keep the old activation key after installing a new version of windows - no upgrade!

Similar Questions

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• I have a HP 4410 T with 1 GB of RAM. Can I install a new version of Windows 7?

  I have hp 4410t 1 GB can always install a new copy of Windows 7

  original title: I have hp 4410t 1 GB can I still install a new virsion of window 7

  Hello ricardoaleman

  The system only comes with XP. HP does not offer Windows 7 as an option and is not likely to have the drivers for it. You can run the Windows Upgrade Advisor, but is not 100% because it will test for contradictory app and hardware that is capable of running. If it passes it still may not work due to lack of driver of the manufacturing support.
  http://h10010.www1.HP.com/wwpc/us/en/en/WF25b/321957-321957-64295-3852246-3955551-3958615.html

• Windows blocked key after installing a new video card and hard drive.

  I got a copy of Windows 7 Ultimate 64 - bit edition since the early release, purchased through Newegg. Since then, I used it on my desktop, which I update regularly. I changed the hard drives, processors and cards video several times and reactivated without a problem, but this last Friday, I installed a new video card and the DSS, and when I went to activate windows told me that my key was blocked without any explanation. I can only assume that this is because I changed my hardware configuration. My copy of windows remained only on this computer over the years. Here are the results of MGADiag running on my system.

  If there is any question about the legitimacy of my copy, I have the DVD, booklet, cases, cardboard sleeve he shipped initially and purchase of invoices from Newegg on the spot.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - D8YP8 - 79HTV-2GFQT
  Windows product key hash: OHt9YSDSzhyPDA0DedmCR0Hfwj8 =
  Windows product ID: 00426-OEM-9154261-98225
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7600.2.00010100.0.0.001
  ID: {6702320D-40F0-4FC3-A8FA-60775C31A418} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.130104 - 1435
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {6702320D-40F0-4FC3-A8FA-60775C31A418}1.9.0027.06.1.7600.2.00010100.0.0.001x 64*-*-*-*-2GFQTS-1-5-21-605449622-1443938486-240076793900426-OEM-9154261-982253MICRO-STAR INTERNATIONAL CO., LTDMS-7577American Megatrends Inc.. V1.6 20090924000000.000000 + 00011B83607018400FA04090409Mountain Standard Time(GMT-07:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00182-542-698225-02-1033-7600.0000-0742013
  Installation ID: 013213720201413403062894943331046813518366624835351974
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 2GFQT
  License status: initial grace period
  Time remaining: 38700 minute (s) on (26 day (s))
  Remaining Windows rearm count: 3
  Trust time: 18/03/2013 20:21:46

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:16:2013 05:01
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: OgAAAAEABgABAAEAAAADAAAAAgABAAEAln2G8G4eCIVU0Mj/jDUQM1TyRGN6mFKayIqLyP7M7AmOLg is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC 7577MS A7577100
  FACP 7577MS A7577100
  HPET 7577MS OEMHPET
  MCFG 7577MS OEMMCFG
  LASRYVITRAGE 7577MS A7577100
  SSDT A M I POWERNOW

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can not activate after installing a new motherboard under Windows 7 Ultimate

  Hello everyone I formatted my pc because I installed a new motherboard, now when I want to reactivate my window tells me that the product key cannot be used on this pc, my windows is 7 ultimate and not OEM

  You should follow the advice of André and use the phone activation method. There should be someone who speaks English to help you with the activation.

  Next time do not change the report, there is nothing in there that someone might use or rob you.

  Try activating the phone and after another report.

• Using the old Master of MultiSim databases in New Versions

  Hi all

  I have the following question. Is it possible to use old Master databases in new versions of Multisim?. For example, I try to use the Multisim 10 of Multisim 11 database but it does not work. There are some parts that are in the 10 version of the database that are not in version 11 of the database.

  I use Multisim 11. I have the file Multisim 10 database of origin of my old installation. Thank you.

  Hello

  It is not possible to use the database to a version of the software in another. The master database has components based on the version you purchase. It is possible for you to place the components (to the exclusion of the lively and nonparametric) on your design in version 10 and open the drawing in version 11 or 12 and save them to your user database. To save, right click on the component, and then select Save the database component.

  I hope this helps.

• Backup need help to install a new version of windows xp that has been saved in my c: / my 053110 0240 pm backup

  I've accidentally done a system recovery for windows xp on an old record.  On the back of the screen it said that it would save my current version of windows xp on my drive c as c; /My Backup 053110 0240 pm.  It appears in my drive c currently but I can't understand how to reinstall it from there. I tried the system restore and it keeps only let me restore to the point that I put the old version in and nothing before.  How can I get my backup version to install from drive c. help, please

  Please repost your question in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L300 PSLB0A - impossible to use the Fn & Touchpad keys after installing XP

  Hello

  I just went down from VISTA to XP and setting based dirvers but there are a few problems.

