KERNEL DATA INPAGE ERROR__STOP: 0X00000007A__ (0XC05B5CC0, 0XC000000056, 0X087D78C0)

I get the following error message, once the lap top boots, it won't let you open one of the applications then freezes the following messages appear...

CAREB 5920 G/5920 SERIES laptop

STOP: 0X00000007A
(0XC05B5CC0, 0XC000000056, 0X087D78C0)

STOP: 0X0000007A

Stop 0x0000007A Code

Pls advise me what 1 better try the solutions are, one of my friends told me to back up all files personal & re install the Windows XP operating system again...

Thank you

J the Vack


The KERNEL_DATA_INPAGE_ERROR bug control has a value of 0x0000007A. This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

André [1]

"A programmer is just a tool that converts the caffeine in code" Deputy CLIP -

Tags: Windows

Similar Questions

  • Satellte M30: BSOD - KERNEL DATA INPAGE ERROR atapi.sys


    I really hope, really, that someone can help me. I'm no computer Wizard, so if you can help please give me simple instructions. My problem is that often my satellite M30 freezes and blue page happens to give me a warning.

    Top of the page is KERNEL-DATA-INPAGE-ERROR, then goes on to say disable Options memory BIOS such as cache or shading, atapi.sys says below.

    So can someone please help.

    Thank you


    Because you are not a computer expert ;) I'll try to write as simply.
    It looks more like a hardware problem as a problem of software!

    But to be 100% sure, you should recover the laptop with the Toshiba Recovery CD supplied.
    This CD will be programmed the laptop back to the factory setting and usually the laptop should work properly after the recovery of the new!

    If you the BSOD will appear again the chances are high that memory, HARD drives and the motherboard is malfunctioning.

    But because you are a beginner, I would not recommend trying to solve this problem yourself.
    In this case, you must contact the ASP in your country!

    Good luck

  • Kernel data Inpage Error... Memory dump... Please help me

    Hi my name is shoaib.

    I am facing a problem of blue screen approximately every 20-40 minutes. I run the memory test and you indicates no error. I check the RAM via the command "mdsched.exe" and she also don't say no found error. But when the blue screen appears it is said on the top of the page "kernel data Inpage Error".

    Please tell me what to do?

    Here is my file link "msinfo32".


    I have not found any "directory Minidump" in C:/windows. Please suggest me what to do. I really need your help. Thank you

    If you stopped crashing run a trace of windows performance when you encounter the problem

    In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

    If you have any questions do not hesitate to ask

    Please run the trace when you encounter the problem

    Hello, I got a screen blue error during the game or just overall being on my pc, but it seems to happen more when I have the game. The code is '0x0000007a (KERNEL DATA INPAGE ERROR)' I did 3 bugs so far.

    1. CHKDSK C: /F /R (

    2 memory diagnostic tool (

    3. fix (when I tried fix it says update applicable to your computer)

    These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

  • Kernel data inpage error foolowed by 0xc0000185

    If this started a few weeks ago about every day or if I get this error called kernel data inpage error http.sys

    I decoded to ignore it because it would just restart it self but since yesterday it happens whenever I start my laptop if his sleep or stop and when it restarts it says my laptop needs to be repaired error code: 0xc0000185 what should I do? I tried check disk but he asked me to make a volume of check on the next reboot and im a little scared to restart im using sfc/scannow and I also checked all my hard drives for errors in the Properties section there were no errors.

    any ideas? IM using a lenovo G510

    2: kd > .bugcheck
    0000007 a Bugcheck code
    Arguments fffff6fb '400c9ce8 ffffffff' c000000e 00000000' 42e19880 fffff680'1939 d 000

    2nd arg NTSTATUS 0xc000000e says a device randomly lost its existence and attempted to be referenced (usually the hard drive).

