KB971029 is offered, but receive error message 'not applicable for this system.

I had some freezes during the game Fallout3, so I got out and checked the update of Windows, because it is Tuesday, and I thought maybe it was attempts to update that was the problem. While you wait for the update to initialize, I went to the event viewer to see if some other glitch was responsible, and I saw @40 instances of this warning message:

KB971029 is not applicable to this system.

I stopped the update and rebooted to get some info, and it still has this update queued for installation. Can I ignore this as I did with the outdated ATI driver update which was on every list updated for many months?

If it is so upsetting to you, a clean install will fix everything, Tom. Post in this thread and follow these instructions, see the ANSWER (to the letter and in the order!) to restore your computer to a State safe & functional.

If it was my computer, I don't think I would just because an option, no security-related update wouldn't install... especially when all the security critical updates have been setup very well.

In & out.

Tags: Windows

Similar Questions

  • After installing the updates, event viewer says "Some of the updates are not applicable for this system"

    I have a laptop Toshiba Satellite L355D-57901.  I am running Windows Vista Home Premium SP2.  I have the updatedWindows updates in place so that I can revisit before installing.  After you install the updates, I noticed for some time that when I check myEvent Viewer , there are several errors indicating that "Windows Servicing identified that package (the number of update i.e. KB980436 (security update) is not applicable to this system .).   Can you please tell me why?  Thank you very much.

    Hi Simply4real,

    Check out the link below to a thread with similar problem and check if it helps.

    http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c6883a0c-FF12-4bcd-86e0-4af3006eb7ce/

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Servicing identified that package KB972036 (Update) is not applicable to this system

    How can I get rid of this update? I find only information for the installation of updates failed, nothing on the automatic reception of an update through Windows Update that is not valid for my system.

    Windows Vista Home Pemium Service Pack 2
    HP Pavilion DV6700
    Microsoft Office is NOT installed, only the viewers

    "Windows Servicing identified that package KB972036 (Update) is not applicable to this system"

    "Windows Servicing has not finished the process of change update 972036-11_neutral_LDR of State of Staged (Staged) packaging KB972036 (Update)"

    Log name: System
    Source: Microsoft-Windows-maintenance
    Date: 2009-09-02 10:52:50
    Event ID: 4375
    Task category: no
    Level: error
    Keywords: Classic
    User: T24622056-PC\Alan
    Computer: T24622056-PC
    Description:
    Windows Servicing failed to complete the process of the package configuration KB972036 (Update) in install Requested(Install Requested) State
    The event XML:

     
       
        4375
        0
        2
        0
        0
        0 x 80000000000000
       
        103100
       
       
        System
        T24622056-PC
       
     

     
       
          KB972036
          Update
          Install requested
          Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0
          Installed
          True
          0 x 80070643
          Fake
         
         

       

     

    Hi BrechbieIAD,

    Welcome to Microsoft Vista answers Forum!

    I have a few here that might solve the problem.

    Step 1:

    You may need to start the computer in safe mode and uninstall the update, follow these steps to start the computer in safe mode:

    1 restart your computer if it is running.

    2. tap on the F8 key after your initially on powers computer.

    3. Once you see the menu Advanced Boot Options, you can stop tapping.

    4. use the up/down arrow keys to highlight your selection.

    5. Select Mode safe mode with networking and press ENTER.

    6. you should see loading drivers and wait please.

    7. you should then be at the Welcome screen.

    8. connect to your computer using an account with administrator privileges.

    See the link: http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

    Step 2:

    Now, you may need to delete the contents of the download on your system folder, follow these steps:

    Click Start > type download in the start search > delete the folder KB972036.

    Step 3:

    Now, run Windows Update and allow to install KB972036.

    After Windows Update has finished reboot normally and everything should be fixed.

    Hope this information is useful.
    Let me know if it worked.
    All the best!

