automatically on your PC.
    When your computer is turned on and connected to the Internet, the most recent
    security updates are automatically downloaded and installed. To learn how
    activate the automatic update of your operating system, see update
    your computer automatically. »

    Be careful what you wish:

    How to remove and reinstall all windows updates
    http://www.online-tech-tips.com/computer-tips/how-to-remove-and-reinstall-all-Windows-updates/

    Files here:

    "C:\Windows\SoftwareDistribution\Download".

    You can remove the list of historical updates

    ONCE DELETED, IT CAN NOT BE RECOVERED

    Start - all programs - accessories.
    Make a right click - Guest - run as administrator

    net stop wuauserv
    Ok

    After a while, there will be a confirmation that the service is stopped.

    To remove the file - copy at the command prompt

    del %systemroot%\SoftwareDistribution\DataStore\Logs\edb.log

    http://en.kioskea.NET/FAQ/Sujet-1242-clear-history-updates-with-Vista

    Rob - bike

  • X 64 Vista update problems... KB2479628 & KB2393802

    Hi, I had / have problems with Vista updates:

    I can not install more than one at once otherwise that it crashes a BSOD. It's annoying, but I can live with that...

    The latest issue (I wonder about that) which is the last batch of updates (I'm sure it's one of these two: KB2479628 & KB2393802) is making my PC run unstable and stop my antivirus to work.

    When either are installed, my pc freezes at startup and can or cannot enter Vista (safe mode still works). When he gets into Vista, MSE shows a symbol of error indicating that it is not functional / turned on. When I try to turn it on, I get a gel complete system requiring a hard reboot.

    OK, I realized I remember little about it... so I'll reinstall tomorrow and I hope to give more details later

    Repost: only one 1 antivirus should be installed & loading at startup!

    1. disable the Timer of Spybot the & leave this option unchecked for now. See http://aumha.net/viewtopic.php?f=26&t=32409

    • If you do not fully understand what Tea Timer does and how it does, leave it off permanently.

    2 uninstall Avast5 or Microsoft Security Essentials & restart.

    3 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    4. open IE8 32 bit (only) to http://support.microsoft.com/kb/971058 [ignore the section will APPLY to] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    5 restart once again & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

    After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

    Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

    10. restart once again & test.

    NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Vista update problems

    A WEEK ago, I HAD OF PROBLEMS UPDATES.IT DOWNLOAD & INSTALLATION RESTERAIT at 0%, I FOLLOW SOME IDEAS, HELP & IT SEEMED WORKING HOWEVER THE LAST UPDATE FINALLY INSTALLAIT ON THE 17th that'S GOOD what HE SAID LAST updates INSTALLED ON 17, BUT WHEN YOU click TO VIEW HISTORY of UPDATE I HAVE MORE RECENT UPDATES OF SECURITY ESS. DAILY & SOMETHING ELSE. THEN WHY does STILL SAY AFTER VERIFICATION OF UPDATES, INSTALLATION updates SHE WILL see THE GOOD TIME & DATE TO the LAST TIME HE CHECKED a DAY & SAID ALWAYS UPDATED ON 17 updates?

    Don't know.

    http://Windows.Microsoft.com/en-us/Windows-Vista/updating-your-computer

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Try to install the Vista updates, but getting the 8024200d error code. Help, please!

    Try to install the security update KB967723 and Vista updates KB970430 and KB972145.  Constantly getting error 8024200d code.  Help, please!