    2: kd > knL
    # Child - SP RetAddr call Site
    00 ffffd000 ' 22378478 fffff801' 00d869db nt! KeBugCheckEx
    01 ffffd000 ' 22378480 fffff801' 00c739e0 nt! : FNODOBFM: 'string' + 0x1881b
    02 ffffd000 ' 22378570 fffff801' 00c6068a nt! MiIssueHardFault + 0 x 184
    03 ffffd000 ' 22378630 fffff801' 00c55e31 nt! MmAccessFault + 0x5ba
    04 ffffd000 '223787f0 fffff801' 01208f65 nt! MiCommitExistingVad + 0 x 901
    05 ffffd000 ' 22378920 fffff801' 00d694b3 nt! NtAllocateVirtualMemory + 0xfbd
    06 ffffd000'22378 b 20 fffff801'00 d 61900 nt! KiSystemServiceCopyEnd + 0x13
    "ffffd000 07 ' 22378 d 28 fffff801 ' 010983bd nt! KiServiceLinkage
    ' ffffd000 08 ' 22378 30 fffff801 d ' 0102903d nt! RtlCreateUserStack + 0x19d
    09 ffffd000 '22378e20 fffff801' 0101f685 nt! PspAllocateThread + 0 x 385
    0a ffffd000 ' 22379080 fffff801' 0101f327 nt! 0x1f1 + PspCreateThread
    0 b ffffd000 ' 22379340 fffff801' 00d694b3 nt! NtCreateThreadEx + 0x21f
    0 c ffffd000 '22379a 90 00007ffe' c1691cda nt! KiSystemServiceCopyEnd + 0x13
    0d 00000032' 00000000 00000000 '0x00007ffe' c1691cda of 739aee08

    Looking at the stack, we have created a thread that was used to allocate virtual memory and we went off the rails on chassis #04, committing existing an existing virtual address.

    In fact, I think that this may be a side effect of an AVG bug, rather than a bad hard drive. I would recommend remove AVG first and see what happens.

    -AVG removal

    Windows Defender (how to activate after removal)

    A.Navigate ofControl Panel (with icons). You can do this by typingStart > Search > Panel. Once in the Control Panel change the drop-down menu of thecategory to large or small icons.

    B.Among list icons, and then click Action Center.

    C.Assuming that the deletion of your previous anti-virus software has gone well, you will notice for unexpected and spyware software (important) protection and Virus protection (important), it will have a button that says turn on now. Click on this button (no matter that, as Windows Defender is as well used in Windows 8/8.1).

  • kernel data inpage error spaceport sys


    I just got a new pc, and whenever I stopped and it starts up again, I get an error: kernel data inpage error spaceport sys

    and the computer just start windows normally.

    What to do / how to fix it?

    Good morning Martine.

    For more information, see the error below:


    7 has error checking, {fffff6fc40009b08, ffffffffc0000185, 1 c 2042860, fffff880013617ec}

    GetPointerFromAddress: unable to read from fffff80151b76170
    WARNING: Unable to verify timestamp for win32k.sys
    ERROR: Module load completed but symbols can be loaded for win32k.sys
    Probably caused by: memory_corruption

    Follow-up: memory_corruption

    0: kd >! analyze - v
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *

    The requested page of kernel data could not be read in.  Usually caused by
    a bad block in the disk controller or paging file error. See also
    If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
    This means that the disk subsystem has suffered a failure.
    If the status of the error is 0xC000009A, it means the query failed because
    a file system has failed to move forward.
    Arg1: fffff6fc40009b08, type of lock which took place (1,2,3 or PTE address value)
    Arg2: ffffffffc0000185, error state (state code of e/s normally)
    Arg3: 00000001c 2042860, the current process (virtual address for the lock type 3 or PTE)
    Arg4: fffff880013617ec, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

    Debugging information:

    Error_code: (NTSTATUS) 0xc0000185 - peripheral of e/s reported an IO error.


    It seems that you have a bad hard drive or RAM module in your new system (ran 6 hollow landfill WinDBG), since it is a new system, I would bring her to the store you bought and let replace it.

