Keep records for read-only reset

I uploaded a few photos from my iPhone using the cloud and kept that find whatever program I opened in, the computer would not save changes as it said that the file or folder is read-only.  I checked the file by clicking on properties and ensure that the read-only box has been disabled.  Then, I checked the file do the same thing and found that the folder itself has been set to ReadOnly.  I then unchecked that hit 'apply' and then returned to the folder for editing photos, but it's the same thing.  Then, I went to the propeorties folder and found he had turned to read-only.  I thought that reading only may be applied to a higher level, namely my pictures or My Documents, which he was, if I disabled and it is simply coming back again!  I was wondering if there was a way to fix this or if there is a higher level than I can uncheck the read only options for if that's what is behind each photo be read-only.

No. I thought maybe iCloud still had the file to open.

You can check the permissions to make sure that you have write access to the files.

I would like to use Process Monitor to get more information about what exactly is happenning. But this produced a lot of data and needs a degree of knowledge of the functioning of WIndows.

http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

If you decide to try this, there is an introduction to use it here:

Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

Tags: Windows

Similar Questions

  • Read-only resets, Highlighted and unaudited

    Vista...

    If I have a folder (or file) that is designated read-only, can I deselect it, apply, get out, pull up the properties close and it will be underlined again by itself.

    All my folders are defined in read-only on my desktop and I can't do everything to zero. They all come back to read only by themselves. Also, maybe the difference between files and folders, but my file Number boxes are put in evidence and files boxes RO are archived

    You need a control total and perhaps owner changes.  Are they really read-only when opened (or you are actually able to change or revise their despite the highlight or the box)?  This applies only to folders and desktop files or other files and folders as well (like those in your Documents folder)?  In Vista, a LOT of files and folders are marked read only intentionally by the program (unlike XP) for prevent editing system and other files/folders that should not be changed (at least not unless carried out by experts or management to experts).  This is usually not does not apply to office supplies (except maybe the settings.ini which you should leave alone).

    To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

    To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

    Once you have the full control permissions and full ownership (and have replaced the permissions inherited from the folder parent in the Advanced Properties section) then you should be able to make the changes you want.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Active DataGuard: ora-16000 database opened for read-only access

    Hi all

    Application, I get the error message "ora-16000 database opened for read-only access, while my primary database is up/open for read/write." When I stopped the standby database, the application works very well.

    Please suggest what could be the reason and the solution for the same.

    OS: RHEL - 5.3

    Oracle: 11.2.0.1.

    Kind regards

    Ronak Masudi

    Patch 9322138 ORA-16000 on recursive SQL on standby database Query rewrite

    I wouldn't be sure if tha applies to your scenario. What you might want to check is this host = xxxx in your tnsnames file points to the right machine or resolve the correct IP addresses. Perahps you have confused primary and standby.

  • DBMS - data not visible for read only account users.

    I created below to know the status of my lots which run on server every Sunday.

    CREATE OR REPLACE VIEW CAFDB_REFRESH AS
    SELECT
    log_id,
    owner,
    TO_CHAR (log_date, ' ' DD-MON-YY HH24:MI:SS) TIMESTAMP.
    job_name,
    status,
    ERROR #.
    run_duration,
    INSTANCE_ID,
    additional_info
    Of user_scheduler_job_run_details;

    It works fine and I am able to get the information.
    now, to make it visible for read only account users - using «grant select» I gave access and created also means public.

    but it shows only the names of columns in read only account data.

    How to make this visible to read only account?

    Please guide.

    Views USER_ will have only the objects owned by the user executing the query... In your case, it will be only schedules made by the user.

    You will need EU ALL_ or view s/n (all_scheduler_job_run_details)

  • Window7 has an attribute of file for reading only the value that requires a reset, how can I?

    I just dated windows from vista to windows7, when I went to play WOW, I got an error message because a read only attribute was introduced thyat opposes writing data to files. I read several answers and tried everyone. I can't always reset this secret attrtibute, whats Suur or should I go back to vista if I can.

    SUCCESS, IT WORKED!
    Reinstall your games in one that is NOT located in Program Files.

  • Records keep catering to read-only

    Why Windows 7 keep coming back to read-only folders.

    This would prevent me from the Picasa3.6 factory automatically read files in specified folders.
    I unchecked the box completely to see auto recheck after the closing of the screen.

    Only one user on the system, but often do not show as an administrator and during the troubleshooting process requires to be turned on administrator.

    If I can get the system to hold that the unchecked don't read only status, it hangs on a blue screen of death.

    Help, nothing seems to have been posted on this concern which is useful.

    Check here:
    http://support.Microsoft.com/kb/326549

    Tom

  • Turning point for read only files

    Folders with subfolders and those without, keep going 'read only' even if with a click right/properties I continues to turn off the read-only.  Why is this?

    By its design.

