KB981793 repeatedly installs on XP

Similar Questions

• WU repeatedly installs the same two updates. KB2686828 and KB2656839.

  I am repeatedly offered the same two updates that are installed automatically. When I try to install any other optional updates, they are downloaded but do not install. When I check the update history, there is no failure message or any indication the downloaded updates tried to install. I tried to install in the clean boot state that didn't work and I tried to fork to install. The two who installed do not add and remove programs. I also tried the update fix - it who said that had changed the location data. Is there anything else I can do? Thank you.

  Hi Kathleen,.

  Did you change your computer before this problem?

  This problem occurs when one of the following conditions is true:

  (a) an error has occurred during installation. The update has not been installed.

  (b) the update has been installed. However, a file was not updated to restart the computer.

  You can follow this link & check if the isuse persists:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  
  Reference: How to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues?

  Hope the helps of information.

• Repeated installation of update KB63380

  Update of Microsoft KB63380 "installed successfully" 4 times today on my Windows XP Home Edition.  Now, I get the message that this particular update is ready for my computer.  Probably 4 times is more than enough?  How can I get rid of the message repeat? Windows XP	Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)		Friday 17 February 2012	Automatic updates
  Windows XP	Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)		Friday 17 February 2012	Automatic updates
  Windows XP	Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)		Friday 17 February 2012	Automatic updates
  Windows XP	Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)		Friday 17 February 2012	Automatic updates

  Hi Idudiclaire,

  Here are the compliments from PA Bear - MVP:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying experience problems of installation of the security updates Microsoft may also visit the CSS homepage for assistance: https://consumersecuritysupport.Microsoft.com/

  I hope this helps.

  Good luck!

• Repeated installation of the same updates.

  Whenever I have shut down my computer it says: it is installing 7 updates.  Surely it is not 7 news updated every time.  What is going on?

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

  Could be of assistance if you we said what Windows operating system you use etc.

  TaurArian [MVP] 2005-2011 - Update Services

• Repeat Installations of Service Pack 1

  I was prompted to upgrade to service pack 1 several times in recent months. I update and it shows with success. Why after a few weeks he still says once the update is necessary?

  I was prompted to upgrade to service pack 1 several times in recent months. I update and it shows with success. Why after a few weeks he still says once the update is necessary?

  Are you sure it's Windows Vista SP1 and not SP1 for something else?
   
  If so, why SP1?  Windows Vista (long) should have been updated to SP2.  You might have some infections/infestations galore.
   
  Check you installation and report it back in this conversation.

• Repeated installation of Windows Vista SP1 in Windows Update and fake notification of successful Installation.

  I was using Windows Vista Home Basic 32 bit OS in my Dell Inspiron 1501. The operating system is preinstalled and Windows Update updated to SP2. But recently an unknown problem has occurred and my laptop cannot connect to the internet. As no reason was found, experts have advised the reinstallation of Windows Vista. I reinstalled Vista by running the operating system provided by Dell with my laptop DVD. The laptop started to connect to the internet normally.

  I started to receive an update to Windows Vista SP1. I installed it. Installation has suddenly didn't have that about five minutes and the computer also has not restarted several times on its own as expected. At the end of the Windows Update notification "Update" successful installation Update history shows also succeed installing SP1. However, I am receiving the same updated daily and installed in exactly in the same way with the same result. After installation, the Windows version does not display Windows Vista Home Basic SP1 but only Windows Vista Home Basic. What should I do?

  I had the same problem and it really irritated me. Even when you install SP1, and he says there are successful (takes like 1 sec inst) and you click on updates search is there once again. He said in the story who is has been installed, but is not there, when I tried to install SP2 maually it is said first install SP1, and then I tried to manually install SP1 and it says that I have already. But if you go to start > right click on 'computer' > properties it does not say you have SP1. So here's what I just did and now it worked and SP2 as well.