    Error 0x8024200D code is:
    SUS_E_UH_NEEDANOTHERDOWNLOAD
    The Setup program requires more data to download

    1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB967723&displaylang=en&stype=s_basic

    2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB970430&displaylang=en&stype=s_basic

    3. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB972145&displaylang=en&stype=s_basic

    You can try to manually download and install.

    or you can reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    and try again.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Cannot step 3 of 3 for Vista updates

    I have a number of Vista updates that will not be installed.  A site to help/support windows was a suggestion that you could install manually by going to the Microsoft Vista download site.  So, I chose the 2 most old and manually, and to install several days ago.  In both cases, an error message came back indicating that the updates were for a 64 bit system.  Later that night I turned off the computer and turned it on the next morning.  I got a message saying Setup updated step 1 of 3-0% complete.  This message has been on the computer for several hours before I did a manual close.  Now, when I reboot, the message says configuration updates step 3 of 3-0% complete.  This message will remain on the computer for about 1 minute, after which the system attempts to restart again.  This process continues indefinitely.  I tried to go in 'safe mode', but the same thing happens.  I do not have a startup disk, so may not exercise this option.  Please help - I'm sure that the solution cannot be that hard.  Also, please tell us if there is a way to avoid this situation in the future.

    most of the computers I sold recently are affected - ms Ko 949358 describes this well - using repair CD allows you to rename the folder (files) waiting - but - so far, the problem always resurfaced after 2 or 3 days - repair ms KO suggested in the previous KB 937287 update will not - install version wrong system error - now the good news : change of name by using CD repair can be done repeatedly and will copy/backup all files on an external user - using a full system reinstall after a cold start automatic tracking updates (about 100) will produce a system vista stable basic with no missing updates.

  • Vista update error code 643, 490 & 8007371B

    I'm running Vista Ultimate and months get error code 643, 490 & 8007371 B and despite the exyensive the search for solutions, I can not only solve these problems to download. It seems that the absence of these downloads are inhibiting the SP1 update.  Can anyone help?  DELBOY22

    * Title *.
    Vista update error codes

    Hello

    a. updates you trying to install?
    have b. you tried the troubleshooting steps?
    You can try the steps outlined in the article below and check if it helps.
    http://support.Microsoft.com/kb/958052
     
    Check also the updates fail to install in windows update history. After the same return so we can help you better.
     
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista updates (12 April 2010) broke all the desktop shortcuts

    On 13 April, I fist notice this problem. I managed to it is resolved according to restore my computer to a previous point prior to the windows vista update have been installed. I didn't create a new restore point and also forgot to uncheck "automatic installation of windows. A few days later, the same problem after updates have been installed again on April 15. Unfortunately, this time I don't have a restore point previous April 15. So, I restored it on next day 16, but not resolved the issue. So I uninstall all vista windows update installed on April 15 but did not help either.

    Fortunately it affects only an admin user (user account that run windows update) all users are very well.

    Any suggestions to solve this problem, much appreciated.

    Kind regards

    lmaestro

    SOLVED. It is a Virus. A villain. For more information, see URL below:

    http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/039ceca1-c81f-4136-8c04-bf13c0378495

    I followed the comments posted by "lilvtboiraver" about the "Regetry Exchange" and it solved this problem.

    Thank you

Maybe you are looking for

  • Update the Bios Satellite P10

    How can I apply the latest update of the BIOS for this machine.Download wants to write a 1.44 MB diskette and the P10 804 does not come with a floppy drive!

  • Satellite P300 - 20 H - AC adapter / CC died

    Hello My crowbar of ac adapter is not working... it does not get hot, it isn't turning on my computer, which is running out of juice completely and can now be started. I changed my power settings while I'd still have a good amount of battery power le

  • Satellite A300-177 - Pioneer DVD - RW KD08A stopped reading discs

    The car has worked since the machine was purchased. Today, there has been a problem When you put in a disk, it rotates - but made much more noise than usual, then stops. And that's all. The machine - running Vista - does not recognize that there is a

  • When I try to download efax messenger (the fax online), I get this message.

    Installation information: Could not open key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current Verison\Run\Optional Components\IMail. Check that you have sufficient access to that key, or contact your support staff.

  • Pavilion G7-1328dx: I have a problem with recovery disks

    I have recived a message error (error bios 501) was one that says windows could not start at this point I did a system restore, it worked then it instaled updates and when I turned it off it seamed ok a few days elapsed before I go back and it didn't