    Read this guide on how to test your RAM Modules:

    Read this guide on how to test your hard drive:

    Personally, I'd suggest to return the computer to the store and allow them to correct the problem, apparently not driver related to me (especially if you updated all..), it seems that you have a malfunction of the equipment.

    You can try and run CHKDISK (, but I suggest you RMA your system and let check the RAM and hard drive.

    If however, you want to ensure that it is not Windows, then reinstall Windows and see if the problems come back, but I bet they will be.

    I know this answer might not be what you want... but...


  • Windows 8 Kernel data Inpage error blue screen?

    I keep coming the blue screen and with an error message saying "Kernel data inpage error" and it's really annoying because its so common and when the error occurs, it just reboots my computer everything and removing all my unsaved work. It becomes really annoying that it happened 5 times yesterday before I got bored and did a reset. After the factory reset - I still continue to get the error message. How can I fix it?


    Thanks for the reply.

    I suggest to start the computer in a clean boot situation and then try to uninstall the game.

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

    Note: Please refer to the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

    Let us know the status of the issue.

  • screen blue error-kernel data inpage error

    I am using windows 7 Home premium. I use malwarebytes antivirus with the basics of microsoft security.

    When I started the full scan with malwarebytes, it freezes when scan reach for microsoft windows windows/winsxs command orders something folder and unresponsive.
    at the beginning I had the Blue error screen like the kernel data page fault. after it has been switched off manually windows that I started start a new search. scan froze on the same folder and I have been unable to stop the system. What happens when I start to scan with malwarebytes. scanning gets stuck at the same point.
    What is hardware problem or virus problem? and how to fix this?


    There was an error with the disc material.  I would start by running CHKDSK

    Error_code: (NTSTATUS) 0xc0000185 - peripheral of e/s reported an IO error.

    DISK_HARDWARE_ERROR: Error occurred with disc material

    CHKDSK /F /R
    CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
    Run CHKDSK /R /F from a high command (run as administrator).
    Do this for each hard drive on your system.
    When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

    Then restart and let the test to run.
    It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.

    See "CHKDSK LogFile' below to verify the test results.

    CHKDSK LogFile:
    Click Start and type "eventvwr.msc" (without the quotes) and press enter
    Expand the topic the Windows logs, and then select the Application log file entry.
    Double-click the Source column heading.
    Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
    Copy / paste the results in your next post.

  • Kernel data Inpage Error in Windows 8

    My laptop HP Pavilion with Windows 8 pro g6 and gives me a BSOD with a "kernel_data_inpage_error".

    Can someone help me, please?
    My DMP here files

    My laptop HP Pavilion with Windows 8 pro g6 and gives me a BSOD with a "kernel_data_inpage_error".

    Can someone help me, please?
    My DMP here files

    There are two important bugs in the dumps provided. Bugcheck 0x10E (VIDEO_MEMORY_MANAGEMENT_INTERNAL (10th) and kernel_data_inpage_error (0x7A) )

    The video memory manager met a condition that it cannot recover from. By crashing,
    the video memory manager tries to get enough information in the minidump such as
    can someone identify what lead to this condition.
    Arg1: 0000000000000024, the subtype of the error checking:
    Arg2: fffff8a00ddf1010
    Arg3: fffff8a00ce4ca30
    Arg4: 0000000000000000

    fffff880 '03-22768 fffff880' 039df55d: 00000000' 0000010e 00000000'00000024 fffff8a0 '0ddf1010 fffff8a0' 0ce4ca30: nt! KeBugCheckEx
    fffff880 '03-22770 fffff880' 0381df35: fffff8a0 '0ddf1010 fffffa80' 07ae2bc0 00000000'00000000 00000000'00000000: guard dog! WdLogEvent5_WdCriticalError + 0xcd
    fffff880 '03a227b0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: dxgmms1! VIDMM_GLOBAL: DestroyOneAllocation + 0x56d

    dxgmms1! VIDMM_GLOBAL::DestroyOneAllocation + 56 d
    fffff880'0381df35 488b8ba8000000 mov rcx, qword ptr [rbx + 0A8h]