    The box greyed out for a folder means basically nothing, no change, waiting to be used. This is because read-only in the properties of the folder is only used to apply or remove the setting of all the files in the folder read-only at the same time. If you clear the check box and click on apply, then the files in the folder will be deleted from all they have read-only attributes. Like wise, to check the box to apply the attribute to all files.  The place appears again the next time because, once more, you have not used.

    Another response of the community of Windows XP newsgroups

  • How to stop Win7 public files read-only reset?

    I use a 2 PC Win7 SOHO network and 1 WinXi PC.  whenever I have reset all files in the Public directory to "read/write by everyone", Wind 7 resets read-only.  In addition, although ' I'm the only user, he always tells me that I need to "contact my administrator" for open/save/delete etc files.

    Hello

    According to the description of the problem, I understand that whenever you reset all files in the Public directory to "read/write by all the world", Windows 7 resets read-only and you get a message stating 'contact admin' for open/save/delete etc files. I understand the inconvenience.

    (1) if it works much earlier?

    (2) exactly how you are trying to share files on the network?

    (3) is the specific issue of Windows 7 computers?

    I suggest you to refer to the following articles and check if it helps to solve the problem.

    Method 1: File sharing essentials

    http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

     

    Method 2: Share files with someone
    http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

     

    Reference:--

    Networking of computers running different versions of Windows

    http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

     

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

    Kind regards!

     

  • Audit (app.alert) for read-only and submit or nevermind

    Hi script ninjas. I have a MouseUp action a button titled 'Finalize & E-mail '. Based on input from the end user, it is necessary to add an alert message to reduce a large volume of phone calls 'I can't add more information in the form."

    My intention was to have a button that would make the 'read only' form and then submit by attaching in the form of an email. But it seems now that I need an app.alert to go with it. So, I fought on where to add the "else" statement in the JS below. Without this statement else what I get is - an attachment with a read-only form or an email that is not. What I want is - if the user chooses "no," the user back to the form to continue adding information. I'm sure it's an easy fix, but I went down too bad rabbit hole today. Thank you in advance.

    var r = app.alert ("are you sure you want to develop and submit this document? This action can not Ωtre annulΘe. ", 2, 2) ;

    If (r == 4) {/ / 4 is Yes, 3 is not}

    for (var i = 0; i < this.numFields; i ++) {}

    fname = this.getNthFieldName (i) var;

    this.getField (fname) .readonly = true; makes all readonly fields

    }

    }

    It's the return of form e-mail. It is hardcoded

    to make the form comes back to the same address.

    Change of address on your form to match the code below

    var cToAddr = " " [email protected] "" "

    var cCCAddr = this.getField("PROJECT_APPLICANT_EMAIL").value + ";" + this.getField("LEAD_AGENCY_EMAIL").value;

    var mySubject = this.getField ("Agency") .value +' | "" + this.getField("Today").value + "| "" + this.getField("Counter").value + "| "+ this.getField ("Project Title") .value;

    Set the body of the text of the e-mail message

    var cbody = 'Thank you for your Document.\n\n' + 'Save the attachment of the completed form for your records\n\n' + 'your document is now in good hands. "

    Send the PDF as an attachment to an e-mail

    this.mailDoc ({bUI: true, cTo: cToAddr, cCc: cCCAddr, bassujetti: mySubject, CMSG: cbody});

    All you need to do is to put all the code in the block that starts with the if, like this condition:

    If (r == 4) {}

    put the code to set read-only fields and submit the file here

    }

  • How to limit the request for read-only access

    We are the migration of 7.1 to version 11.1. As part of the Cup on the activities, I need to keep the old server on read-only for a few days and then completely block access. Can you please let me know if there is a simple way to limit read only access on Server 7.1, instead of changing the security settings of all groups on the server?

    Grateful for your help!

    What would you say to put the databases in read-only mode until you delete access.

    Esscmd - BEGINARCHIVE
    MAXL - [alter database | http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/altdb.htm] archive to start at app.db...

    There are equivalent commands out of read-only mode, the links will take you to the information you need.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Selection of records for today only?

    In my view, this should be easy, but everything I try is back to launch no results.

    Basically I have an existing query that uses an outer join to bring 2 tables together (this is for a very basic tracking site).

    Without the clause of "WHERE to", it performs exactly as I had hoped.  However, I need to be able to refine the results of the current day only (and perhaps other beaches of dates in the near future).

    The end result, I'm looking for is a list of sites and the unique visitors for each.  Yet once, it works fine when I run it without narrowing down for today only.  The field 'eventdt' on the MySQL server is a datetime type.

