Kernel panic reproducible when using VMWare Fusion and Cisco VPN

I can reliable reproduce a kernel panic when I use VMWare Fusion and Cisco VPN set.

Using either done alone causes no problem.

I'm on a mac book pro using the latest updates from Apple for Leopard.

My question is: How can I report this to VMWare without having to pay for support?

When I go to the VMWare fusion support page he wants me to pay for an incident.

I really do not want to pay them to help solve a kernel panic.  (They pay me .)

Announcing the details here (don't forget to join the panic.log as in HOWTO: ask (and answer) Questions) will work.

Tags: VMware

Similar Questions

  • Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

    Hi all

    I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

    I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

    Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

    Thank you very much in advance.

    Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

    1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

    2. connect the sensor to the host (Mac) Port Ethernet card.

    3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

    4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

    5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

    Example:

    The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

    Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

    Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

    In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

    BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

    This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

  • VMware fusion and installation of Fedora 14

    I use VMware fusion 3.1.1 on a new imac 27 "core quad 16 gig ram computer, and I am trting to install Fedora 14 as a virtual machine, using the fedora DVD i386 version.

    If I use the ISO image or a DVD image based that I get the same error came.

    Anaconda 14.22 of the fedora installation system running - please wait

    The following error was found during the analysis of the kickstart configuration file

    The following problem occurred on line 65 of the kickstart file:

    The article does not end by %% end.

    Does anyone know what I have to do--in terms of simple beginner - how to get setup to succeed?

    I reported on bugzilla

    those who say:

    Yes, vmware should start putting end % at the end of their kickstart files.

    This is a warning for the last two years, four or five versions of Fedora.

    and a version of RHEL.  It is now an error.

    So is this a case of Vmware does not solve a known problem?

    I would like to know if there is a fix I can do.

    Thank you

    sysprobs wrote:

    Yes, easy install does not work in Fedora 14 with the final product of VMware.

    I don't know that you would have downloaded correct 32 bit or 64 bit versions.

    In addition, install VMware tools is the problem here, in any case I succuessfully installed using method.

    VMware Tools on Fedora 14

    Another way to get everything working in an installation of Fedora 14 is to start here: http://download.fedoraproject.org/pub/fedora/linux/releases/14/Fedora/i386/iso/Fedora-14-i386-DVD.iso which is to halfway down the page here: http://fedoraproject.org/en/get-fedora-options#formats. You need to do a manual installation for easy install does not work. But the thing is that when you are offered the possibility of a customized installation that chosen, then install everything listed in the developer section. I suspect only a couple offered packages are needed, but not being is not an expert, I don't know which ones to Linux. However, install all packages provide what the installer seek the end of the installation tools and everything I tried works, including the shared folder.

  • How to do a clean reinstall of vmware fusion and windows 7 x 64? Please HELP back to HAppy

    Initially, I installed vmware fusion and windows 7 x 64 about 2 to 3 months ago. Everything was fine until quite recently when vmware or windows has become very agitated and would freeze on me after 2-3 minutes whiles work in windows 7 and the merger. Will have to restart merger every 2 to 5 minutes or more.  So as a result, I went to my local apple store (thinking that I had a problem to apple/mac) and they recommended I uninstall windows and vm fusion. then re-install fusion vmmware and windows .Although this second time I missed something because instead of installing windows taking under an hour and a half, the facility has taken from one day to the next and never finished.

    When I rebooted vmware, I get the message.

    Fusion 3.0 or 3.1?

    "The computer restarted unexpectedly or encountered an error."  Windows cannot continue. To install windows click ok to restart the computer, and then run the Setup again. »

    How to return to a functional copy of the fusion of windows 7x64and the first time I installed windows, 2 to 3 months ago, that it took me another installation of winds article take the day after and don't ever finish?

    PLEASE NOTIFY

    brian35

    VMware Fusion (menu bar) > help > Search > type uninstall, then select uninstall a Virtual Machine by our care...

    There are two...

    Uninstall a Virtual Machine using the Finder

    Uninstall a Virtual Machine by using the Virtual Machine library

    The go back and select uninstall VMware Fusion

  • How to use the Fusion and my whole bootcamp partition?