  When you click on the support link that he gave u get the ability to run a thing 'fixit '. That run. And it still didn't work. (read everything in the support page) Then I went on this link and ran the virus Hunter MS. Nothing was found, problem still there. so I ran again the file 'fixit '. (twice he said them that something was fixed.) then I restart my computer and tried to install the SP1 Setup again and it worked perfectly :) then SP2 and it worked as well manually. and he has actally took like an hour to install. maybe try, worked for me. lol, don't know what measures was unnecessary, but it worked. You can download the SP to install it manually, simply google "manually install SP1/2 for vista" or something and download it.
  Sorry for the bad grammar/spelling. In a hurry, lol. I hope that you manage!
  (if the link does not IE - http://www.microsoft.com/security/scanner/ )

• Repeated installation of updates of windows

  I have Windows 7, waiting for the 10 upgrade.  Recently, in the last 3 weeks, every time that I stop, the system wants to install 2 updates.  I assumed it was the same 2 updated, and so I ran subsequently a Security Essentials Full Scan, which took more than 2 hours and reported no problems.  This seemed to work, for an open and closed.  However, the problem reappeared and is always repeated.

  Someone at - it any other suggestions on what I could do.  I hope that the upgrade to Windows 10 will eliminate this problem, but am concerned a breach of security.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Repeated installation freeze (with screenshots) - suggestions?

  I have a problem with the installation of Flash.  Running Windows 7 64 bit on a Lenovo T410.  Antique Junker, but do well other than this Flash issue.  The built-in flash of Chrome is fully operational.  There is facility for Firefox 34.0.5 (the most recent, although the problem started with an earlier version and is ongoing), that I prefer.

  I have download the appropriate and most recent Version:

  

  It downloads, click on run and approve the administrator right to change.

  

  Nothing new here.  The question is this:

  Install Flash opens with a white screen:

  

  It will remain empty for hours.  She will not, close although the reduction of the toolbar is functional.  It is the only way to stop the process in Task Manager.  This results in a warning of end-process confirmation.

  

  The Setup program, then immediately closes and I'm at square one.  I tried to install dozens of times.  I uninstalled Firefox, downloaded through Chrome or IE, etc..  No luck.  It blocks every time.  This blank screen gel has been ongoing for months... every two weeks I get annoyed by Chrome and go back and try to understand the issue.  I ran the full uninstall earlier versions, several times.  I rebooted after uninstalling, run the download, etc dozens of times.

  The only quirk I see if the install download has always "32" in the title and it's a 64 bit OS.  But I don't know enough of the difference whether what counts, and it's recommended by Adobe for the operating system and the browser download.

  Any help is appreciated.  If you would like more information, I am happy to provide (if if it's something complex, please provide a step by step).

  Thank you!

  Hello

  Sorry, you have problems to install Flash Player, but thank you for the detailed explanation of what happens and what you've tried.  The help pages outlines common troubleshooting steps for the installation of Flash Player.  I suspect that you have tried most of them, but if you are unable to install using the installation online programs (that you are currently using) we also provide 'stand alone' versions of our installers to the bottom of the page.  These stand alone installation programs will most likely solve this problem for you.

  Windows - http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html

  Mac - http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  Thank you

  Chris

• kb915597 repeated installation and not some other updates can get on

  This update kb915597 has infected once more my laptop. No other updates are given. I've checked all my updates and nothing. It's not even appear on my update history. last time this happened, I had to bring my laptop to original factory setting. What can be done to stop this.

  Hi Mryhgl,

  This is normal. Windows Defender often appear in Windows Update. It is constantly being updated with information about the latest spyware and other threats facing windows that are discovered on a basis continues.

  All the updates of Windows Defender will have the same number (KB915597).

  See this article for more information.
  Description of the Windows Defender definition updates

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Microsoft - KB2572073, KB2633880 and KB2518864 security updates offered repeatedly to install

  Several times today (at least 7) my system asked that I install Microsoft Update for my computer (KB2572073, KB2633880 and KB2518864).  I get no error message on the installation.  But every time it's the same three updates.  Any suggestions what mich was happening and how can I fix?  Thank you

  This is a bug of Windows Updates.