  After I installed XP sp2, I installed:
  1 driver Chipset
  2 display driver
  3 sound driver
  4 Lan driver (include wireless)
  5 driver Modem (it's a software modem driver for toshiba)
  until this procedure, it seems.
  I installed the common module and do a restart then set up touchpad driver and Tablet touch power switch program.

  But the touchpad does not work.
  I also tried to install toshiba controls but he said 'It must implement the common module first' although I have implemented the common module.

  Wireless Internet, sound, display are OK now.
  But I can not use touch-pad and other function keys.

  Can someone give me a solution for these problems?

  I doubt that you can remove the common Module first because I didn t he find in Add & Remove programs.

  But as Akuma suggested to install the common Modules like the first!
  The common Modules is an essential application to be installed initially.

  You must also update the XP

• Find the nvidia Control Panel after installed of new Vista Business (Spack2)

  Recently installed the new hard drive and therefore had new Vista Business installed (downloaded, with Service Pack 2).  The Nvidia Control Panel is 'gone' if I can is more set up two external monitors + for computer laptop is to say as a "clone".  PC automatically to an external monitor as soon as plugged in.  When I connect to an HDTV, it's same with a resolution of crazy.  Any advice?

  Thank you

  Hello

  ·        You have installed the drivers for the graphics card from nVidia?

  Once you install the drivers for the graphics card, it automatically installs the nVidia control panel. If you had bought the graphics card, you may have been provided separately with a DVD, check also in the DVD provided with control panel map.

  To download the latest drivers follow the link given below.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install the old CD HP Photosmart on my new laptop Toshiba (Windows 8)

  I recently bought a new laptop from Toshiba with Windows 8.  I have a 5 year old, but I like it, HP Photosmart 7200 Series C.  I can not get the CD to download on the new laptop - he says that he does not meet the requirements of the system.  I downloaded from the internet, but do not have the ability to perform tasks of the laptop - want to do analysis or checking ink levels, etc.  Scanning is a problem since I often use this feature and it is so much easier and faster to scan from the screen of the laptop to the printer/scanner.  Thank you for all the ideas.

  Has worked like a charm - you're my hero!  It's ongoing struggle for a few months and you got the solution!  Thank you so much...

• Update a column to keep the old values and by adding a new

  I have to update a column...
  
  Select * from test;
  
  TYPE_TEXTE RULE_NBR
  -----------------------------------
  30 AAX, AAR, AAV, AAB, AAK
  40 BBD, WWN, AAF, AAB, AAK
  
  now, I have to add BBB, WWW where rule_nbr = 30 and CCC, TTT where rule_nbr = 40
  
  so this stmt update will do...
  
  
  UPDATE TEST
  Type_texte SET = "AAX, AAR, AAV, AAB, AAK, BBB, WWW.
  WHERE rule_nbr = '30';
  
  
  Update test
  Set the argument type_texte = "BBD, WWN, AAF, AAB, AAK, CCC, TTT.
  where rule_nbr = '40';
  
  
  I was wondering is there an another way to update the same

  LPS says:
  UPDATE TEST
  SET Type_texte = concat (type_text, 'BBB, WWW')
  WHERE rule_nbr = '30';

  Update test
  Set the argument type_texte = concat (type_text, 'CCC, TTT')
  where rule_nbr = '40';

  Check your answer ;) should be concat(type_text,',BBB,WWW') or type_texte |', BBB, WWW'
  You missed the point.

  See you soon,.
  Manik.

• cannot connect to internet - after installing a new copy of Windows Vista

  my computer is very slow and I decided to install a clean copy of vista, and now I've finished my computer does not connect to the internet more. It will work with the wireless or wired Ethernet.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > search for the latest network maps, etc. Vista drivers for it > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Mick Murphy - Microsoft partner

• Can I install a new version of Windows to place one not boot Windows 7 on a Dell laptop?

  Looking for a way to use a laptop computer that has a non-working Windows 7 OS on it.

  You could, but why not just use the recovery factory feature or try to repair the installation?

  If you are unable to boot from the Windows 7 Desktop, you will not be able to do an upgrade of the repair.

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

• Update to Microsoft Net framework 3 service pack 2 can I keep the 'old' or do I have to uninstall the

  • I have Windows XP Home Edition and I update through the Download Center.  I don't know whether to keep old service pack or not when the new ones are installed.

  * original title - when updated to service pack 2 for Microsoft Net framework 3 can I keep the 'old' or should I uninstall them. I have Windows XP Home edition. Thank you *.

  If you refer the download files, keep the incase you ever need to reinstall .NET that some of them may be prerequisets for future updates or service packs.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.