Keep trying to install important updates, but get the following error codes: 641, 80070641, 8004FF01.
Help, not very good with computers! Have you tried the Fix It convenience store without result, and whenever I try to update fails.
Hello
1. What is the description which are impossible to install updates?
2. what difficulty you are referring to?
I suggest you try the steps from the link below and check if it helps.
Method 1:
Set up your computer in a clean boot state and then try to install the update to windows.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2: If the problem persists, please try the steps below.
How to fix problems connecting to Windows Update or Microsoft Update:
http://support.Microsoft.com/kb/818018
Hope this information is useful.
Tags: Windows
Similar Questions
-
I run MGADiag.exe but I still have the same problem. Thank you very much!
Keith
I run MGADiag.exe but I still have the same problem. Thank you very much!
Keith
Windows Update Error 80070002
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698Perhaps, you must manually download SP1 & SP2 and install even in a clean boot state:
http://support.Microsoft.com/kb/929135
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7This would eliminate any interference from other programs, etc.
Instructions for manual installation are included in the links below: -.
Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx -
Try to install the security update KB967723 and Vista updates KB970430 and KB972145. Constantly getting error 8024200d code. Help, please!
Error 0x8024200D code is:
SUS_E_UH_NEEDANOTHERDOWNLOAD
The Setup program requires more data to download1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB967723&displaylang=en&stype=s_basic
2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB970430&displaylang=en&stype=s_basic
3. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB972145&displaylang=en&stype=s_basic
You can try to manually download and install.
or you can reset the Windows Update settings?
http://support.Microsoft.com/kb/971058and try again.
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
windows update
My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Get an Error 80070020, I am unable to find out exactly what to do. Every day for a few weeks he tries to install the updates and then stops to install but always ends up coming back. Can you help me please?
Hello
read thisL
Windows Update Error 80070020
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020
and also see if this helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Try to install Photoshop CC but get the following message, download error. Press Retry to try again, or contact customer support. (49)
Hi samir,.
Please see error download or update Adobe Creative Cloud applications
You can also view the nets below where the same issue was addressed:
https://forums.Adobe.com/thread/1489252
Kind regards
Sheena
-
Xbox Music does not update, I get the 0x8024001e error code after a certain time.
When I got to my computer (it is a Samsung series 3), none of the applications would update. I reset the computer and all but one app update: Xbox Music. I can install any other application and update other applications, but when I try to update, it just be said pending, download (which is not actually download), or that it can not be installed, and then I get the 0x8024001e error code. Rather aggravating.
She updates. I don't know why, but he just decided to update this morning.
-
I am trying to download apps and I get the A12E5 error code
I am trying to download apps and I get the A12E5 error code
I solved the problem. I had to first download the creative cloud application and then install other apps of the creative cloud app.
-
I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?
You have Outlook open when you save? You need to close.
Hope this helps
Post back if necessary
___________________________________________________________
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
When I try to install MediaMonkey, I get the following error code: 0 x 80080206
When I try to install MediaMonkey, I get the following error code: 0 x 80080206
Original title: error code 0 x 80080206
Hi Thomas,
I suggest you try the procedure described in the article and see if it helps.
Why can't find or install the application on the Windows Store?
http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
I get the following error code 80070bc9 when you try to do window upsdates
I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.
Hello Kristen,
Follow the steps mentioned below:
Step 1:
Temporarily disable or uninstall the security software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Step 2:
Reset components Windows Update the link below:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.
Hope this helps
-
Whenever I try to install these two windows automatic updates, I get the 8024200d error code
I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.
Hi BobTheDude,
I suggest you to follow these steps and check if it does the work for you:
· Follow the resolution 2 in the article
http://support.Microsoft.com/kb/947366· Download and install the latest Windows Vista application compatibility update in the link mentioned below:
http://support.Microsoft.com/kb/963699· Rename the Catroot2 folder
To rename the Catroot2 folder, follow these steps:
1.
Click Start type cmd and then click OK .
Right click on cmd and then click run as administrator .2.
At the command prompt, type the following commands and press ENTER after each line:
net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output· Empty the software distribution folder
1.
Click Start type services.msc , and then click OK .
Click right services.msc and then click run as administrator .2.
In the Services (Local) pane, click automatic updates , and then click stop .
3.
Reduce the Services (local) window.
4.
Select all the contents of the Windows distribution folder, and then delete them.
Note By default, the Windows distribution folder is located in the
drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.5.
Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
6.
In the Services (Local) pane, click automatic updates , and then click Start .
· Disable security software
· You can download and install the stand-alone package includes updates that failed
KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=enPlease let us know if it helps.
Thank you and best regards,
David -
Cannot install full App Manager - get the A12E1 error code
After you download the Adobe Application Manager on my Mac Pro (Lion 10.7.3), I run Setup from the disk image. She starts and finally asked my admin password. I give it, and then get the following error screen:
"We encountered the following problems:
"Sorry, the program is not responding properly (error code: A12E1).
What's not? I can't say what kind of program does not respond, and you are looking for the error code is not much light. Any help would be greatly appreciated.
Thank you in advance.
-Taz
P.S. I have CS5 installed on my machine. I'm not likely to remove up to 6 works correctly.
SOLVED!
I have downloaded and run the Adobe Creative Suite Cleaner tool, cleared out everything that it displays and then tried again 2 installer. Seems to have worked! It is downloading apps now. If it fails, I'll post again. Otherwise, thank you very much!
-
Cannot install update kb2633952, 0x8007F0F4 error code. the firewall is disabled. can you help me get this installed?
-
I get the following message
Also get the red shield with X saying if off automatic updates.
Tried fixing it by going to control panel, but it does not allow me to change the settings
[Error number: 0 x 80070424]The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
Hi, I found the answer! Right click; Start, then on run, copy and paste this command, click OK. Problem solved!
Bill
% SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL
-
I can't play a dvd I get an C00D116A error code.
Hello
If XP, Vista, Windows 7 or Windows 8 error usually means that duty to update
the video driver.Check with support of the manufacturer of the system (motherboard for custom systems manufacturer) updates
the video device and/or the manufacturer of the real video device like ATI, Nvidia or Intel.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
Mac Pro 2013 (3.7 GHz Quad-Core Intel Xeon E5)
My Mac Pro running El Capitan (10.11.6) and has 12 GB 1866 MHz DDR3 ECC memory. Recently, it runs very slowly. Much slower than my laptop. Any suggestions on what is happening and what I can / check? Thanks in advance, Pedro
-
For months its been my firefox browser is out of date, saying tour so, today, I finally managed to update but when trying to install it, it removed my old version and when I tried to install the new one it says it was not compatible. So now I have a
-
NETGEAR engineering connection user name
I got a Netgear DSL from my ISP modem. I have Netgear genius installed on my PC. For some reason the username of my Netgear router is Admin with A capital rather than admin. I have no option to change the user name in Netgear genius, so I can't conne
-
209 hardware device para windows para photosmart ultimate 64 solo me reconoce el escaner
Como puedo instalar HP photoesmar B 209 en windows ultimate 64 bit solo me reconoce el escaner
-
files or folders displayed even after deletion. Refreshing will delete file or folder deleted
Whenever I have delete files or folders, the icon still appears, but when I do a refresh, the icon disappears, which means that it will be deleted. I'm going to my trash and it's always empty after deleting a file, but when I update, the trash fills