Keep the highway-VCS-control or switch to Expressway-C/E?

Similar Questions

• Can we use licenses of the highway on the highway VCS?

  Dear team,

  We have 10.5 CUCM, control VCS, MCU, ISDN GW TMS Infrastructure deployed in one of our customer place. Now the client asking the Internet settings to be able to join CUCM registered endpoints. But we got the highway licenses and so we installed aboard the VMinstance Highway and installed licenses, now my query is this set works? Otherwise, we can transfer those licenses to expressway VCS?

  Please suggest!

  Hi Eric,.

  In brief - customer is working to achieve both Business - to - Business (B2B). Yes, that can be reached. Note: You will need to have the right set of licenses.

  Note: you mentioned VCS control and the edge of the highway. So, what are the components you have in the network? Control of VCS and VCS Expressway or VCS Expressway-Core and VCS Expressway-edge?

  Kind regards
  Chirag

• VCS-Express and the integration of control VCS

  Hello

  I have the following question on the integration between VCS and VCS Express behind NAT devices.

  Control of VCS in the configuration of the area customer I will use the (Real) Global IP address location > Peer Address or I have to use the private IP address.

  Thank you

  Hello

  It depends on the interface how you have connected on the highway. So if you have two connected interfaces then the internal one is configured with a private address, and that you would use on the control to send traffic to. But to your question, I assume you have a connected only interface so you can use the public ip address for sent traffic of venture capital control.

  Ask if you need more information.

  Best regards / / Andrey

• Keep losing the customization of controls after the new start or updates [firefox 24/25/26] 'customize navigation as bookmarks, back buttons and reload '.

  Since the 24 FF and also in the 25 & 26 it keeps losing the customization of controls after new impetus or updates.

  I always do this: 'Customizing the navigation like back, home, bookmarks, & reload buttons' - http://mzl.la/LqHj2n.

  When I updated from 23-24/25/26 or have a crash FF in one of these versions, the customization is default return. I do not have to repeat this every time!

  What is your operating system?

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I want to switch to a different service provider, but keep the same domain name

  original title: domain name

  I want to switch to a different service provider, but keep the same domain name.

  If you are referring to your own personal domain as "MyName at mydomain.com" email then you should be able to change the host very well.

  You need to change the e-mail servers in the DNS.
  You should be able to get support and complete itinerary on the mail, Web hosting.

• Accommodation of the presence on the next information control VCS

  Hello!
  Could you please help me?

  What should I do to host the presence information of my domain name SIP not on local control of VCS, where points registered endpoint, but VCS control located in the nearby area?

  Disable the server of presence on your own VCS control while allowing the presence on VCS neighbored control server.

  Also make sure that your local SIP domain exists also on VCS neighbored control and that the rules of research between these VCS allow presence SIP traffic pass freely between the two (AnyAlias for example).

  -Andreas

• How to keep the control on the same line after clicking the Cancel button

  Hello

  I use JDev 11.1.2.4.

  I have a search in a table (form A) that has a link to change another form (form B).

  Form B have two save and Cancel buttons with Commit and Rollback actions.

  Action on the Undo button is

  ADFUtils.findOperation("Rollback").execute ();

  Question: Suppose I'm at rank 3 on the form and click on the link to call the B form. Now, when I make some changes to the form B and press the Cancel button, the control returns to the row 1. I want to keep the control on line 3.

  any ideas?

  Thank you

  What do you mean by form? is this page?

  Is the form B and form A in the same page or diferrent?

  If the 2 form in diferrent pages you can add parent the iterator in the pageDef. of the child page

  To add iterator the pageDef parent. child follow this:

  1 - Open pageDef. of the child.

  2 - press executable section

  3. in the Insert item dialog box select 'Iterator' and then 'Ok '.

  4. you will find the DataControl extend above then select the Master iterator, then press 'Ok '.

• Change of control, keep the scale of fonts

  Hey,.

  I have a 'mx:Text' with a text control and the width is equal to 350 and height 350. If I double the measure (700 x 700), how can I keep the same space used by the text? You can see that I double the width and height, but if I double the fontSize of the text control will use more lines in comparison with its old width and height.  So, how can I maintain this scale proportionally?

  Thank you

  Embed fonts and the scaleX and scaleY value = 2

• Data from Web service to a Web service that keeps the Session control

  Following the example set by Rama cricket in [maintaining Session with JAX - WS | http://weblogs.java.net/blog/ramapulavarthi/archive/2006/06/maintaining_ses.html]; I could create a WebService that keeps the sessions using JAX - WS.
  
  Now, I want to use this WebService, from control data in an ADF application, but unfortunately, I do not know how to tell from this data control that I want to maintain the session.
  
  I don't know if I should extend and overwrite the FactoryClass (oracle.adf.model.adapter.DataControlFactoryImpl) or if I have to do with the application definition (oracle.adfinternal.model.adapter.webservice.WSDefinition)
  
  I'm new to ADF and I understand that it can be simple, I just need an example or documentation to read.
  
  Thank you

  For the service, you can create a proxy of jax - ws and as mentioned in the document that you cited, activate the session on the client.
  This client class, you can then create a data bean control and use it in your ADF application.