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Receive error message, not allowed to enter the Cookies files in Vista

    When I go to Cookies, computer says I'm not allowed to this file... Why is this... I try to keep my cookies for a minum and do not want to use delete temporary files and cookies... because it removes all cookies and I have to sign on some new web pages... can you help me thanks

    Hello

    Cookies: Frequently asked questions
    http://windowshelp.Microsoft.com/Windows/en-us/help/c9daa36b-3bc0-47fa-aea1-5a250e2b4e561033.mspx

    How to allow or block Cookies in Internet Explorer for Vistahttp://www.vistax64.com/tutorials/60641-cookies.html

    Block or allow cookies
    http://windowshelp.Microsoft.com/Windows/en-us/help/ff035adb-411D-40F3-8F9F-23e158f7b8be1033.mspx
    Cookie Viewer - free
    http://www.KarenWare.com/PowerTools/ptcookie.asp

    CCleaner - free (allows you to protect specific cookies from deletion by CCleaner.)
    http://www.CCleaner.com/

    ======================================================

    Here are some easy ways to Take Ownership and Grant Full Admin Control

    Add 'Ownership' to the Menu Popup Explorer in Windows 7 or Vista
    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

    How to add appropriate to the context Menu in Vista
    http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

    Take and Grant Full Control permissions and ownership in Windows 7 or Vista right click Menu
    http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-Windows-7-or-Vista-right-click-menu/

    --------------------------------------------------------------------------------------------

    How to take possession of an item in Vista
    http://www.Vistax64.com/tutorials/67717-take-ownership-file.html

    How to change the permissions on the folders
    http://www.Vistax64.com/tutorials/157304-folder-permissions.html

    ===================================================

    From a post by Rehman F.

    Here are the steps to change the ownership and permissions of files and folders:

    1. right click on the file or folder, click Properties, and then click the Security tab.

    2. click on advanced and then click the owner tab.

    3. click on edit and then do one of the following:

    ·    To change the owner to a user or group that is not listed, click other users and groups, and in the box type
    the object name to select (examples), type the name of the user or group, and then click OK.

    ·    To change the owner to a user or a group is listed in the change owner to box, click the new owner.

    4. If you want to take ownership of the contents of the folder, select the replace the owner of sub containers and objects check box.

    5. click OK and then click Yes when you receive the following message is displayed:

    You are not allowed to read the contents of directory folder name. You want to replace the directory
    permissions with permissions granting you full control?

    All permissions will be replaced if you click Yes.

    Note folder_name is the name of the folder you want to take charge.

    6. click on OK and then reapply the permissions and security settings that you want for the folder and its contents.

    Additional considerations

    7· An administrator can take ownership of any file on the computer.

    8· Affecting the ownership of a file or a folder might require that raise you your permissions using user access control

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Try to download Adobe Photoshop Lightroom 5.7.1 but receive error messages

    Link from your site gives the error message constantly

    kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  • Error message: not available with this Apple ID update

    App Store displays the available updates, but after choosing "Update", the error message starts "Update not available with this Apple ID" appears. All of the applications in question were purchased with the current Apple ID.

    Mac Pro (2008), 10.11.4

    Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.

    Step 1

    If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.

    Step 2

    A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.

    Step 3

    If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.

    If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.

    Step 4

    If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. If necessary, you will be asked for the part number of the DVD.

    Step 5

    In the App Store menu bar, select

    Store ▹ view my account

    Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.

  • When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

    Original title: Code43 error (built-in) Bluetooth

    I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

    that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

    Hi DerekWilliams,

    What is the brand and model of your system?

    You can try the following steps and check if it helps:

    Method 1:

    Try to run the corner hardware store and check the issue.

    Convenience hardware store

    For more information, see the article:

    Code 43: Windows has stopped this device because it has reported problems

    Method 2:

    You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

    For more information, see the articles:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • Error message 692 interviewed for this modem using Diagnostics

    MODEM ANSWERS ONLY NOT WITH THE HELP OF DIAL-UP

    Have Dell Latitude C610 BIOS Version A16.  Cannot access the internet through dial-up; no problem with a wireless card.  Get error message 692.  Questioned on this modem Diagnostics using get the message "Modem has failed.  If the internal modem (Yes), check that the interrupt for the port correctly. "This laptop was purchased on E - Bay and provided with Windows 2000 (original software XP ripped off?).  Later upgraded to Professional Windows XP & Service Pack 3.

