Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

Similar Questions

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• I get this error message when you try to open Word. "This action is only valid for products that are currently installed" ERROR (code: 1605?)

  I get the above error message everytime I try to open microsoft word, excel etc. and it also appears when I try to open Itunes/Quicktime. I tried opening other programs and they work all (acrobat, Media Player etc.)

  • Recent changes made to your computer - I was getting the error message displayed by this link here: http://discussions.apple.com/thread.jspa?threadID=948432&start=15&tstart=0 I made the changes suggested by Ebody and it didn't work so I changed it back.
  • What you have already tried to fix the problem - I downloaded the service pack 2 for office see if that would eradicate the problem, but he says that there are no products affected by this package installed on this system.
  So I'm at a lost to know what to do and I have work I need to access! any help would be greatly appreciated!

  Hi Steve,.

  Thanks for the reply again, I just did a Tassel factory by pressing F8 at startup upward and then through the options and make Factory Image Restore (after saving the contents of the hard drive to external hard drive) which took about 5-8 minutes after the return and then re-installed all my programs etc. , and everything works fine!

  So I say this to all who have the same problem and no other method does work, simple - easy - fast!

• Muse of error message when you try to connect / publish to Business Catalyst

  This morning I have problems when you try to publish sites British Colombia through Muse.

  Someone else?

  

  Are you facing this error whenever you publish? Is this related to a specific file or is happening with all the sites that you are trying to update or publish?

  Please create a website and publish it as a trial, after having managed to publish, open the actual file muse and then proceed to publish.

  Thank you

  Sanjit

• (ox 80070424) error message when you try to connect to windows update view

  so I can't connect to the view to get the new directx driver.  I need cause I lost all sound on my computer

  Hello

  · What service pack is installed on the computer?

  · What is the version of directX installed?

  Try the following steps:

  Step 1:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  Step 2:

  Follow the steps from the link below: no sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• C:Windows/system32/rundll32.exe - Application not found - OK__I get this error message when you try to open a program

  Error messages occur now - seem to appear now, after I did a Defrag.  If I try to open AOL, it brings me to a display list who wants to choose from a list of programs.  For AOL, I click on AOL.  I didn't used to have to select from a list of display.  Then I tried to open an Astrology program and it took me to the same list, which of course is not.  Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK

  Here's a Plan:

  Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System

  Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.

  After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected

  Open the system restore and undo restore

  After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32

  and the problem solved

  Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact

• Error message when you try to connect to Vista

  When I type my password in the login screen of Vista during startup, I get the following error message:

  "The instruction at 0xff229000 referenced memory at 0 x 00000065. The memory could not write. »

  I click on OK, then I'm back at the password prompt. This is repeated as many times I try to open a session. Any thoughts on how to solve this problem?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox 15.0.1 gives an error message when you try to connect to my account @u.boisestate.edu

  I am a student at Boise State. When I try to access my broncomail account, or when I try to access broncomail mailed to Firefox, I get the following message is displayed.

  The page is not redirecting properly

           Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
   This problem can sometimes be caused by disabling or refusing to accept
     cookies.
  

  Cookies are not disabled, and I have not had this problem with earlier versions of Firefox.

  The other thing I notice is that the little green circle on the tabs for Blackboard BroncoWeb often seem to never ceases to turn.

  Firefox reload usually does not help that much because most of the problems are caused by settings and customizations. Before you try this, you might want to try Firefox reset. More info in this article: Firefox Refresh - reset the settings and Add-ons.

  I should have checked that before... when I click on connect to Broncomail, I find myself at Google. Is Broncomail actually a customized version of Gmail? I think one or two people say this problem on Gmail every week.

  The typical cause is probably crossed to cookies, so if you a not already clear your cookies from Google.com , please try this.

  About performance issues, try disabling use Firefox of accelerated graphics hardware. You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

• Object moved here - error message when you try to connect to the live account.

  I have Vista Home premium. When I try to log in my account online, I get a message saying: "Object moved to here" and I do not get the sign in page. The error message appears for two seconds and disappears. Then the screen become white. I contacted the phone support and they suggested the higher post my question here. Any suggestions? Thank you in advance.