  See the ahaap post in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/repeated-installation-of-update-kb63380/8b0e14ce-43dc-45b7-948d-3758054a1784 I followed his suggestion and all is good...

  Kind regards...

• KB979683 WU installs OK but keeps offering him yet again and again

  This security update has just been published as well as several other right guard appearing as an update to treat even if it appears in the installed list. What is happening and how it stop?

  Running XP Pro SP3 . In Add Remove panel only found an instance of KB9799683, which I deleted. When Windows update restarted the KB979683 arose and I allowed him to be installed. And now whenever I reboot the system, he tells me there are updates installed and of course, there are KB979683 there is only one.  When I check the list of installed patches that KB979683 is there and will be added on every time I run the update. I don't want to hide it for now until this problem is solved

  I followed your steps after the posting of the updated and once it appears in the status bar (update available for treatment) I went through the process of importing certificate. It showed as having successfully completed. Then, I closed the open panels and restarted the computer. Still, the update appears in the lower right task bar and indicates that there are updates. I had a quick glance and it is always eager to update KB979683. I have bot 3 other PC with the same question. Humbug! It is not a question - simply boring.

  One of these workarounds going to get KB979863 installed correctly:

  Solution #1 - using Windows Explorer, navigate to the directory WINDOWS (C:\WINDOWS). Open the KB979863.log and see if there is a section that shows the following entries:

  69.340: c:\windows\system32\ntoskrnl.exe is in the list of oem
  drivers... jump copy!
  80.656: c:\windows\system32\ntkrnlpa.exe is in the list of oem
  drivers... jump copy!

  IF the KB979863.log contains these entries that the solution #1
  

  1) IF KB979863 is listed in Add/Remove programs in the Control Panel, and then uninstall it and reboot the system.
  2) manually download the update from the Microsoft Download Center and Save it.
  Recommend it saved directly on the root drive (the drive where Windows is installed on, usually C:\):

  Update for Windows XP (KB979683) 32-bit security

  (3) once the download is complete close all open programs and browsers
  (4) KB979863 install by clicking Start > run > Browse
  Click on the my computer icon in the left frame
  Click the drive root in the right frame (in this case it is C:\ ), click on the Open button

  Click once on WindowsXP-KB979863- x 86 - ENU.exe to highlight, click Open
  Add the /o switch to overwrite the OEM inf files

  C:\WindowsXP-KB971486-x86-enu.exe/o/o

  Note that there is a space between e and the /

  Then click OK and the update will be installed.
  When it has finished installing it takes a restart prompt.
  Make and update will not be offered repeatedly.

  Note: Workaround above for installing the kernel updates provided by MVP Ottmar Freudenberger

  Solution #2

  The second workaround is not related to the question of OEM .inf file above. Concerning the number of unsigned system files . To find out if the question repeated installation undergoes a unsigned system files, follow these steps:

  Click Start , click run , type sigverif.exe and then click OK .
  Click on Advanced
  Click on "Notify me if any system files are not signed"
  Click the connection tab, check the box Save results file in a log file signature verification is enabled
  Under options , the name of the log file should show as SIGVERIF. TXT . In this case, click OK
  If this isn't the case, type SIGVERIF. TXT and make a mark next to add it to the log file existing
  Click Start

  Be patient as the tool will take some time to run.
  When the tool has finished its operation click the button Advanced to again File Signature verification tool.
  Click the recording tab.
  Click the view log button. SIGVERIF. TXT is now open.

