KB973688 and KB954430 do not install. Windows Update loop on them. they install ever.
KB973688 and KB954430 do not install. Windows Update tries to install these two updates, but they never complete the installation. Tried to install KB954430 manually, but it would not install. Event Viewer event id 7023 windows module Installer service ended. Dialog box shows HRESULT:0x800736FD {7B30B69B-036c-b7e0-a06b-d6b9abf34537}. KB973688 would not install either. Tried rebooting, shutdown windows update, so I could install by hand. No updates will be installed. Help, please.
This question always took place or simply with KB973688 and KB954430?
Have you tried manually download and install updates?
Have you read the known issues with this security update of the section of KB954430 and try the steps recommended?
Suggest you download and Save KB954430 first . Since you did not specify if the system is 32 or 64 bit.
If you are not sure which architecture is the system, open System in Control Panel.
Look next to system type under law to see whose architecture is the system.
KB954430 for Windows 7
Windows 7 for 32-bit systems
Windows 7 for x 64 systems
Once the download is complete to read this and configure the system to boot .
Start in what is called a State of cleanliness will ensure that Sophos and printing software (including HP print software) does not interfere with the installation of the update.
Once you have started own the system, right-click the update registered and choose 'Run as administrator' .
Accept guests UAC to allow the update to install.
Reboot the system after installation.
Is he being always reaffirmed or just KB973688 be already now?
If KB973688 is the only be reaffirmed, install now while the system is still in the clean boot State.
That bring them both installed?
Cancel the clean boot procedure as set out in the KB article , they have or they do not have and please post back with your results.
MowGreen Services consumer safety update
Tags: Windows
Similar Questions
-
KB973688 and KB954430 do not install it.
KB973688 and KB954430 do not install it. They appear to install, but after turning off and restart they keep trying to install again. I use XP SP3. (This is my 1st time to enter in ANY forum) Help, please.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
KB973688 and KB954430 updates have tried to install for almost two weeks!
August 25, 2010. Dell Vostro 230 (bought in April 2010) running Windows 7 Professional. As part of the automatic update, my PC has attempted to install updates 'important' KB973688 and KB954430. Every night on the switch, the system continues to 'install' <1 of="" 2="">and <2 of="" 2="">sometimes for more than an hour (I've not waited to see what happens when it ends). Therefore, responses to "watching paint dry" next morning of clicks of mouse and messages 'not only respondents' on software (including IE). Trying to close takes forever and then goes into the problem installation of updates again! Today, I noticed since the update history page in the Panel that these two updates KB973688 and KB954430 had the 'Fail' status since August 13, 2010. It doesn't seem to be any advice on the Microsoft Web site. What can I do?
Phil,
For Microsoft XML Core Services 4.0 Service Pack 2 security updates may repeatedly appear in the update on Microsoft Update or Windows Update list
See http://support.microsoft.com/default.aspx/kb/941729/ for possible assistance.
If you cannot rename msxml4.dll in normal Windows mode, boot to Safe Mode, http://support.microsoft.com/kb/315222 and do it from there:
How to get help and support for this update954430 Microsoft XML Core Services KB
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
2>1> -
I installed KB973688 and KB954430 which are XML updates a few times. If I review my editing history, it is said that they have installed successfully, however, these two updates always keep appearing in my list of updates to install.
See http://support.microsoft.com/kb/976982 or http://support.microsoft.com/kb/976220 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64-based systems (KB954430) is not installed. Windows Update fails to install this update and error reports: 64 C code. The off button displays an alert and when you place the mouse over it it shows "installs the updates and then shuts your computer." When I press it it says is to install the update and my computer shuts down and when I restart it it shows it is update and configuration of the update but when loading Windows Vista, in windows update, it shows that updated security for Microsoft XML Core Services 4.0 Service Pack 2 for systems x 64 (KB954430) becomes available again. I tried to manually install the update by downloading, but when trying to install windows install indicates: "the feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder containing the installation package ' msxml.msi in the box below. »
MSXML 4.0 SP2 (KB954430) and MSXML 4.0 SP2 appear in Control Panel programs and features. When I click on them the only option is 'an install. When I try to UN install these the same message appears when you try to install this update manually: "the feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder containing the installation package ' msxml.msi in the box below. »
To try to solve this problem, I emptied historical Windows Update. I tried Windows Installer Cleanup to remove MSXML 4.0 SP2 (KB954430) and MSXML 4.0 SP2 so I can reinstall it but Windows Installer Cleanup crashes and displays a command prompt with a lot of text.
If Windows Update has found that you don't need, you don't have to worry about this. They probably have fixed an error in the update system.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
Hello
Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.
Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?
Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.
Please, any advice on this will be greatly appreciated.
Alan
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
You will receive the best help here.
See you soon.