    Hi Knomee,

    I think it's the XP driver for our modem under "" Communication", you could check:

    Click here

    You can also view updated BIOS firmware from this same page.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP 2300 error "cartridge not intended for this printer.

    Hello

    I recently completed a 94 black ink cartridge and when I installed it, a message appeared: "black cartridge inserted now is not intended for use in this printer."  First and only time I had a reflilled of the cartridge.  How to operate?

    Sounds like a user related error message. Unfortunately, some machines can detect if the cartridge has been tampered with or reused. For various reasons, reload a cartridge is not recommended because it may harm your machine. This error message indicates that the power connection is damaged, and probably the error will remain until a new cartridge is bought to replace the old.

    I assure you that although the reloaded cartridges work much of the time, they have a failure rate much higer and the factors that can affect the mechanics of the machine at all times.

    I would like to know if this is the information that you need!

    -Spencer

    PS have a great weeekend!

  • Receive error message "not created Direct 3D engine" when starting of Driving simulator 2012

    Original title: Direct 3D engine has not created

    When you start Driving simulator 2012 I get this message. Help, please!

    Thank you.

    Hello

    Update the video card drivers and check

    How to manage devices in Windows XP

    Hope this information helps.

  • Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

    Internet connection xp

    I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
    ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
    It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

    I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

  • Cannot install KB980182 + 17 other updates - error 0x8007371c or "does not apply to this system".

    I am running Vista Home Premium with Service Pack 2, 32-bit. For example, I have the 8.0.6001.18828 version. I use AVAST AV and Comodo Firewall. I've never had McAfee.

    I have 18 'Important' Windows Vista updates will not be installed: several updates, several windows Vista updates, etc. Back to 08/12/09 and 27/04/10 the most recent. They start to add up. Here is a screenshot of them:

    http://img94.imageshack.us/img94/5003/updatesl.PNG

    For about 11 of them, let's say in the meantime (until restarted), but then after the resumption, that they do not have to install but have no error code. The event viewer indicates that they are 'not applicable for this system' (then why they have been downloaded?). Who does not apply are: KB905866 KB971468, KB972270 KB979683 KB978601, KB977816, KB978338, KB979099, KB974318, KB980248, KB980232.

    The rest of them, as (for example, KB980182) will fail because of an error of 8007371 C. In Event Viewer, they all have a sequence of error similar to this one (it's for KB980182):

    ###

    11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
    11:10 - Windows Servicing has not completed the process of change update 980182-39_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
    11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
    11:10 - Windows Servicing has not completed the process of change update 980182-38_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
    11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
    11:10 - Windows Servicing has not completed the process of change update 980182-37_neutral_PACKAGE of packaging KB980182 (Update) in Staged (Staged) State
    11:10 - Windows Servicing has completed the process of configuration KB980182 (update) package in State to install Requested(Install Requested)
    11:10 - Windows Servicing has not completed the process of change update 980182-2_neutral_GDR of packaging KB980182 (Update) in Staged (Staged) State
    ...
    [several other of these errors, with '2' to 36, even numbers only]
    ...
    11:11 - Installation failure: Windows failed to install the following update with error 0x8007371c: Cumulative security update for Internet Explorer 8 for Windows Vista (KB980182).

    ###

    Things I've tried:

    1. installation after a clean boot - at first, seems to be successful that I can get the list to the left of 1 or 2, but at some point given shortly after they all reappear.

    2A ran the System File Checker that comes up: "Windows Resource Protection has not found any breach of integrity."

    3 reset Windows Update components (manually or with the "FixIt" solution to http://support.microsoft.com/default.aspx/kb/971058?p=1)

    4. stop of services related to Windows Update, rename system folders, saving and then associated DLL files by restarting services (as described here: http://social.answers.microsoft.com/Forums/en/vistainstall/thread/ed275467-5580-41dc-9ccc-3c1e22c6fd28)-same result

    5 install in safe mode - gives me "Setup has encountered an error: 0x8007043c.» This service cannot be started in safe mode. »)

    6. scan the hard disk for errors (e.g., check disc) - Nothing found

    7. search for viruses, Trojans and malware - do not have

    8. install with UAC, anti-virus and firewall off the coast - same result

    9 install the upgrade preparation tool system for Windows Vista (KB947821) [January 2010] (with UAC, AV, etc off), but the installation 'failed' (no error code). Installation in safe mode it gives me the «...» "0x8007043c. this service cannot be started in safe mode."