  An XP system that is the problem of unsigned files will show an entry that looks like this to the top of a SigVerif.txt-

  Operating system platform: Windows 2000 (x 86) Version: 5.1, Build: 2600, CSDVersion: Service Pack 3
  Results of the analysis: Total of files: 3718, signed: 70, unsigned: 2573, not scanned: 1075

  This is not affected by unsigned files will show a system - XP

  Operating system platform: Windows 2000 (x 86) Version: 5.1, Build: 2600, CSDVersion: Service Pack 3
  Results of the analysis: Total of files: 3578, signed: 2535, unsigned: 0, not analyses: 1043

  If the problem is related to unsigned files, the solution is:

  (1) connect you with an account with administrator privileges. If your user account has administrator privileges, log with this account.
  NOTE: XP Home Edition has no administrator account showing on connect, unless the system is started in Mode safe.
  If your user account has administrative privileges of it does not need to start safe mode and log in as Admin
  
  (2) open an command prompt (click Start > run > type cmd and click OK )
  (3) at the command prompt, type the following commands, pressing enter after each command
  You can copy & paste the commands after the speedy right clicking after > and choose Paste

  net stop cryptsvc
  Ren %systemroot%\system32\catroot2 oldcatroot2
  net start cryptsvc
  output

  4) go to this subfolder - WINDOWS\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
  (5) remove all tmp*.cat files in the subfolder. If any of the files that start by tmp exist in this folder, do not remove any other files . The .cat files
  This file is necessary for the installation of patches and service packs.

  Do not rename the folder C:\windows\system32\catroot . The Catroot2 folder is automatically recreated by Windows, but the folder C:\windows\system32\catroot is not re-created if is renamed the folder C:\windows\system32\catroot .

  Download manually KB979863 and Save it. Do NOT install the downloaded version of it:

  Update for Windows XP (KB979683) 32-bit security

  Once the download is complete, close all the open programs and browsers and then install KB979863. Restart the system, at the request and that there should be no new proposals of the update.
  MowGreen Services update - consumer safety

• Sony Mediago installation problems

  I recently bought a Sony Walkman.  Downloaded the Walkman guide successfully since the walkman via USB connection.  But had problems with Media go. I called the hotline and gave the link to download from the internet.  I managed to download, but not install.  The Green install bar fills almost immediately (while it is generally quite progressive - in line with the speed of installation).  And as he goes.  I tried several times and come back later quite awhile to my laptop and the situation does not change.  The taskbar is always 'unpacking '!  If I try and cancel, I can't - the 'installation' process is frozen.  The only way out is to close my computer, which takes more time than usual "installation" something is slowing the process.  I'm not IT savvy, know although a bit. I have run scans and don't seem to have any virus etc. Can someone help?  My OS is Windows XP, SP2.

  I googled how to check for errors in Event Viewer.  I got to the event viewer, but as I said, I'm not IT savvy and don't know how to interpret the data.

  I know how to do the little control panel and don't see listed mediago.

  I already have the link that you gave me.

  No doubt I should be able to download a program of good reputation without disabling the AV etc?  I'm afraid to do something stupid!

  The last suggestion - I don't know how to do.  First, it is said to add the installation of applications on desktop - where I would find it.

  I checked with Sony and the walkman is compatible with Windows vista.  The packaging says Vista SP1, even if I have SP2.  This would necessarily make a difference in low load capacity...

  I am grateful for your advice, but it might be better to stop there?  I think I need more IT experience to benefit from your help!.

  Sorry,

  This shows how to use Event Viewer

  http://www.bleepingcomputer.com/forums/topic40108.html

  When you open the event viewer

  Click on the > next to Windows logs

  Click on the > next to the Application log

  In the lower center pane, you will see a general tab and a Details tab

  Error will result in a message in the lower window as well as

  The journal name

  Source

  Event ID

  Event log online help link

  You must select the error that coincided with the approximate time that you are trying to install Mediago.  Click on the details tab which can have Mediago listed in the details of the error.

  Repeat installation Mediago, then open the event viewer if the installation fails.  Error should show immediately in Application or log files

  Sometimes the AV software and firewalls interfere with download / install.  Deactivation will be during the time it takes to install the application.  If you save it on the desktop, your software can have a scan option in your right click menu.

  Right click on the file that you saved and select ' scan this file. "

  It will determine if the file is safe

  When you click Download, you should be able to select Save as

  A window will open and you can Browse and select Office to save the download to

  See the illustration

  http://www.cod.edu/people/faculty/grantm/dsktopsave.htm

  The file will be there until you double-click it to execute an installation process

  Service Packs should not question

• Not enough space within the CC Installer error.