    Here's what I want to do...

    I have a bootcamp with Windows XP partition on this already...  I installed merger and created a brand new Windows XP on it and everything goes smoothly.  There are times when I want to start windows in my score so I can play my games without having to run two operating systems at the same time.

    I was able to do this with Parallels for a long time, but I have since then switched.  My question is...  How to use my bootcamp with merge partition?  I just want to be able to run Fusion when I'm not playing games, and when I am, simply restart so I can get my complete resources of computers.

    Well, the reason why you did not see the Virtual Machine library window was because the Windows XP Home Edition virtual computer is configured to start automatically when the merger opens such indicated by the orange and white star.  By clicking on the orange/white star if he stops automatically load and clicking on the blue/white star it will become orange/white

    Just a little note... The CONTENT on Bootcamp is not what I want to use. I want to use Windows XP from VMWare Fusion I have done, but on the training camp of partition.

    Based on what you said it sounds like what you want to do a (Virtual, physical) V2P transfer and while this is feasible technically is not necessarily a simple process and V2P requires that the source properly prepared to be transferred to a different material and then an Image created, and then loaded into the Boot Camp partition.  It is outside the scope of his abilities and VMware Fusion and requires the use of tools 3rd party and knowledge of such a process of preforms.  IMO, if one may wonder how to do that, so it's just better than you manually rebuild the Boot Camp partition to suite your needs if the current configuration does not meet your needs.  That said a clean generation always produces a less problematic situation and provides long-term for a better overall performance however if you want to search the forum or Internet V2P or physical Virtual you can find more information on what it has been covered before.

  • Problem with windows using vmware fusion

    I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

    Thank you

    Debbie

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question.

    I suggest you to consult the steps mentioned in the article:

    EXE by default association problem windows7
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

    Hope this information helps.

  • When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.

    Go to sky

    When using Sky go and try to watch movies or programs how do I get to run continuously without interruption and catch every few seconds.

    The usual cause of this is that your broadband connection is not fast enough or you have multiple computers, try to use it at the same time.

    This allows to check your speed broadband http://www.bbc.co.uk/iplayer/diagnostics#results

    If the broadband speed does not seem to be the problem, please contact Sky

    http://helpforum.sky.com/T5/using-Sky-go/BD-p/skygo_using

  • just upgraded to ch 2014, when using contact sheets and by adjusting the results of font sizes in the spacing between the images bigger and bigger while the size of police remains the same. See you soon,.

    upgrade to ch 2014, when using contact sheets and by adjusting the results of FontSize to spacing between the images grows while the font remains the same size.

    Someone at - it ideas on why this is happening.

    See you soon,.

    PAul

    Hi Paul,.

    There is a bug in the script that affects text attributes. We are now studying.

    In the meantime, xbytor updated the plug contact to work around the problem. You can find it here: ContactSheetX 2.1 released

    Kind regards

    Steve

  • RT for Windows and Cisco VPN (AnyConnect) Solutions?

    Microsoft and Cisco are working together to ensure Cisco VPN is soon available for Windows RT?  I read a thread RT of Windows from Microsoft and Cisco VPN without seeing all the comments of Microsoft or Cisco.  Please notify.

    Hi Gabriel,

    The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

    http://social.technet.Microsoft.com/forums/en-us/categories

  • USB air card causing kernel panic only when you run Merge 4.1.1

    I got from many kernal panics when Plug and unplug an aircard for Sprint USB 3 G / 4G Wireless U250 Sierra when I merge 4.1.1 also running on Lion 10.7.2. The card taken aircard inside and outside without any problem in Leo until I opened the merger and works very well. When I do I immediately get the kernel panics. It made me lose many files on the virtual machine since the last snapshot, I had was at the end of November 2011. The Genius Bar told me that it was caused by Fusion and contact VMware or Sierra Wireless for help. I would use the card aircard on Lion and Fusion, but if I have to I it will cut merge if I have to and if possible. I see the report appear in the parameters of Fusion as a USB connection just before it crashes. I have attached the last log of kernel panic I. Any help or ideas would be appreciated. Thank you!

