Keep is disconnected after 1 minute (error 26)

Similar Questions

• computer a disconnect: my computer keeps a disconnect after 5 minutes how to disable this option?

  my computer keeps a disconnect after 5 minutes how to disable this option?

  my computer keeps a disconnect after 5 minutes how to disable this option?

  Check your power options. It can be assigned to turn it off after 5 min. of idle.

  Start button > Contol Panel > Classic view > Power Options > locate the plan that you use currently, click on change Plan settings > (the rest should be self-explanatory).
  After the back if you have questions about power options.

  t-4-2

• Vista keeps freezing on after 20 minutes

  Vista keeps freezing on after 20 minutes, or after the use of the internet, firefox or google chrome. What are some of the best tools to prevent this?

  Hi infliktuss,

  (1) since when are you facing this problem?

  (2) you get an error message?

  There could be several causes for this problem and there is no native tools for this problem however, you can follow the steps mentioned below to fix this problem:

  Method 1: Disable the security software and check to see if the problem persists; Follow the steps mentioned in the link below

  Disable antivirus software

  Important: Activate security software once everything is done.

  Method 2: Run the fixit available in the links below and check if that makes a difference

  Solve Internet Explorer add-on problems when IE hangs or freezes

   

  Difficulty of Windows system performance slow computer problems

  Method 3: The computer in the boot and a test to see if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Method 4: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows home server disconnects after 5 minutes

  Windows Home Server disconnects after 5 minutes and there is no way to get there otherwise than to restart the device. Any thoughts?

  Hello

  1 - is the home server that is unplug or is it the client?

  2. what happens when you do an ipconfig / renew? Which will renew the connection?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Method 1: Try to perform the boot minimum troubleshooting to find the root cause of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Make sure that return you the computer to a normal startup mode once it's done.

  I hope this helps. Let us know the result.

• Qosmio x 500-10T: WLan disconnects after 15 minutes with a DNS server

  My qosmio connects to my wireless network but after 15 minutes, it disconnects a DNS server is not found I know that's not my router because all other wireless pc connect. It seems that wireless equipment is either a faulty driver or hardware is to ventilate.

  Any suggestion is welcome. I have updated the driver and tried to turn off the wireless and it re-engage.
  But still, it disconnects.

  Hi mate

  DNS problems mainly affect the router problems.
  I think you should try to reset the router WLan first.
  In addition it s recommended to update the WLan driver.
  You must use the most recent of which are available here:
  http://APS2.toshiba-tro.de/WLAN/

  I had a DNS problem with my PS3 connected to the kind of router home was that my laptop could not connect too and the same error was noticeable.
  I have reset the router, checked all the settings and after 10 minutes, the two devices could run again.

  Welcome them

• Toshiba 42VL863 and DLNA - disconnect after 30 minutes

  I have the television on the cable network with shielded cable category 7, gigabit lan on a switch, such as media servers, I have a Qnap TS-509 with DLNA, all connected devices (tablets, PC and other devices) reproduce the video stream without problem.

  The TV instead: after 30 minutes of reading device tells me disconnected.
  I tried everything, but I can't see a whole movie.
  I demand an answer from toshiba. The money that I gave for this TV were not false, but good.

  I use DLNA with my Toshiba TV but you can check at all first if maybe some firmware update is available for your model of TV.

• PCOIP Session disconnects after 15 minutes

  http://communities.VMware.com/docs/doc-17799

  I have about 50 clients that disconnect them all their PCOIP session after 15 minutes. It disconnects without worrying if they are actively using the mouse/keyboard or not. In the windows application log, I get a declarant to VMware View event 102

  "In waiting for portal logon has expired for user domain\user, wssm has not started correctly, or the user could not connect and connect." In waiting for County left = 0 "

  I checked the following VMware DOC (http://communities.vmware.com/docs/DOC-17799) and the Userinit registry key is set correctly. I also checked that the WSSM process is started. If the key work correctly as well.

  If I restart the WSSM. EXE, the problem process is delayed for a few hours, but comes back and disconnect users after 15 minutes again. Have to restart this process on each of these virtual machines is becoming a pain.

  I tried to change the delay setting in the GPO ADM template, but to the maximum setting login Ticket is 900 seconds (15 minutes). I know that I can directly change the registry key "\VMware VDM\Agent\Configuration\VdmConnectionTicketTimeout HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.", but I don't want to work around the problem - I would like to fix.

  From my understanding, the user gets a ticket valid on connection, 15 minutes later the ticket expires and the user is disconnected, and then reconnected immediately and the cycle repeats. I guess that the ticket he supposed to get a new ticket some time in this window of 15 minutes, but for some reason any is not.

