Keep coming back to the home screen

Similar Questions

• I can't run in windows xp screen goes to normal boot options and mode safe but keeps coming back to the same screen

  I can't get windows xp to run - I set a restore point - rebooted - ann that he goes to the economy/regular mode promp but when I try to open windows it just brings back me to the same screen.  Tried to run the system restore but disc is not xrecognize it. Help!

  Thank you Gary

  Do not follow exactly...

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• What button am I pressing that tempt me to bounce back to the home screen?

  When you type in the landscape, or horizontal, on my iPhone 6s, I am often bounced back to the home screen or the lock. I'm sure I'm pressing something because of what it is most common when I'm in hurry or using a lot of pressure by grabbing the phone. What button am pressing it causes?

  The Home button.

• Updates to Windows during the stoppage has not taken effect and the same updates (16 of them) keep coming back in the next restart.

  Original title: Windows updates has not taken effect.

  My Windows updates during the shutdown did not effect. The same updates (16 of them) keep coming back in the next restart.

  I tried fixed it 50461 mentioned in one post, but the problem persists.

  Any help to appreciate.

  Hi Lee CC,.

  1 windows operating system you are using?

  2. you receive an error code or error messages?

  3. Why have you tried the Fixit 50461? Have you received a 646 error?

  This problem can occur if updates failed to install.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can also read the following article and check if it helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer keeps going back to the logon screen after a few minutes

  My computer keeps going back to the logon screen after a few minutes

  Hey Missy,

  In addition, you can go through this post.

  The main reasons for this problem is a corruption in the registry key that contains the value of the files that are executed during the connection to windows. This registry key can get is replaced by an incorrect value, or it might get corrupted due to a virus / trojan activity.

  See if you can solve this problem by running SFC (System File Checker) scan in safe mode.

  Step 1: Start the computer in safe mode

  Using safe mode, see: start your computer in safe mode

  Step 2: Scan SFC

  This analysis relationto with system files integrity problems and trying to fix the same. If the scan does not automatically, you can try to repair these files manually. Detailed information is available here:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• When viewing photos freezes and goes back to the home screen.

  When viewing photos and videos on windows 8 it sometimes stops as your scroll and dates back to the home screen

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps suggested by DRASTOKLOP from the link mentioned below if you have Kaspersky installed on the computer and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-photos-app-calendar-messaging-and/ef672ca8-8e92-418f-AA60-155bd94d0942?msgId=6f3aa7c2-FEFF-4FDD-a9b0-5d10ea4e604b

  Answer please if you have any questions.

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• Whenever I search screen safari goes back to the home screen

  When you try to search the web in the safari bar, the display returns to the home screen

  Hi Smk63bmw,

  I understand that you experience a problem when you try to search with Safari. I suggest that you try the procedure described in the following article to help you solve this problem:

  If Safari doesn't load the pages of several sites

  In OS X Yosemite, you can delete data from the Web site for the last hour, or these days if sites or pages recently stopped loading.

  1. Click history > clear history and data from the Web site.
  2. In the sheet that appears, select the range of data that you want to remove from the Clear pop-up menu.
  3. Click on clear history.
     

  If you want to remove the data from the Web site for all the sites and pages you have never visited, choose 'all history' in the light of the context menu. The option to delete all the data of the website in the privacy of the Safari preferences pane does this, too. These options also reset your browsing history and Best Sites.

  If Safari does not load a page or a page Web elements are missing - Apple Support

  https://support.Apple.com/en-us/HT204098

  Thank you for using communities Support from Apple!

• T520 keeps restarting before reaching the home screen of the BIOS

  Hello

  has obtained a T520 here (nVidia GPU) that reboots constantly and never reaches the home screen of the BIOS:

  -power LED button turns green

  -fan turns and optical drive is accessible

  -fan, the LED shuts off

  -pause of about a second and the whole sequence starts again

  This happens with the power supply and a battery. HARD drive is deleted.

  I already seconded the optical drive and the BIOS battery.

  Any other ideas? Would it be the result of a BIOS update failed? Or a few screws - up variables UEFI?

  Is there a procedure for recovery of crisis for the T520 update the BIOS for the boot block?

  Kind regards

  jal2

  I have reflashed the BIOS area in the SPI flash (offset 0 x 500000, length 0 x 300000) and the error disappeared!