    I solved the problem on my Macbook with rachidoss tip!  I am writing this post now using my Sprint air card that I plugged in while the merger was running - no kernel panic!

    Angelsfan1, here's what you need to do:

    1. Install the SmartView 2.6
    2. Open Finder and go to system > Library > Extensions
    3. Copy the Beceem kext on your desktop and then trash the one installed in the Extensions Directory
    4. Right-click on the kext that you copied and "show the contents of the package.
    5. Open the file info.plist with TextEdit or another editor
    6. Carefully remove all the 28 entries following 2 lines:
    7. IOMatchCategory
      com_beceem_BeceemAppleWiMAXAdapter
    8. Save the file.
    9. Install updated to the kext.  For this you will need a free kext Installer.  I used Kext drop, but there are tons of free.
    10. The newly installed kext should now appear in the system > library > Extensions Directory.
    11. Reset
    12. SmartView open and connect!

    Thanks again for the tip and all the research done by your team of rachidoss!  And thank you for starting this thread Angelsfan1!

  • The mouse loses accuracy when running VMware Fusion in Unity view

    When I try to select items on the screen after the execution of the unit for a minute, the things I would not choose are selected.  It almost seems as if the precision of the mouse is at a loss.  Everyone knows this, and if so, do you have a solution?

    Hello

    Thank you for using the merge!  Could you please try the following suggestions to see if that helps you?

    Please try to reset the option gaming mouse by VMware Fusion in Apple menubar-> preferences-> General-> Gaming, change the option 'never optimize mouse for games '.

  • Impossible to use VMWare Server and Virtual PC at the same time?

    I have a Win 7 box I use VirtualPC (unfortunately, VPN to the employer only supports the 32-bit Win XP).

    If I try to start any virtual machines using VMWare Server, power on and then immediately off.  Tried several different VMs.

    However, if I disable VirtualPC, they all work normally.

    Then... there at - it a known issue with the help of Virtual PC and VMWare Server at the same time?

    BTW, I didn't see this problem when you use Virtual PC and VMWare Player at the same time.

    VirtualPC leaves the CPU of the exploitation of VMX root, which is a restricted mode.  VMware Server is problems to switch between legacy mode and long (this switch is prohibited when the CPU is in VMX root operation).  The current versions of the workstation and the player are able to circumvent this restriction.

  • VMware Fusion and Macbook Pro bi - GPU.

    Hey you guys,

    I have vmware fusion before on my white macbook. I was watching the bi - GPU 17 "Macbook Pro and

    I was wondering witch GPU would have use of VMware if I installed Windows XP on double 17 GPU "Macbook Pro.

    The GPU on board is a NVIDIA GeForce 9400 M... The dedicated is an NVIDIA GeForce 9600 M GT.

    Waiting for answer,

    Thank you

    P.S. The VMware rules

    N ° all THE graphics are emulated, and all instructions are carried out by the host CPU.  Well, technically, the graphics are drawn to the video card in the host / drivers... video and 3d graphics require certain levels of video hardware and driver support.  So if you want 3d graphics in your comments you will need a video card that can support it. but I think that NVidia card, you mention will support him.

  • Deal with failure when using LabVIEW 2011 and DSC MODBUS communication

    I'm currently reading from operating records a PLC with MODBUS/TCP. I confirmed that the PLC will update the values and in response to a MODBUS communication correctly by using a third-party program called Modbus Poll. However, when I try to query the PLC using the LabVIEW shared variable engine, I am unable to read the values of the same addresses that I consult with Modbus Poll.

    My installation is simply to a PC directly connected to the controller via Ethernet without a router between the two. I'm using LabVIEW 2011 SP1 with the DSC module.

    I opened the Manager of distributed systems OR to display the State of all variables in the Modbus Library that I created, and I noticed that the ILO CommFail permanently the value 'true '. All other variables with a 'read' access mode signal "failure of process". I tried to restart the process and stop and start the local variable engine without success. I also restarted my computer several times to see if any services did not exist, but this does not appear to have solved the problem.