    SYMBOL_NAME: dxgmms1! VIDMM_GLOBAL::DestroyOneAllocation + 56 d

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: dxgmms1

    Nom_image: dxgmms1.sys


    FAILURE_BUCKET_ID: X64_0x10e_24_dxgmms1! VIDMM_GLOBAL::DestroyOneAllocation + 56 d

    BUCKET_ID: X64_0x10e_24_dxgmms1! VIDMM_GLOBAL::DestroyOneAllocation + 56 d

    Follow-up: MachineOwner

    Bug Check 0x10E: VIDEO_MEMORY_MANAGEMENT_INTERNAL. (v = vs. 85) .aspx

    Go to HP support and update the display of the Intel drivers and ATI to the latest available versions. If you can't find them there, check out the links below.

    AMD graphics card drivers and software.

    Download INTEL.

    Regarding the kernel_data_inpage_error (0x7A), see Troubleshooting below.

    The requested page of kernel data could not be read in.  Usually caused by
    a bad block in the disk controller or paging file error. See also
    If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
    This means that the disk subsystem has suffered a failure.
    If the status of the error is 0xC000009A, it means the query failed because
    a file system has failed to move forward.
    Arg1:, lock the type that took place (1,2,3 or PTE address value)
    Arg2: ffffffffc00000c0, error (status code from IO normally) State
    Arg3: 000000016cf3e860, the current process (virtual address for the lock type 3 or PTE)
    Arg4: fffff88000f86000, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

    Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR. (v = vs. 85) .aspx

    Resolution error blue screen in Windows.

  • Blue crash screen on Resume from S3, 0x7A (kernel data Inpage Error), probably faulty HARD drive

    I have a laptop HP dv7 (AMD 780 G chipset), who has a problem with the release of the standby mode.  The system hangs on a blue screen 100% of the time when the recovery from the sleep mode.  I suspect that the problem is related to hard disks turn does not quickly enough during an attempt to wake from its slumber, but I can't be sure.

    My system is running a Seagate Momentus XT 500 GB hybrid drive that the system, which makes me part of the problem.  It doesn't have the latest firmware loaded on the disk (SD28).  The system also carries a secondary drive of 250 GB seagate, but I tried to boot the system without this drive installed to see if the problem persists, try what he does.  I've done the minidump file available here:


    The attached file of the DMP is the error checking KERNEL_DATA_INPAGE_ERROR (7A) .

    The data page of the kernel of the required paging file could not be read into memory.

    It may indicate that the hard disk has bad sectors, problems of material (disk, controller, memory), an infection by the virus or a bug in a device driver.


    If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,

    Error_code: (NTSTATUS) 0xc000009d - STATUS_DEVICE_NOT_CONNECTED

    There was error with disc material


    Start > Search bar > type cmd right click and select run as administrator

    High CMD should now be open, type the following:

    CHKDSK x: /r

    x involves the reader of your letter, so if your hard drive in question is the letter c, it would be:

    CHKDSK c: /r

    Restart the system and allow to run chkdsk.

    2 check the physical connections (cables SATA, etc.) on the disk.

    Kind regards


  • BSOD Windows 7 (kernel data Inpage Error) random

    Windows 7 32 Bit Pro with an AMD Athlon II X 2 255 CPU with 3 GB of ram and an OCZ 120 OHS 3.11.

    I just read the recent post on this on 5 March and I was also very recently put randomly shut downs but no BSOD so occasionally with core data by Page fault with an error 0x0000007A.

    Have just run check that you recommended in this post and got a BSOD on reboot with him saying "windows has stopped for IO has detected an error in the pilot..." 0x00000C9 error code.