  BIOS version is 1.42, the source for the binary file was the. FL1 updated Win7 Lenovo BIOS file (same offset as shown above).

  The only problem was that the SPI flash came with WSON package, so I could not use the clip Ponoma and had to solder wires.

  See you soon,.

  jal2

• Minimize the app, or go back to the home screen?

  Hello

  I was wondering if there is a way to minimize the app, return to the last open application or return to the home screen?

  Thank you!

  For example, you can use

  #include 
  ...
  Application::instance()->minimize();
  

• Windows reduced on dual #2 keep going back to the main screen when the system is locked

  I have two monitors and just got a new system with Windows 8 is installed.  I have a monitor set up as Monitor 2 (just as I did before windows 8) so that nobody walks by can see it... I have confidential information open on that screen quite often - otherwise, it is reduced.  My main screen is set up for the bulk of the work that I do.

  However, whenever my system is locked or falls asleep, the apps/information, I put up on the screen 2, flies back to the main screen when I unlock the system.  I never had this problem before.  I tried to maximize the apps/info to fill the screen, but it does not work: it continues to move... it means that whenever I have unlock my system, confidential information appears on the screen which can be seen by anyone who was travelling.

  How can I stop this from happening?

  Hi Kelleybennett,

  Thanks for posting the request in Microsoft Community Forums.

  It seems that even if the computer is configured in the standby mode, the second monitor stops and windows are going to another. This could be a problem with the video card drivers or pilots of the monitor. Video drivers could be arrested to answer when the computer is set to sleep.

  You can try to uninstall and reinstall the drivers for the monitor and video card drivers and check.

  a. press the Windows key + R

  b. type devmgmt.msc and press ENTER to launch the Device Manager

  c. in the search for Device Manager for the device, click with the right button on the monitor drivers and select the Uninstalloption.

  d. also uninstall video card drivers

  e. restart the computer and check.

  See also:

  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this information helps. Response with status so that we can help you.

• cancelled downloads keep coming back after the restart

  Hello guys. After the Update beta, beta 9 if I remember well (on the section of the said browser ver 32) downloads are badly behave. the first problem I have encountered is when I downloaded a (approximately 40 KB) zip file, the zip is downloaded on the pc I could open it year everything was ok, but in firefox download, he showed that the download. I tried both download and open the zip option. After that I tried to download something else and everything was ok. the real problem is when I try to delete the download or cancel nothing happens. I restarted the browser and downloads are still suspended. How can I solve this problem?

  Note that the source code of Firefox shows that this has been done deliberately.

  • http://MXR.Mozilla.org/Mozilla-beta/source/browser/app/profile/Firefox.js

  972 // Turn off remote lookups in beta and stable channel.
  973 #ifndef RELEASE_BUILD
  974 pref("browser.safebrowsing.appRepURL", "https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%");
  975 #endif

• I am unable to connect to my Comcast email account. When I do it, it keeps coming back to the login page. As it is in a loop of some sort.

  Comcast has made changes to their e-mail for several months. The e-mail function has been affected, but the problems are different for different browsers. I've had problems since August. In any case, this morning, I was unable to even log on messaging via Firefox, but I could access it via IE.

  If you are interested, here is what I posted on their forum of 'internet' this morning:

  http://forums.Comcast.com/T5/E-mail-and-Xfinity-connect-help/E-mail-and-Firefox/TD-p/1963071

  As of 17:51 12/21/2013 than Comcast support thread seems to be resolved by turning off the recent history in Firefox.

  I'm this as resolved marker.

• vCAC 6.0: keep coming back after the reboot of the file/etc/hosts

  HI guys,.

  I am running vCAC 6.0, I noticed that on my identity server's host name is not COMPLETE and I also noticed that I have big fingers DNS server settings.  I can fix this in the user interface and I confirmed that the/etc/hosts and /etc/resolv.conf have been updated correctly.

  However, if I reboot the server all restores the original files.  Same thing if I modify the file manually with VI.

  I saw exactly the same thing with vCOPs.

  Any ideas?

  Ben

  I am not sure what is causing the reversion.  Reinstall the identity a vCAC using the FQDN and things got appropriate DNS works...

  Ben