    10. manually install them - same result

    A short circuit contact MS have exhausted the options?

    Thank you. This is not a beta or Release Candidate build both fuhgeddaboutit and open a free support incident.

    PS: I think you will find that the updates are not installed due to infection hijackware, Kurt.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Not available for this device message

    I have published a new version of my App App store displays message "not available for this device. My test device is in the list of active devices and minimum operating system level is reached. However, I am currently in the country that is not in the list of countries where my app is available. Could that be the reason why I see the error message?

    This is just my position. When I came back to my country, the error message disappered.

    Doesn't seem to be a clear error message for me. Must be something like "Not available for this country", or in fact, it should allow just update me my application.

  • CS4 components stopped working. Error 150:30 - license for this product has stopped working. How can I fix it?

    Last week, I had to wipe my hard drive, reinstalling OS X 10.10.4 (then update to 10.10.5) and restore all my files. I do not often use the CS4 but I needed to open Dreamweaver CS4 just now and all first, he wanted Java Runtime 6 - that I found and installed. Now I get the 150:30 error message: a license for this product has stopped working. I have the SN of the project - it is registered. But I can not get Dreamweaver or Photoshop (or any what other applications in the package, I guess) to run. What should I do to remedy this? As I said, I do not often use CS4, but sometimes I have to get to some old files using Dreamweaver and Photoshop. So, I want to make it work.

    Hi judith,

    Please try the following steps: error "Licensing has stopped working". Mac OS

    Best regards
    Maurice

  • Mercury Playback Engine GPU acceleration is not available on this system

    When you use Adobe first Pro CS5 with a new system, I brought 5 days ago, I get the message not available on this system EMT.

    Windows 7 Pro 64-bit operating system

    Inte i7 Quad Core 2600 k 3.4 GHz 1155 CPU

    Intel DH67BL mATX mobo

    2x750GB Sata HD RAID 0

    16GB DDR3 1333 MHz

    Gigabtye Geforce GTX 570 OC 1280 GB PCIe

    750 Watt PSU

    According to the specs on the website of Adobe, this system should work with Adobe first Pro CS5 MPE.

    Is there something that I am missing?

    Have someone else had this problem before?

    I think that maybe the card is defective.

    The GTX 570 is not on the list of cards that first Pro CS5 will use for processing CUDA.

    The card is on the list of cards that first Pro CS5.5 will use for processing CUDA.

    See this page for a list of cards added to CS5.5.

Maybe you are looking for

  • Using the battery

    Have updated to iOS iOS 10.01 9.3.5. Now in settings, battery the use of the battery and standby is still visible because none even after charge complete

  • My iTunes store is all black with the exception of the photos in the album

    Hey there! I have problems to display the iTunes store. Currently, it looks like this when I open: Despite the usual suggested correction of resizing of the window and the screen resolution (my screen resolution is 1920 x 1080) by train, it remains t

  • Plant - journalist crash Firefox do not send report

    Hello I'm on the latest beta (33.0 Beta 3) and I have firefox crash a few times a day. That's fine, but when the journalist accident appears he tries to send the report to mozilla but fail most of the time. But note that is sometimes successful. I kn

  • Need to Win7 64 bit for Satellite A300D display driver

    Should which driver I use for my old A300D running on W7 64-bit? Can not find anywhere...https://drive.Google.com/file/d/0B9Ls81E7uVtLb1l2V09ENFZyOTQ/view?USP=sharingTHX!

  • Computer laptop webcam works for video messages but not viedo calls

    During calls video, video integrated webcam to my laptop does not charge not (black screen with a continuous spiral of loading). I can't see my video and the other person when you call can not see my video either. My laptop webcam has worked on video