    I have the mini zipped and loaded to face book here dump file

    Any help is appreciated.

    Thank you

    Fantastic, thanks for the update! I'm happy to hear.

    If you are comfortable and feel that your problem has been resolved, I recommend you to mark all messages from my friends who responded to your question as answered so this thread is no longer present as requiring a response.

    Kind regards


  • L50-B-166 satellite shows "BSOD kernel data Inpage Error"?

    Good evening

    a few days ago the new laptop (Toshiba bought 3 months ago!) with 64-bit Windows 8.1 gives me every now and then this problem or to restart or by forcing the power button then restarting it myself! Is it possible that you can already be broken hard drive or ram? It's brand new, laptop I can solve everything with CCleaner and Anti-Malware or is there more?

    Thank you!

    To be honest I don't think that there is a hardware problem and you can test if you reinstall original recovery image that you got with your machine.
    Can you please tell us which laptop model you have and since when did you notice this problem?

    I can't imagine that this problem is on the first day because the version of the OS preinstalled is tested. All of us has preferred settings or use of software that may be responsible for various software issues.

    On this virtual path, it is not easy to tell exactly what is happening.
    Can you please post specific technical information (STOP: 0 x 000...) watch with BSOD?

  • Blue screen Vista Kernel data Inpage Error

    Apparently, I have some bad sectors or something on my HD.  By knowing the BSOD, is it possible to partition the wrong part of the HD, reformat a different partition and reinstall Vista to eliminate the problem?  I have enough room to do it, but want to know if it will work until I'm in the effort of all.

    Hello PJMaxw,

    If there is a bad sector on the disk, then it is likely that there are more.

    With the bluescreens seeming to be varied and random, I recommend you contact Dell for assistance with the material side of this.

    Let us know what they say.

    Best regards


  • I get the bsod with the error of the kernel data inpage error.i seem to get more when im doing a virus scan so I changed my anti-virus software, but I still get the same error.

    I tried a system restore, but that did not using a computer hp laptop with a 2.0core 2 duo on vista Home premium with 2 GB of ram.


    It is possible that these are false positives, but I didn't.

    Have you run Malwarebytes, MRT, and UnHackMe gives you all the options? Can you do that in Mode safe?
    Can you get online in Mode safe mode with networking and try online Scans? No tool for a deletion will probably be
    Download them all. You can also try SpyBot and SuperAntiSpyware. There are also other tools on the RootKit
    You can use the list.

    Below must be carried out if necessary AFTER all others above have been tried.

    SpyBot - free

    If you keep SpyBot you will need to set the SDSB Service Manual and STOPPED and do not use TeaTimer-
    or you can scan with it and then uninstall it.

    SuperAntiSpyware - free

    Even here - he has a resident part that can cause some problems so either stop those or uninstall after scanning.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • kernel data inpage error on new dv7 - bsod

    Hi all

    I had this error once last week and thought it was nothing to worry about. This weekend I had several times. It seems that I can do any number of things, including using chrome, and I'll get this blue screen of death. I ran chkdsk and it initially found errors, but since then nothing. Any ideas on what's going on? Note, I got my 21 days for return in 2 days will be call hp tomorrow if I can't achieve progress today. If I can't fix it tomorrow it is maybe go back. I've only had it for 2 weeks (it took a week to get to me).

    Here is the error:


    0x0000007A (0xffffffffc000009d, 0xfffffa800c0ae078, 0 x 0000000000000020, 0 x 0000000000000000)

    physical memory dump failed with status 0xc000009c

    does anyone have any suggestions? I ran the windows diagnostics, but it has only detected the error wireless I had. Anyway, any help would be great


    303 code is a short HDD test failed, so it would seem that the reader has a physical problem and needs to be replaced - as you are still within the time limit to have the phone replaced, that's what I highly recommend do you.

    Kind regards

    DP - K

Maybe you are looking for