Mick Murphy - Microsoft partner
-
Silverlight only updated [failed] and I cannot uninstall
I can not send attachments to the e-mail (msn, hotmail) and was told to reinstall silverlight, but I can't uninstall it, and I could not install the last update. Any suggestionsPlease repost your request in the Forum Microsoft Silverlight. Thank you! Carey Frisch
-
my wireless mouse and keyboard do not with windows xp after you install a new battery.
my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.
Hi nwecker,-What is the brand and model of your mouse and your keyboard?If the keyboard and mouse are Microsoft, here are some links that you can give a try on:Troubleshoot the incidents of the response to the mouse or wireless keyboard
Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use
-
I installed Microsoft Fix It on my computer (MSXP). The diagnosis and repair of the Windows files and problems would not install on my computer. He said the chain was not in the right format. Clues?
Hi Kathryn1713,
· You are not able to run the Microsoft Fixit tool?
If so, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.
-
I get this everytime I try to print from my design program (Splash): error in C:\windows\system32\spool\drivers\w32x86\3\LXCItime.dll missing entry: lack of entry: RunDLLEntry It just started and I have not installed anything new.
Hello Lscherr,
Thank you for your message. To clarify, you are able to print out your design program? You can try to perform a clean boot and printing of your design program. A clean boot will start your computer without any 3rd party applications, you can then start your design software and test the printing functionality. If you are able to print, the problem may be caused by another application of part 3. Click HERE for instructions to boot.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I get an error code 643, and it will not install updates due to these errors, why?
I get an error code 643, and it will not install updates due to these errors, why?
Hello
error code 643:
-
I can not uninstall Silverlight and therefor can not install update continue to receive messages to
I can not uninstall Silverlight and therefor can not install update continue to receive messages to do and it makes me nuts HELP!
See this: How to clean a facility damaged Silverlight and then reinstall Silverlight
-
whenever I try to download a program that I tells me that windows can't open this file and I can not install nething or what did I do or what I need to know
Hello- What you're trying to download?
- What program you try to open when this occurs?
- What happens when you try to install the program?
ReferThe link and follow the steps.Solve problems with programs that cannot be installed or uninstalled -
updates for microsoft vista KB2431831 and KB971029 will not install I get an error code 646
The Microsoft Vista download KB2431831 and KB971029 will not install, I tried manually install all I get is error code 646
the KB includes an automated fix this that solves the problem, look here: http://support.microsoft.com/kb/2258121>
Let me know if this helped.
-
Control SMART and short CIOS not installed? New notebook
Hello
My parents sent me the 4440 s of HP Probook. I turned it on and it was working fine. No problem at all, but the hard drive was very small. Only 59 concerts. So, I took the hard drive from my old laptop (which still works. 300 concerts) and put it in the new laptop. When I turned it on this pop up.
HP PC Hardware Diagnostics UEFI
-----------------------------------
Version 1.6.0.0 - BIOS
then it gives me the opportunity to perform a verification of memory, hard disk check, language and output. Memory passes test, but when I do the hard disk (quick audit and comprehensive check) check it says controls SMART and short CIOS not installed.
When I click on leave peripheral saus to boot not found, please install system of operating on hard drive.
Here is some of the best. I took the hard drive out and put the new hard drive and little return in the new probook, and the same message appears. I don't know why. I can't figure out what it could be. My father-in-law has a good knowledge of computers, but unfortunately, on the phone it cannot be a great help.
Someone save my new laptop beautiful!
The diagnostic program has done a small partition on the hard drive to it. When you have removed it, so that has UEFI. You need to reinstall as the only one available is the one stored in the BIOS.
Here's that and your BIOS update.
This is for Windows 8.1 as you say this is a brand new, that is my logical guess.
I hope this helps. I used the basic model for it, and it should work. If you have any problems, send the product so that we can check the cross. However, there should not be a problem.
JHS
Maybe you are looking for
-
World of Warcraft on Tecra M5 with Nvidia video problem
Hello I own a laptop very well supported - Toshiba Tecra M5 with the following specifications Processor: Intel Centrino Duo - T2600 @ 2.16 GHz and 2.16 GHzRAM: 4 GBVideo: Nvidia Quadro NVS 110MOS: Windows Vista Ultimate 32-bit (on the highest perform
-
trouble with hyperlinks, I did a right click and open to access all links
I can't access the links without right clicking and then clicking on 'open '. Is it a matter of adjustment?
-
HP G42-355TU: administrator password
I forgot my administrator password, the screen says SYSTEM DISABLE [67141896].
-
HP envy: 10 Qualcomm Atheros AR9485 Wireless Adapter Driver Update Windows
Hello I want to know where I can get drivers for my HP Envy Qualcomm Atheros AR9485 for Windows 10 I looked at the following site: https://www.Atheros.cz/Atheros-wireless-drivers.html And he showed that the drivers are not available for Windows 10, I
-
to can recover emails the en web?
perdii mi computadora y me borrarron put email y quiero recuperarlos in mi cuenta