  Hello

  (1) purchased annual presentation of creative cloud

  (2) downloaded, installed the creative cloud

  (3) failed to install Acrobat Pro XI, it shows that there is not enough space

  (4) installation directory modified in the settings

  (5) I tried "repeat."

  (6) shows the same error

  (7) exit the program Creative Cloud

  8) launched again with admin rights, tempted to "repeat" installation

  (9) problem remains.

  Live Adobe support is not an answer.

  Phone support is 39 USD / incident (nice!).

  Thanks in advance for your help.

  Alex.

  Receipt of answer, but what they could help to was:

  (1) it is recommended to install all the Adobe products on the C drive (where the operating system is installed)

  According to your questions:

  (1) on my RAM disk only 270 MB of free space (I have 6 drives well and lots of space on others)

  (2) change the installation with the settings menu directory did not help a

  Solution:

  As I used the symbolic links to install Adobe Reader on RAM disk (if not impossible) to push (900% +) my daily productivity, I have to

  (A) uninstall all adobe products

  (B) remove all symbolic links to these

  (C) Manage fresh install again.

  Thanks for trying to help.

  Alex.

• Problem with the installation of photoshop - please help!

  Hello, as the employee of the wonderful adobe, instead of helping me solve my problem told me to search for the answer adobe help topics (I can NEVER find the answer, I need on any page of sites help topic, that's why I always prefer to just directly contact them) or try the forums (essentially giving access to his work to you guys) I'm here.

  I'm trying to donload my copy of photoshop elements 3 on my laptop. I downloaded it and works on my desktop and it's on my laptop before I needed to get a new hard drive. The problem is, whenever I try to open the program after installation, I get this message:

  "Could not complete your request because of missing or no personalization information valid"

  then the program closes.

  I have alread deleted and reinstalled the program several times, but no luck.

  Any ideas on what the issue is, and how I can fix this problem?

  I use Mac Os X, fyi

  PS I just downloaded on my sister's laptop, that's why I'm trying to work on mine even once, I thought that it would be finally...

  The only reference I found to this error are intended for Windows users, but it seems to point to an authorization number.  I recommend creating a new administrator account and repeat installation under this account.  It seems as if the installation program cannot write the serial number during installation information.  A new administrator account resets permissions so should not encounter the same problem as your current user account.

• Problem with storage of the profiles moved in field with the version 20.0

  Hello. Used an online translator. At the office of a local network with the domain name. All user profiles are stored by politicians in the field in the network folders on the server using equipment "the folder redirection. With the Firefox update to version 20, it stopped working. Pages that have been stored in bookmarks do not open pages only, open new, generally nothing happens as if the buttons in the page transition actions are inadequate, all search engines have disappeared. The complete elimination of the program and repeated installation does not solve a problem with a profile. Help, only the creation of a section local profile, but it is not a solution.

  Sorry,
  This is a known problem due to the use of UNC paths does not correctly supported by Firefox 20

  There will be a special ("Chemspill") version of Firefox. It will be Firefox 20.0.1 and will probably be released Wednesday, April 10.

  If you are unable to wait for to install Firefox ESR 17.

  Firefox17 ESR is affected by this problem and intended specifically for business / corporate, up-to-date and secure.

  • Information and download links
    http://www.Mozilla.org/en-us/Firefox/organizations/
    http://www.Mozilla.org/en-us/Firefox/organizations/all.html

  This is a related thread and it contains a suggested workaround solution /questions/955232 #answer - 424739 while continuing to use Firefox 20.0.0

  It's a shame these undertakings do not use ESR apparently do not test the pre-release versions in their IT departments. At least by two Aurora and Beta

  1. Evening http://nightly.mozilla.org/
  2. Aurora, http://www.mozilla.org/en-US/firefox/all-aurora.html
  3. Beta http://www.mozilla.org/en-US/firefox/beta/