    Finally, I resorted to listening to communications on the network card I have the PLC connected via Ethernet using Wireshark and found that while Modbus Poll communicates with PLC, number of MODBUS and TCP packet is sent and received. However, when using only LabVIEW or the DSM OR communicate with the controller, there don't seem to be any communication on the network card.

    Something that may be interesting to note is that I could communicate with the PLC and to read values with the DSM just once, when I understood everything first what address I should be reading of. All of this has stopped working shortly after. Prior to this, 'CommFail' was not generally set to 'true' with my current setup. Thinking it was my firewall, I have since disabled my firewall, but this seems to have had no effect on the problem either.

    Any help on this would be appreciated.

    So, I thought about it. It turns out that the IP address of the server i/o MODBUS must be set to the address of the MODBUS slave, not the local computer. The address of the i/o MODBUS server is defined by the navigation in the Explorer window projects, expanding the variable engine shared library for MODBUS and right click on the server MODBUS (for example Modbus1) item and select Properties.

    In addition, the addresses seem to be shifted by + 1.

    Thanks for the tip so.

  • When using the merge and when to use updated

    Hi friends,

    Given the best performance... purpose of this discussion is when we should use statement UPDATE and when we should use MERGE statement in oracle update of thousands of records.

    Kindly Guide.

    Kind regards

    Himanshu

    Hello

    Looking for a couple to a few rules that you can use to decide whether to use the MERGE or UPDATE, without actually testing two meanings?

    If so, use MERGE when

    (1) (sometimes) need to add new lines

    (2) it is simpler.  This includes special cases

    (2A) an UPDATE statement uses a subquery in the SET clause and then (mostly) repeats the same subquery in the WHERE clause

    (2B) you want to use the analytical functions or CONNECT BY in a subquery

    These rules are NOT guaranteed to work in all situations.

    Kimmy says:

    Hello

    ... My requirement is only UPDATED records about 200 to 500K (NOT followed by update of insertion).

    So the rule (1) above does not apply in this case.

    What I observed in the update using a MERGE statement and UPDATE is:

    Update with the MERGER was faster however explain the bytes consumed to the query plan MERGE has been compared more update.

    Use the tool that works best for your needs.  If users are complaining that something shows more bytes used in a plan to explain, so maybe it's a reason for the UPDATE.

    Where I work, where is the fastest is usually more important.

    In addition, I want to get clearity

    1. "if I should use MERGE if I need to update recrods using the unique table" as shown below: OR update will be good to use in this case:

    MERGE INTO MKT_DATA inmkt

    C using (SELECT Customer_Code, region, State OF CUSTOMER_DATA)

    ON (inmkt. Distributor_Code = c.Customer_Code AND inmkt. DISTRIBUTOR_CODE IS NOT NULL)

    WHEN MATCHED THEN

    Updated the inmkt VALUE. Distributor_Region = c.Region,

    inmkt. C.State = Distributor_Province;

    UPDATE MKT_DATA inmkt

    SET (inmkt. Distributor_Region, inmkt. Distributor_Province) =

    (SELECT c.Region, c.State OF CUSTOMER_DATA c

    WHERE c.Customer_Code = inmkt. Distributor_Code)

    WHERE inmkt. DISTRIBUTOR_CODE IS NOT NULL;

    2 statements above are not equivalent.

    The UPDATE statement changes all the lines in the table mkt_data that have a distributor_code, this distributor_code be in the table customer_data or not.

    You want something that is equivalent to the MERGE statement, you can use:

    UPDATE MKT_DATA inmkt

    SET (inmkt. Distributor_Region, inmkt. Distributor_Province) =

    (SELECT c.Region, c.State

    OF CUSTOMER_DATA c

    WHERE c.Customer_Code = inmkt. Distributor_Code

    )

    WHERE THERE ARE

    (SELECT 1

    CUSTOMER_DATA C2

    WHERE the c2. Customer_Code = inmkt. Distributor_Code

    )

    ;

    It basically uses the same auxiliary request 2 times (article 2 (a), so I would use MERGE if these are the results I wanted.

    If you have a foreign key constraint, which ensures that each distributor_code in mkt_data will match a line in customer_data, then the 2 statements above will produce the same results.  In this case, I find the UPDATE statement simpler and probably use it rather than MERGE.