  Vishal-

• I have Vista Home Premium 32 bit: can I switch to a 64 bit OS and keep the same apps, hardware and software, I already have?

  I have a system of 3 GB/500 GB HD in Inspiron 530 Dell, Vista Home Premium 32-bit.  I need to restart more frequently and the system works more slower and slower... so I think the upgrade.  Can I move to a 64 bit OS in Windows 7 or 8 and keep the same hardware and software, applications that I already like Office 2007, Photoshop Elements, etc... ?  What are the benefits to 64-bit?

  Hello

  There is no way to upgrade from 32 bit to 64 bit.

  It should be down with a clean install.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Keep the dng or CR2 files when switching from Lightroom and Photoshop.

  From Lightroom and Photoshop, how can I keep the dng or CR2 files. Now it changes the psd and when I return to Lightroom it removes options in the section of Calibration of the camera, so that while I have a choice (Adobe Standard/camera faithful), after returning from Photoshop file I have "Embedded." How can I keep the dng or CR2 files

  Adding to the good advice of Alfred - a raw file cannot be registered as the other files.

  Its only use is the basis for the creation of new files, which must be regular files, such as tiff, psd or jpg.

  When you edit a raw file in Lightroom, it does not change the file, the changes are written to the catalog.

  Optionally, save the changes in the form of metadata (xmp) sidecar files, or in the case of DNG in the file itself.

• Once I have to zoom on video in post production using the effects Panel and movement controls > scale how can I keep the sharpness of the image?

  How can I keep the sharpness after I Zoom.

  Never exceed 100% scale.  The image is going to deteriorate.

• How can I keep the screen locked in portrait mode

  MY gen iPad 3 had a manual lock to keep the screen in portrait or landscape mode. How can I block this function on my cushion of air 2?

  It is on the control center.

  You will have an icon sixth on this line to compensate for the lack of switch.

  

• See Express vs VCS Control series & Expressway

  Hello

  I am little bit confused what is the difference between the Expressway series and legacy VCS-C/E.

  If I deploy series Expressway (X8.6) running on the virtual machine as traversal server for ARM, can I use that as same as VCS - C and VCS - E, the installation program.

  By running the MRA, can I also used these local SIP/h.323 recording servers of the endpoints of SX and Jabber Video (Movi)? Can I need separate license to achieve?

  On the two highways are the licenses ordered. Are these already for what I want to achieve, or this is just for the deployment of the ARM?

  LIC-EXP-AN

  LIC-EXP-BASE-K9

  LIC-EXP-E

  LIC-EXP-GW

  LIC-EXP-SERIES

  LIC-EXP-TOUR LIC-EXP-RMS

  Thank you

  Sy

  So I need instances of additional and separate VCS to support records the of the SIP/h.323 endpoints. And need additional licenses for the latter as Non-parcours/course would issue licenses, commissioning, FindMe.

  OK, that all of these are specific to the series of VCS, while the freeway series does not have the provisioning and FindMe, it also has a system of license different call where it is a type of single license unlike licenses non-parcours course you have with VCS.  The

  TMS I 'LIC-TMS-PE-25' to activate the user commissioning for Movi so I want to use.

  You must use the VCS-control/Highway if you want to use video telepresence Jabber (aka Movi).

  Series Expressway (centre/periphery) are therefore only for ARM with CUCM deployment?

  Yes, Expressway series was created to provide courses of firewall and external recording to CUCM via Mobile and remote access capability.  It can also provide comments of Jabber, but MRA and Jabber comments cannot be run on the same server.  On another note, the series of VCS can take all the series Expressway, because the latter is simply a subset of the functionality of VCS.

• Highway VCS cluster

  Hello

  We intend to deploy VCS Cluster consisting of two expressway Expressway.  The two highway will be activated with Dual Interface. Need some clarification regarding the ip and dns address. Here is an example of setting.

  for example

  Highway of VCS A: 192.168.10.2 for the first interface.   192,168.20.2 assigned to the second interface and nattted to 77.100.42.23

  Highway of VCS B: 192.168.10.3 assigned to the first interface. 192.168.20.3 assigned to second iinterface and natted to 77.100.42.24

  name of the cluster: video.exampledomain.com

  FULL domain name: video.exampledomain.com will be be mapped both the public ip address 77.100.42.23 and 77.100.42.24 with the required SRV records.

  When customer movi connect to video, exampledomain.com traffic will be routed to 77.100.42.23 and 77.100.42.24 in "round robin" mode.

  Well confirm the above is the correct way to deployment and what will happen if A vcsexpressway is down. always the first call will fail because the rqurest will be sent to 77.100.42.23 and the second appeal attempt will succeed.

  Krishna.

  Hello Krishna,

  your deployment plan looks good, assuming that 192.168.10.x and 192.168.20.x are different subnets. Please be sure to set up clustering on LAN1 (the interface non-translated) which seems to be part of your plan.

  Concerning the behavior of call when one of the VCS is down, assuming that your SRV records were properly implemented and that the remote caller has good DNS SRV support for its implementation H323 and SIP, the appealing party must switch to VCS work in case of failure of the initial connection to the slaughtered VCS. In any case the result will depend greatly on the conduct of the appellant and his ability to switch to other VCS during his attempt to connect through the slaughtered VCS fails.

  Hope this helps,

  Andreas