    < name cfquery = "getsites" datasource = "#datasource #" >
    SELECT s.id, s.sitename, count (DISTINCT t.uuid) t_cnt, t.eventdt, t.sitename AS site
    S SITE
    LEFT JOIN followed t
    ON s.sitename = t.sitename
    WHERE t.eventdt = #CreateODBCDate (now ()) #.
    GROUP BY s.sitename
    ORDER BY s.sitename ASC
    < / cfquery >

    Thank you for the pointers :-)

    Today = createdate (year (now ()), month (now (), day (now ()));)

    tomorrow = dateadd ("d", 1, today);

    in your query

    where eventdt > = today

    and eventdt<>

    With the syntax appropriate of course.

  • List of values do not fetch all records are read only 25 records of entry

    I have a vo... on which an attribute is to have a list of input values that came from other vo called peoplesearchvo...

    On the user interface, I get only 25 records in the list of input values... I tried several things but still did not work

    in the peoplesearchvo... Tuning part I gave all the rows in batches of 20, according to the needs... Mode... scroll and rangesize = 1

    On the user interface in the section of links to the properties of the iterator, it is rangesize - 25 and updating is the (delay) default mode.

    I did not change when even... I get only these 25 records failed to retrieve all records, even after I scroll down.

    Can you get it someone please let me know about it

    Thank you

    Yes, it is a bug in the ADF (fixed in 11.1.1.7.0).

    If you have oracle support account, see note: 1456824.1

    According to this note, you need to patch 13924897

    Dario

  • How can I give my files for read-only permission

    I want to give permission to my files, any other person do not delete & take my administrative user of files.on I want to give permission

    What to know before applying permissions to a file or folder

    http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  • DataGuard open read only mode: PING [ARC2]: unable to connect before Heartbeat "keeps." The error is 88.

    Hello

    I created a data guard with 1 physical and 1 relief database.

    Database: 11.2.0.4 - Enterprise edition

    Everything is OK, if the wait is still in State of Mount.

    but.

    When I want to open the day before in read-only mode, log shipping is stop.

    I found az error in the primary newspaper:

    PING [ARC2]: Unable to connect to the standby Heartbeat "keeps." The error is 88.


    The newspaper of Eve:

    alter database open read only

    AUDIT_TRAIL initialization parameter is changed to OS, as DB is NOT compatible to the database open with read only access

    Wed Dec 03 12:02:02 2014

    SMON: enabling cache recovery

    Dictionary check start

    Verification of the complete dictionary

    Database character set is AL32UTF8

    No Resource Manager plan active

    off replication_dependency_tracking (no replication multimaster async found)

    Physical standby database opened for read only access.

    Completed: alter database open read only

    Wed Dec 03 12:02:03 2014

    Mo 4977 db_recovery_file_dest_size is 2.29% used. It is a

    user-specified limit on the amount of space that will be used by the present

    for the files related to the recovery of databases and does not reflect the amount of

    space available in the underlying file system or ASM diskgroup.

    Thanks for your help and sorry for my bad English.

    LACI

    Oracle error: ORA-00088

    Error description:
    Cannot be executed by the shared server

    Cause of the error:
    Debug command issued on a shared server.

    Action:
    Run the command again using a dedicated server.

  • How to show total for an Object(read only, not based on entity) view based query

    Hi Experts,

    JDEV version 12.1.3.0

    I want to show the total of column salary for reading only VO (not based on the entity, but the query based).

    The readonlyVO has some display criteria to display the data. So the total should appear only for values, I see in the user interface.

    Thank you

    Roy

    Looks like JDEV problem which was not allowing me to add the transition attribute. After the reboot of jdev im able to add the transition attribute.

Maybe you are looking for

  • Error 601 on HP Pavillion G7 1355DX start - but I can't locate CMOS to replace

    Hello We have a 1355Dx Pavillion G7 + 2 years and he began to give the 601 error at startup.  I did search these forums and all can determine, is a problem of internal battery, which means CMOS.  But when I turn the laptop and remove the battery, the

  • Write to the spreadsheet file (how to start new lines)

    I'm reading signals from a hardware device and try to write it in several columns using Scripture in the spreadsheet file every few seconds. My problem is every time a new signal comes in, my program seems to overwrite the previous signal when writin

  • Install Scanjet 7650 on new computer

    I try to install my HP Scanjet 7650 to a new 64-bit Windows 7 computer. I don't have the installation CD. I have download the Installer tries to install a program corporate ISIS. I find myself with software to share the scanner on a server. All I wan

  • Windows upgrade vista 32 - bit to 7 32 - bit and then to 64-bit

    Hi all I got a computer with Windows Vista Business OA EM SEA 32-bit. Later, Fujitsu gave me the free upgrade to Windows 7 Professional 32 bit. Now I want to reinstall Windows 7 Professional but its 64-bit. Can I use the license again? Or I have to b

  • ePrint works with SnapFish, but Internet printing issues white pages.

    HP Pavilion Slimline 400-224 With ePrint now, when you try to print from the internet I get blank pages. op sys is slimline desktop PC 400-224; 8.1 Windows 64-bit scan the doctor checked ok. I changed print port-on ePrint and can print from the inter