    2. to Updating huge amount of records MERGER must be used instead of update?

    I don't know of all short reign as the "use X whenever you have more than 100,000 lines".

    3. If in the update, I need to use several tables then I have to use MERGE?

    MERGE IN MKT_DATA2 t

    WITH THE HELP OF)

    SELECT DISTINCT srt. Sales_Id, tmkt. Cust_Code, srt. PRODUCT_CENTER

    OF srt, CUSTOMER_DATA c, MKT_DATA2 tmkt SALESTERR_PL

    WHERE tmkt.state_Id = 10423

    AND tmkt. Business = 'MARKETING'

    AND c.CUST_CODE = tmkt. Cust_Code

    AND c.Rollup_Code = srt. CUST_CODE

    AND srt. PRODUCT_CENTER = tmkt.PL

    ) d

    WE (t.state_Id = 10423

    AND t.BA = 'MARKETING'

    AND t.Cust_Code = d.Cust_Code

    AND t.PL = d.PRODUCT_CENTER

    AND t.Cust_Code IS NOT NULL

    )

    WHEN MATCHED THEN

    UPDATE SET t.Sales_Id = d.Sales_Id;

    UPDATE MKT_DATA2 tmkt

    SET Sales_Id = (SELECT SALES_ID OF SALESTERR_PL srt

    WHERE the srt. CUST_CODE = (SELECT ROLLUP_CODE FROM CUSTOMER_DATA c

    WHERE c.CUSTOMER_CODE = tmkt. Cust_Code)

    AND srt. PRODUCT_CENTER = tmkt.PL)

    WHERE business = 'MARKETING'

    AND state_Id = 10423;

    Once again, those who are not equivalent.  The UPDATE statement can change more lines than the MERGE statement.

    In addition, you can use the MERGE statement:

    MERGE IN MKT_DATA2 t

    WITH THE HELP OF)

    SELECT DISTINCT srt. Sales_Id, tmkt. Cust_Code, srt. PRODUCT_CENTER

    OF srt, CUSTOMER_DATA c, MKT_DATA2 tmkt SALESTERR_PL

    WHERE tmkt.state_Id = 10423

    AND tmkt. Business = 'MARKETING'

    AND c.CUST_CODE = tmkt. Cust_Code

    AND c.Rollup_Code = srt. CUST_CODE

    AND srt. PRODUCT_CENTER = tmkt.PL

    ) d

    WE (t.Cust_Code = d.Cust_Code

    AND t.PL = d.PRODUCT_CENTER

    )

    WHEN MATCHED THEN

    UPDATE SET t.Sales_Id = d.Sales_Id

    WHERE t.state_Id = 10423

    AND t.BA = 'MARKETING'

    - AND t.Cust_Code IS NOT NULL - does not need, said subquery 'c.CUST_CODE = tmkt. Cust_Code ".

    ;

    If you would care to publish the sample data, I was able to test this.

    4. when the UPDATE is preferred over the MERGER?

    In simple cases, including situations where all you need to know are on the line itself, such as:

    UPDATE emp

    SET sal = sal * 1.05

    Job WHERE NOT IN ('MANAGER', 'PRÉSIDENT')

    ;

Maybe you are looking for

  • The end of 2013

    Model by the end of 2013 and newer, "cannot" have a ram upgrade, can? Thank you in advance...

  • The desktop icons to stop after I leave internet. Can use the start menu

    After reboot, all the features of the icon on the desktop.  Inbound and outbound to the internet, I get no response.  The start menu, takes me on the desktop and everything works from here

  • OpenGL will be not updated

    I can't find the update of Windows for OpenGL. I'm playing Minecraft, and I want to continue my journey with her. How can I update?

  • Sleep Mode problems

    Whenever I put the computer on the mode 'sleep', it also puts my monitor on the mode "Eve". When I come back and shake the mouse to wake from sleep the monitor will appear for a little bit and then it happens mode 'sleep' and the only way to have acc

  • When I press the END/PRTSC for print screen button, nothing happens.

    original title: END/PRTSC Key When I press the END/PRTSC for print screen button, nothing happens.  How can I print screen on my new laptop computer?