  Hello

  The question you have posted is related to Windows Live and would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• "Gteko Brkr Svcs application has stopped working" error message when you try to connect to the computer

  When I connect I get this error "Gteko Brkr Svcs application has stopped working" my screen will become gray before all load.

  I can't find anything online about this.  Can someone help me?  Thank you!

  Hello

  1 did you changes to the software to the computer before the show?

  Start the computer in safe mode and check if the problem persists or not, if the question does not persist then perform the clean boot and check whether the problem is resolved or not.

  Was: start the computer in safe mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in SafeMode (Windows 7)

  B: Perform the clean boot and check if the problem is resolved or not.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• Having 2 error message when you try to connect to in__1. Unable to connect to a windows service__2. Location is not available

  System: Windows Vista Ultimate Edition

  Whenever I try to open the computer, I get two error message.

  1. impossible to connect to the service awindoes: Windows could not connect to the user profile service.  This problem prevents limited users to logon to the system.  As long as administrator, you can go through the system event log to see why the service did not respond.

  2 C:\\Windows\system32\config\systemprofile\Desktop makes reference to a location that is unavailable.  It could be on a hard drive on this computer or on a network.  Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again.  If it can't be located, the information may have been moved to a different location.

  Please help, I have of these massege error for some time.

  Try the system restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Try to connect as a different user if the symptoms were not your user profile is damaged.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope I could help

• Error message when you try to connect a K8200 3D program to a K8200 3D printer.

  Site of the Lim has been no help.  Manage the msg of error complains of "no com4/com/port". "No serial port not defined" or words to that effect.  The program has connected previously but had other issues.

  Any suggestion would be appreciated.

  Edokus

  This seems to be a problem with the software that you use with your printer and not a Windows problem.

  Unfortunately, neither the manufacturer of the printer, Velleman, nor the manufacturer of software, Repetier, seems to have good management.  They both rely mainly on forums that are not particularly active.

  K8200 forums: http://forum.velleman.eu/viewforum.php?f=45

  Repetier forum: http://forum.repetier.com/categories/repetier-host

  RepRap forum: http://forums.reprap.org/list.php?267

  As near as I can make, your error message refers to a problem with the connection between your computer and the printer.  As explained in the online manual for the K8200, when you install the driver required a "USB serial port" named COMxx must have been created.  See http://www.k8200.eu/manual/printing/?c=002

  The next step is to install the Repetier-host software.  Interestingly, K8200 online manual says to install the version 0.84 of the software because it is good enough, and "we are working on compatibility of newer versions."  Unfortunately, this old version is no longer available directly from Repetier.  The current version is 1.6.2 and earlier versions 1.5.6 1.0.6 and 0.95F are available.  A post on the K8200 forum suggests that 0.95F works and provides a link from the k8200 site (the same link is on the main page of downloads K8200 (http://www.k8200.eu/support/downloads/).  See http://forum.velleman.eu/viewtopic.php?f=50&t=17955

  Assuming you have version 0.84 or 0.95F of the Repetier-Host is installed, you should start, go to "Printer settings" and Configure the software to use the "USB serial port" with the number created by installing driver.

  Screenshots which describes the process above are to the K8200 man page link above.

  If you've done all this correctly and still having the problem, I suggest you search/post on the K8200 forum: http://forum.velleman.eu/viewforum.php?f=49

• We're sorry, but something wrong Mozilla Firefox 500 error message when you try to connect to the intuit community

  I have been going back and back, questions and answers about the Intuit community without any problem. Now, since Friday night, I not was able to get back in. I get the error message 500 of Mozilla. I use Windows 7 and I have Firefox installed 19.0.2. Everything was fine until Friday night. I don't know what has changed.

  The problem occurs only after you open the page, click Sign In, fill out the form, then click the Sign In button blue?

  http://community.Intuit.com/

  Does make a difference if you use a secure connection?

  https://community.Intuit.com/