  Any ideas?

  Take a look at your PCOIP logs and see if you can determine what is the code of disconnection.  You can cross reference here to see why it is disconnected.

  http://KB.VMware.com/kb/2012101

• Drive HARD keeps falling asleep after a minute on my Satellite M40

  Satellite M40x-175.

  I've updated the BIOS with the latest version (1.60), and since the disc hard continues to fall asleep after a minute, no matter the power Windows or Toshiba Power Saver Settings.

  Toshiba will be out an updated BIOS update soon?

  Help, please.

  Hello

  I put t think that it s a bad BIOS function. As far as I know in the BIOS, you can change the settings for the HARD drive. Please check. Moreover, Toshiba Power Saver disabled power Windows settings. Have you checked the parameters of energy saving modes?

  Good bye

• Internet disconnects after 5 minutes

  Hi I was using my PC for a long time. I went for the weekend, and when I came back, I got a problem.  Every 5 minutes or so internet stops working.  There is no notification that a cable has been disconnected.  When I type something in the address bar it keeps loading but the page never comes to the top.  It is not my hardware or ISP because I started another operating system (fedora) and it worked fine. A temporary solution that I use is to disconnect and reconnect the eithernet cable.  But then the problem occurs again in 5 minutes.

  Things I've tried:
  1. disable internet card
  2. set a static ip address
  3. release ip/renew ip
  4 uninstall internet card
  5. restart the router

  Hi AppleWilliam,

  Thanks for posting. The first thing we must do is to determine where the issue is in fact. This could be a problem with a piece of hardware, Internet Explorer, Windows or your ISP.

  First when the problem occurs again do the following.

  Type the following command:

  IPCONFIG/ALL [Note that there is no space between the oblique and ALL bar].

  Right-click in the command window and choose select all, and then press enter.
  Paste the results in a message here.

  In the same command prompt window, identify the DNS and gateway (it will look something like ... default gateway: 192.168.1.1 and DNS servers...: 192.168.100.54 )

  Now in black comand prompt, type the following command:

  PING 192.168.1.1 (by replacing your IP of the gateway here) [Note that there is no space between the oblique and ALL bar]
  Let us know if you get the response or timeouts.

  Also again once in the same window type the following command

  PING 192.168.100.54 (by replacing your DNS IP here) [Note that there is no space between the oblique and ALL bar]
  Let us know if you get the response or timeouts.

  If the answer then you can have a problem with your web browser. If you are using and other Web browsers with test and see if you have the same result.

  If you do not get a response, test with another computer if possible to see if the problem persists there. If the problem does not occur on the other PC, then check your network cable connected to the PC and see if there is a link light. If there is a clear link then try to replace the cable and see if the problem persists.  If the problem persists after replacing the cable with a known good work. If the problem persists with a good cable to work known so try another port on the router or switch.

  I hope this helps. Please let us know if any of these steps did or did not solve your problem.

  .

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Wireless disconnects after a few minutes, restart result BSOD

  Hello, all of a sudden my wireless connection keeps disconnecting after 5 minutes, and then I restart my computer it will donw with a screen BSOD saying driver_power_state_failure.

  There are a few available mini dumps well as I write.
  I have a Lenovo laptop, T420 with intel centrino wireless 6205 r, running windows 7.
  Can I attach the mini dump here somehow.

  Hi, Germain,.

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

  I wish that you disable the Windows Firewall as well the antivirus temporarily.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Let us know the status.

• TC6 Firmware - call disconnects after 2 hours

  Hi all

  Our client complains that after the firmware update on the endpoints of telepresence (C40, C60, EX90) to TC6.x, there are two questions:

  1 end with TC6.x points will disconnect after 120 minutes to be connected to any appeal initiated by the remote end.  They will not cut the minute 120 if the TC6.x Unit has initialized the call.

  2 end points with TC6.x cannot connect to units MXP running F6 or earlier.  Since we MXP Codec Software F6 and F5 this is causing problems with the calls point to point.

  They have units with the TC5.1.6 software which have no problem at all. The only thing among others as the routers and switches is a VCS controller.

  Anyone has any ideas on what is the cause?

  Thank you

  John

  In TC6, we turned silently on TCP KeepAlive for the session h225 running with the default time of linux tcp_keepalive_time of 7200 seconds.  That would probably explain the disconnection to 120 minutes which sees the John after moving from TC5.1.6.

  I would also say that if this is the case, there is something which is tcp to the current between the two devices.  The firewall is also my first thought.  Perhaps WAAS on a router?  Sometimes you can get a clue that this is occurring by comparing the tcp ack/seq/windowsize header to see if it is different between the sending to the receiving side for the same package.  Something like 'tcpdump-s0 w /tmp/h225.pcap port 1720' root must limit the collected output.

  The TC6 troubleshooting located here would be a good reference in newspapers and tcpdump to use for troubleshooting signaling related issues:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/troubleshooting_guide/tc_troubleshooting_guide_tc60.PDF

  The example uses this doc does not filter the traffic and John you do not want to limit the output of tcpdump only for signalling interesting to avoid problems with the size of the OCAP collected file.

  We have a bug open better control KeepAlive on the session h225 (CSCub20591) but not clear if/when it will be executed and for now if there is something that is expire tcp sessions in the network, changes will be made here to avoid this problem.

  For the 2nd question, I'm not aware either a problem with older MXP but your approach Martin to try a later version of the software would also be what I would recommend.  If you need to solve problems with old software MXP TC6, the same troubleshooting guide h323 newspapers are where you want to focus on to see where in the handshake the call fails and compare this output between TC6 and TC5.1.6 as to what has changed that can have an impact on this.

• MapleStory disconnects after about 2 minutes in Windows 8, no problems with Windows 7

  I just got a new laptop with Windows 8 on it. The specs are well above what is needed for the game, which shouldn't be a problem. I am able to boot and log in the game, but after about two minutes, it disconnects, gives me an error message saying: "unable to connect to the game server. Please try again later. "The window closes so saying me that I was disconnected. The game works perfectly fine on my old laptop, which is running Windows 7 and has worse characteristics.

  I tried to run in compatibility mode, but get a different error after blackcipher loads, but before loading the game, saying: "the instruction at 0 x 00649243 referenced memory at 0 x 05055215. The memory could not be written. Click on OK to terminate the program. »
  I've looked everywhere and can't seem to find solutions.
  If it helps, my computer is a dv7 HP Envy with an Intel i5, 8 GB of RAM and a 2 GB nvidia geforce GT graphics card.
  If anyone knows a solution to make it work, it would be most appreciated. It seems that a few other people have the same problems, but others with Windows 8 have no problem, so I hope that maybe it's just a setting I need to change.

  Hi Sannesteenhuis,

  Welcome to the Microsoft community.

  Please answer these questions to better understand the issue.

  1. Have you tried the steps by Pinaki displayed? If Yes, then what is the result?
  2. Have you tried measures to solve this problem?

  I suggest refer you to the following procedure to copy the Event Viewer logs.

  To view the events in the Event Viewer Application log:
  1. press the key Windows + X key and then click on Control Panel.
  2. double-click Administrative Tools, and then double-click Event Viewer.

  NOTE: Alternatively, you can start Event Viewer by starting the Microsoft Management Console (MMC) program that contains the snap observer of events.
  3. Click to expand Event Viewer (if it is not already expanded).
  4. click on Application.

  The events that are logged in the application log are displayed in the right pane.
  5. to view more details about a specific event, double-click the event that you want to display.
  6. to copy the details of the event, click the copy button, open a new document using the program in which you want to paste the event (for example, Microsoft Word) and then click on paste on the Edit menu.

  Also suggest you try to install the game in compatibility mode and check if it helps.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope that the information provided was useful. If you need other assistance do not hesitate to post. We will be happy to help.

• Skype disconnects all internet after 24 minutes on appeal

  I try to be in a call with my friend, but after 24 minutes it disconnects completely my computer from the internet. Internet still works on all other devices, it disconnects just my computer from the internet. When I reconnect, always 3 minutes later it disconnects again.

  I tried solutions:

  Unchecking the upnp

  reinstalling Skype!

  reboot the router!

  Literally none of em work. I had this problem at this time last year and it is resolved after a week, but I have been with this problem for 2 weeks now. Help, please

  I still need help with this guys, any solution is useful

• My mac automatically disconnects while playing songs from Itunes after 20 minutes. How to prevent this

  While playing the songs on Itunes, my MacBook Air switches off automatically after 20 minutes.  This occurs regardless whether I am Mac on battery or a power adapter... I am using Ios El Capitan, but the problem exists since even earlier and happened with all versions of the operating system.  How can I prevent this logging on because it's a nuisance while playing albums longer...

  Open the security & confidentiality of system preferences, unlock, click Advanced and disable the automatic disconnection.

  (137123)

• my computer disconnects me after 3 minutes of inactivity. P6310y model number

  My computer disconnects me after 3 minutes of inactivity. Model p6310y model numbert

  Hello

  Open windows control panel. Open preferences, click on screen saver link at the bottom right, and in the next window, uncheck the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change.

  Kind regards

  DP - K